86 research outputs found

    Spray deposited copper zinc tin sulphide (Cu2ZnSnS4) film as a counter electrode in dye sensitized solar cells.

    Get PDF
    PublishedThis is the author accepted manuscript. The final version is available from the Royal Society of Chemistry via the DOI in this record.Stoichiometric thin films of Cu2ZnSnS4 (CZTS) were deposited by the spray technique on a FTO coated glass substrate, with post-annealing in a H2S environment to improve the film properties. CZTS films were used as a counter electrode (CE) in Dye-Sensitized Solar Cells (DSCs) with N719 dye and an iodine electrolyte. The DSC of 0.25 cm(2) area using a CE of CZTS film annealed in a H2S environment under AM 1.5G illumination (100 mW cm(-2)) exhibited a short circuit current density (JSC) = 18.63 mA cm(-2), an open circuit voltage (VOC) = 0.65 V and a fill factor (FF) = 0.53, resulting in an overall power conversion efficiency (PCE) = 6.4%. While the DSC using as deposited CZTS film as a CE showed the PCE = 3.7% with JSC = 13.38 mA cm(-2), VOC = 0.57 V and FF = 0.48. Thus, the spray deposited CZTS films can play an important role as a CE in the large area DSC fabrication.The work presented in this paper was done under the Department of Science and Technology (DST)–Research Council UK (RCUK) project “Advancing the efficiency and production potential of excitonic solar cells”. Sanjay Kumar Swami acknowledges Ministry of National Renewable Energy (MNRE), New Delhi, India for providing the financial assistantship. Mr. Firoz Alam is also thanks for helping in initial impedance measurements

    TNF-α promoter polymorphism: a factor contributing to the different immunological and clinical phenotypes in Japanese encephalitis

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>More than three billion populations are living under the threat of Japanese encephalitis in South East Asian (SEA) countries including India. The pathogenesis of this disease is not clearly understood and is probably attributed to genomic variations in viral strains as well as the host genetic makeup. The present study is to determine the role of polymorphism of TNF-alpha promoter regions at positions -238G/A, -308G/A, -857C/T and -863C/A in the severity of Japanese encephalitis patients.</p> <p>Methods</p> <p>Total of 142 patients including 66 encephalitis case (IgM/RT-PCR positive), 16 fever cases (IgM positive) without encephalitis and 60 apparently healthy individuals (IgG positive) were included in the study. Polymerase chain reaction restriction fragment length polymorphism (PCR-RFLP) using site specific restriction enzymes were implemented for polymorphism study of TNF alpha promoter.</p> <p>Results</p> <p>Following the analysis of the digestion patterns of four polymorphic sites of the TNF- alpha promoter region, a significant association was observed between the allele -308A and -863C with the patients of Japanese encephalitis.</p> <p>Conclusions</p> <p>TNF- alpha 308 G/A has been shown to be associated with elevated TNF- alpha transcriptional activity. On the other hand, polymorphism at position -863C/A in the promoter region has been reported to be associated with reduced TNF- alpha promoter activity and lower plasma TNF levels. As per the literature search, this is the first study to identify the role of TNF- alpha promoter in JE infection. Our results show that subjects with - 308A and -863C alleles are more vulnerable to the severe form of JE infection.</p

    Racism as a determinant of health: a systematic review and meta-analysis

    Get PDF
    Despite a growing body of epidemiological evidence in recent years documenting the health impacts of racism, the cumulative evidence base has yet to be synthesized in a comprehensive meta-analysis focused specifically on racism as a determinant of health. This meta-analysis reviewed the literature focusing on the relationship between reported racism and mental and physical health outcomes. Data from 293 studies reported in 333 articles published between 1983 and 2013, and conducted predominately in the U.S., were analysed using random effects models and mean weighted effect sizes. Racism was associated with poorer mental health (negative mental health: r = -.23, 95% CI [-.24,-.21], k = 227; positive mental health: r = -.13, 95% CI [-.16,-.10], k = 113), including depression, anxiety, psychological stress and various other outcomes. Racism was also associated with poorer general health (r = -.13 (95% CI [-.18,-.09], k = 30), and poorer physical health (r = -.09, 95% CI [-.12,-.06], k = 50). Moderation effects were found for some outcomes with regard to study and exposure characteristics. Effect sizes of racism on mental health were stronger in cross-sectional compared with longitudinal data and in non-representative samples compared with representative samples. Age, sex, birthplace and education level did not moderate the effects of racism on health. Ethnicity significantly moderated the effect of racism on negative mental health and physical health: the association between racism and negative mental health was significantly stronger for Asian American and Latino(a) American participants compared with African American participants, and the association between racism and physical health was significantly stronger for Latino(a) American participants compared with African American participants.<br /

    Anisotropic nanomaterials: structure, growth, assembly, and functions

    Get PDF
    Comprehensive knowledge over the shape of nanomaterials is a critical factor in designing devices with desired functions. Due to this reason, systematic efforts have been made to synthesize materials of diverse shape in the nanoscale regime. Anisotropic nanomaterials are a class of materials in which their properties are direction-dependent and more than one structural parameter is needed to describe them. Their unique and fine-tuned physical and chemical properties make them ideal candidates for devising new applications. In addition, the assembly of ordered one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) arrays of anisotropic nanoparticles brings novel properties into the resulting system, which would be entirely different from the properties of individual nanoparticles. This review presents an overview of current research in the area of anisotropic nanomaterials in general and noble metal nanoparticles in particular. We begin with an introduction to the advancements in this area followed by general aspects of the growth of anisotropic nanoparticles. Then we describe several important synthetic protocols for making anisotropic nanomaterials, followed by a summary of their assemblies, and conclude with major applications

