38 research outputs found
Cellular Glass Manufactured by Microwave Irradiation of Residual Glass, Eggshell and Borax
The paper presents an improved method of manufacturing cellular glass using residual glass (91 %), sodium borate (5 %), eggshell waste (4 %) and added water (9 %). Compared to methods using eggshell as an expanding agent producing cellular glass with low compression strength, the technique adopted by the authors is original by the addition of sodium borate, which contributes to increasing the compression strength and the use of the unconventional electromagnetic wave heating method, which ensures very economical specific energy consumption. The optimal variant of cellular glass had the following characteristics: density of 0.40 g/cm3, porosity of 81 %, heat conductivity of 0.086 W/m路K, compression strength of 4.3 MPa and the cell dimension between 0.3-0.9 mm. The specific energy consumption of the process was 0.80 kWh/kg. The product has adequate features for using as a heat insulation material under conditions of quite high mechanical loading.
 
Foam Glass Gravel Experimentally Made in a 10 kW-Microwave Oven
Abstract
The experimental manufacture of foam glass gravel from glass waste has been quantitatively extended by increasing the power of the microwave oven from 0.8 to10 kW, the authors' interest being focused on the quality of the foamed product. The work equipment was rather improvised, the existing used oven not being adequate except to small extent for the requirements of the experiment, but it allowed obtaining a product similar to those industrially manufactured by conventional techniques. Using a recipe previously tested on the 0.8 kW-microwave oven composed of 1 wt.% glycerol as a liquid foaming agent together with 8 wt.% water glass as an enveloping agent and 8 wt.% water as a binder, the main features of the foam glass gravel lumps were: bulk density of 0.22 g/cm3, porosity of 88.9%, thermal conductivity of 0.057 W/m路K, compressive strength of 5.9 MPa and pore size between 0.10-0.30 mm. The specific energy consumption was negatively influenced by the excessive internal volume of the oven, but even under these conditions its value was relatively low (between 1.53-1.69 kWh/kg)
Unconventionally Made-Cellular Glass Aggregate
Improving the original manufacturing process in microwave field of a cellular glass aggregate using a recipe containing colored consumed drinking bottle, calcium carbonate (CaCO3) as an expanding agent, sodium borate (borax) as a fluxing agent and sodium silicate (Na2SiO3) as a binder is shown in the work. The main adopted technological measures were the advanced mechanical processing of residual glass at a grain dimension below 100 渭m and especially the use of a high electromagnetic wave susceptible ceramic tube with a wall thickness reduced from 3.5 to 2.5 mm for the protection of the pressed glass-based mixture against the aggressive effect of microwave field and, in the same time, to achieve a preponderantly direct heating with electromagnetic waves. Of the tested variants, a recipe with 1.6 % calcium carbonate, 6 % borax, 8 % sodium silicate and the rest residual glass was determined to be optimal. The cellular glass aggregate had the bulk density of 0.22 g/cm3, heat conductivity of 0.079 W/m路K and compression strength of 5.9 MPa. The specific consumption of energy was very low (0.71 kWh/kg) below the range of reported values of the industrial processes consumption (between 0.74-1.15 kWh/kg).
 
Glass Foam Made with Silicon Nitride and Manganese Oxide by Microwave Irradiation
A high mechanical strength (6.1 MPa) glass foam was produced by sintering/foaming at 830 潞C in an experimental 0.8 kW-microwave oven. The basic raw material was a colorless flat glass waste and the foaming agent was Si3N4 powder (2 wt.%). As an oxygen supplying agent, a MnO2 powder (3.1 wt.%) was used. The main physical, mechanical, thermal and morphological characteristics of the optimal sample were: apparent density of 0.47 g/cm3, porosity of 77.6%, thermal conductivity of 0.105 W/m路K, compressive strength of 6.1 MPa and pore size between 0.15-0.40 mm. The optimal glass foam sample has the required characteristics of a thermal insulation material usable under mechanical stress conditions in civil engineering. The originality of the paper is the application of the unconventional microwave heating technique, faster and more economical, unlike the other papers in the same area published in the literature, followers of the traditional conventional heating technique
New Manufacturing Method of Glass Foam by Cold Expansion of Glass Waste
Abstract
An innovation cold manufacturing method of glass foams is presented in the paper. Traditional foaming agents used in conventional expansion processes of glass waste at high temperature were substituted with aluminium powder in aqueous solution of calcium hydroxide, which releases hydrogen forming gas bubbles in the viscous sludge and then, by solidification, a porous structure typical for the glass foam. The manufactured foam is adequate for using as a thermal insulation material for inner wall of buildings, having the apparent density of 0.31 g路cm-3, the thermal conductivity of 0.070 W/m路K and the compressive strength of 1.32 MPa. The process originality is the use of recycled aluminum waste, melted by an own microwave heating technique and sprayed with nitrogen jets. The process effectiveness is remarkable in economical and energy terms
Manufacturing Ceramic Foams at Very High Temperature by the Unconventional Process of Direct Microwave Heating
Abstract