    Scalable screen-printing manufacturing process for graphene oxide platinum free alternative counter electrodes in efficient dye sensitized solar cells

    No full text
    © 2019 Elsevier B.V. The graphene oxide paste (GO) was prepared by mixing α-terpineol and ethyl cellulose, and GO films was prepared by screen printing on fluorine doped Tin oxide (FTO) glass substrates to validate as an alternative counter electrode material to platinum in dye sensitized solar cells (DSSC). The graphene oxide films were characterised by X-Ray Diffraction, Scanning Electron Microscopy, Raman spectroscopy and the catalytic properties of films were being investigated by cyclic voltammetry and electrochemical Impedance measurements. The DSSC fabricated by coupling TiO 2 films soaked in N719 dye with GO as counter electrode exhibited photoconversion efficiency of 5.58% under standard one Sun illumination, whereas platinum based device showed photoconversion efficiency of 7.57%. The present study suggests that graphene oxide counter electrodes can be considered as a promising alternative to platinum, with further optimisation, which clearly has advantages in terms of its abundance and low cost processing towards industrial prospects

    Teneligliptin in management of type 2 diabetes mellitus

    No full text
    Surendra Kumar Sharma,1 A Panneerselvam,2 KP Singh,3 Girish Parmar,4 Pradeep Gadge,5 Onkar C Swami6 1Diabetes, Thyroid and Endocrine Centre, Galaxy Speciality Centre, Jaipur, 2Aruna Diabetes Centre, Chennai, 3Fortis Hospital, Sector 62, Phase VIII, Mohali, 4Kokilaben Dhirubhai Ambani Hospital, Andheri (W), Mumbai, 5Dr Gadge&rsquo;s Diabetes Care Centre, Mumbai, 6Unichem Laboratories Ltd, Jogeshwari (W), Mumbai, India Abstract: Teneligliptin is a recently developed oral dipeptidyl peptidase 4 inhibitor indicated for the management of type 2 diabetes mellitus (T2DM) in adults along with diet and exercise. Teneligliptin has been recently available in Japan (Teneria&reg;), Argentina (Teneglucon&reg;), and India (Tenepure; Teneza) at relatively affordable price. This is a positive step toward the management of T2DM in developing countries, where the cost of medicine is out-of-pocket expenditure and is a limiting factor for health care. This review evaluates the efficacy and safety of teneligliptin in the management of T2DM. Teneligliptin has been systematically evaluated in T2DM as monotherapy with diet and exercise and in combination with metformin, glimepiride, pioglitazone, and insulin in short-term (12&nbsp;weeks) and long-term (52 weeks) studies. These studies have reported a reduction in HbA1c of 0.8%&ndash;0.9% within 12&nbsp;weeks of therapy. Two 52-week studies reported sustained improvement in glycemic control with teneligliptin. Teneligliptin has been found to be well tolerated, and the safety profile is similar to other dipeptidyl peptidase 4 inhibitors. Hypoglycemia and constipation are the main adverse events. Teneligliptin can be administered safely to patients with mild, moderate, or severe renal impairment or end-stage renal disease without dose adjustment. Similarly, it can be used in patients with mild-to-moderate hepatic impairment. Teneligliptin is effective and well tolerated and may have an important role in the management of T2DM. Keywords: diabetes mellitus, dipeptidyl peptidase 4 inhibitor, newer DPP-4 inhibitor, teneligliptin, Indi

    Scalable screen-printing manufacturing process for graphene oxide platinum free alternative counter electrodes in efficient dye sensitized solar cells

    Full text link
    The graphene oxide paste (GO) was prepared by mixing α-terpineol and ethyl cellulose, and GO films was prepared by screen printing on fluorine doped Tin oxide (FTO) glass substrates to validate as an alternative counter electrode material to platinum in dye sensitized solar cells (DSSC). The graphene oxide films were characterised by X-Ray Diffraction, Scanning Electron Microscopy, Raman spectroscopy and the catalytic properties of films were being investigated by cyclic voltammetry and electrochemical Impedance measurements. The DSSC fabricated by coupling TiO 2 films soaked in N719 dye with GO as counter electrode exhibited photoconversion efficiency of 5.58% under standard one Sun illumination, whereas platinum based device showed photoconversion efficiency of 7.57%. The present study suggests that graphene oxide counter electrodes can be considered as a promising alternative to platinum, with further optimisation, which clearly has advantages in terms of its abundance and low cost processing towards industrial prospects

    Not Available

    No full text
    Not AvailableIn the present study, skin scabs were collected from a total number of 10 severely affected Dromedarian camels (Camelus dromedarius) maintained by the Border Security Force (BSF) of Bikaner, Rajasthan an, India. Two immunomodulatory protein genes, 163R and 201R of camelpoxvirus (CMLV) were amplified by Polymerase Chain Reaction using gene specific primers, followed by cloning and sequencing using the standard experimental protocols. CMLV 163R protein is the orthologue of Vaccinia virus A46R protein possessing the VIPER (viral inhibitory peptide of TLR4) sequence (an 11 amino acid peptide-KYSFKLILAEY) at its α1 helix. The RGD motif necessary for mediating the immunomodulatory mechanism is present in the amino acid sequences of CMLV 201R protein. Sequence analysis of both 163R and 201R genes revealed that CMLV obtained from India shared 100% identity with CMLV-Iran and CMLV-Kazakhstan strains both at DNA and protein level. Based on the nucleotide and amino acid residue sequence identities and phylogenetic analyses of these genes, it is found that CMLV-India is forming a cluster with Kazakhstan and Iranian CMLV isolates.Not Availabl
    corecore