SiC ceramic foams were manufactured by direct microwave heating up to 1520 潞C. Silicon carbide (42-68 wt.%), quartz sand as a silica supplier (20-38 wt.%), coal fly ash (12-20 wt.%) and a constant water addition of 15 wt.% were used as starting materials. The ceramic foam samples had semi-open microstructures in which neighboring cells are partially connected to each other and partially closed. Due to the very dense cellular walls and the very low cells size (below 21 渭m), the compressive strength had very high values (41.3-56.5MPa), the porosity was within an average value range (52.4-57.6%) and the thermal conductivity and the apparent density had relatively high values. In energy terms, the technique of direct microwave heating was very advantageous, the specific energy consumption being very low (1.04-1.21 kWh/kg) compared to the consumptions achieved by conventional methods. The application field of SiC ceramic foams obtained by the bonding method and using silica as a bonding agent includes hot gas or molten metal filters, porous burners, catalytic supports and others. From the four tested experimental variants, it could be concluded that the optimal sample was that achieved at 1520 潞C with 68% silicon carbide, 20% quartz sand, 12% coal fly ash and 15% water addition, having the porosity of 57.6%, thermal conductivity of 0.174 W/m路K, compressive strength of 56.5 MPa and the equivalent pore size between 9-21 渭m
Granulated Expanded Glass Manufacturing Method Using Electromagnetic Waves
The paper presents experimental results obtained in the process of experimental manufacture in a microwave oven of lightweight granulated glass aggregates. The process was conducted to obtain the highest dimensional class (between 18-23 mm), the almost spherical shape of the aggregates being facilitated by cold processing of raw spherical pellets (between 11-15 mm) containing the powder mixture formed by glass waste, borax. calcium carbonate, aqueous sodium silicate solution and water addition and then rotation of the high electromagnetic wave susceptible ceramic crucible containing raw pellets during the heat treatment at temperatures between 822-835 潞C. In terms of quality, the expanded glass aggregate granules are almost similar to those manufactured in conventional rotary kilns heated by burning fuel, having the following characteristics: bulk density of 0.17 g/cm3, compressive strength of 2.2 MPa, thermal conductivity of 0.047 W/m路K, water absorption of 1 vol. % and pore size between 0.3-0.6 mm. The experimental product has not yet been tested as a raw material in the manufacture of some light weight concretes, but the use of similar granulated glass aggregates manufactured in the world confirms the ability of this aggregate type to produce light weight and energy efficient concretes for building construction
Unconventional Technique for Producing Borosilicate Glass Foam
The study aims to test an advanced technique but insufficiently valued in the world in the process of experimental manufacture of borosilicate glass foam. It is about the unconventional technique of heating solids by using the microwave radiation converted into heat. The experimental equipment on which the tests were performed was a 0.8-kW microwave oven commonly used in the household with constructive adaptations to be operational at high temperature. The adopted manufacturing recipe was composed of borosilicate glass waste with the addition of calcium carbonate, boric acid and water in different weight proportions. The material was sintered at 829-834 潞C by predominantly direct microwave heating and the optimal foamed product had characteristics similar to those manufactured by conventional techniques (apparent density of 0.33 g/cm3, thermal conductivity of 0.070 W/m鈥, compressive strength of 3.1 MPa and a homogeneous microstructure with pore size between 0.7-1.0 mm). The energy efficiency of the unconventional manufacturing process was remarkable, the specific energy consumption being only 0.92 kWh/kg
EXPERIMENTAL MANUFACTURE OF THE FOAM GLASS GRAVEL FROM GLASS WASTE AND SILICON CARBIDE ON A 10 kW-MICROWAVE OVEN
The work presents the results of the experimental manufacturing process on a 10 kW-microwave oven of foam glass gravel (FGG) from glass waste (98 wt. %) and silicon carbide (2 wt. %), the sintering/foaming temperature being varied between 910-930 潞C. The paper originality is the significant increase (about 8 times) of the amount of glass-based raw material foamed by the unconventional heating compared to the previous experiments. The main features of the FGG experimental samples were: bulk density between 0.26-0.31 g路cm-3, compressive strength between 8.5-9.7 MPa and thermal conductivity between 0.068-0.077 W/mK, suitable for their use as thermal insulation material in several applications in construction
Granulated Expanded Glass Manufacturing Method Using Electromagnetic Waves
The paper presents experimental results obtained in the process of experimental manufacture in a microwave oven of lightweight granulated glass aggregates. The process was conducted to obtain the highest dimensional class (between 18-23 mm), the almost spherical shape of the aggregates being facilitated by cold processing of raw spherical pellets (between 11-15 mm) containing the powder mixture formed by glass waste, borax. calcium carbonate, aqueous sodium silicate solution and water addition and then rotation of the high electromagnetic wave susceptible ceramic crucible containing raw pellets during the heat treatment at temperatures between 822-835 潞C. In terms of quality, the expanded glass aggregate granules are almost similar to those manufactured in conventional rotary kilns heated by burning fuel, having the following characteristics: bulk density of 0.17 g/cm3, compressive strength of 2.2 MPa, thermal conductivity of 0.047 W/m路K, water absorption of 1 vol. % and pore size between 0.3-0.6 mm. The experimental product has not yet been tested as a raw material in the manufacture of some light weight concretes, but the use of similar granulated glass aggregates manufactured in the world confirms the ability of this aggregate type to produce light weight and energy efficient concretes for building construction.