Pre- and syn-eruptive degassing and crystallisation processes of the 2010 and 2006 eruptions of Merapi volcano, Indonesia

The 2010 eruption of Merapi (VEI 4) was the volcano’s largest since 1872. In contrast to the prolonged and effusive dome-forming eruptions typical of Merapi’s recent activity, the 2010 eruption began explosively, before a new dome was rapidly emplaced. This new dome was subsequently destroyed by explosions, generating pyroclastic density currents (PDCs), predominantly consisting of dark coloured, dense blocks of basaltic andesite dome lava. A shift towards open-vent conditions in the later stages of the eruption culminated in multiple explosions and the generation of PDCs with conspicuous grey scoria and white pumice clasts resulting from sub-plinian convective column collapse. This paper presents geochemical data for melt inclusions and their clinopyroxene hosts extracted from dense dome lava, grey scoria and white pumice generated during the peak of the 2010 eruption. These are compared with clinopyroxene-hosted melt inclusions from scoriaceous dome fragments from the prolonged dome-forming 2006 eruption, to elucidate any relationship between pre-eruptive degassing and crystallisation processes and eruptive style. Secondary ion mass spectrometry analysis of volatiles (H2O, CO2) and light lithophile elements (Li, B, Be) is augmented by electron microprobe analysis of major elements and volatiles (Cl, S, F) in melt inclusions and groundmass glass. Geobarometric analysis shows that the clinopyroxene phenocrysts crystallised at depths of up to 20 km, with the greatest calculated depths associated with phenocrysts from the white pumice. Based on their volatile contents, melt inclusions have re-equilibrated during shallower storage and/or ascent, at depths of ~0.6–9.7 km, where the Merapi magma system is interpreted to be highly interconnected and not formed of discrete magma reservoirs. Melt inclusions enriched in Li show uniform “buffered” Cl concentrations, indicating the presence of an exsolved brine phase. Boron-enriched inclusions also support the presence of a brine phase, which helped to stabilise B in the melt. Calculations based on S concentrations in melt inclusions and groundmass glass require a degassing melt volume of 0.36 km3 in order to produce the mass of SO2 emitted during the 2010 eruption. This volume is approximately an order of magnitude higher than the erupted magma (DRE) volume. The transition between the contrasting eruptive styles in 2010 and 2006 is linked to changes in magmatic flux and changes in degassing style, with the explosive activity in 2010 driven by an influx of deep magma, which overwhelmed the shallower magma system and ascended rapidly, accompanied by closed-system degassing

Relocation of hypocenters from DOMERAPI and BMKG networks: a preliminary result from DOMERAPI project

International audienc

Overbank block-and-ash flow deposits and the impact of valley-derived, unconfined flows on populated areas at Merapi volcano, Java, Indonesia

Merapi, an andesitic volcanic complex in Central Java, is one of the most frequently erupting volcanoes in Indonesia and poses a permanent threat to the surrounding population of over 1 million people. With frequently recurring volcanic activity, the sixty or so reported eruptions since the mid-1500s have caused ~7,000 fatalities and destroyed numerous villages in the region. In June 2006, an eruption affected the densely populated area on the volcano’s southern and south-eastern flanks for the first time in almost a century. The resultant block-and-ash flows (BAFs) travelled down an incised river valley (Kali Gendol) to a distance of 7 km from the source, breaking out of the main channel at four main locations. Unconfined (overbank) BAFs were generated, which covered the interfluve regions on either side of the main valley and buried buildings and other infrastructure features in the village of Kaliadem, situated on the western bank of the Gendol valley ~5 km from the summit of Merapi. Using traditional volcanological field-based methods and non-invasive, high-resolution ground-penetrating radar techniques, the morphology and internal architecture of these overbank deposits were studied in detail in order to evaluate the destructive impact of these flows in a local context. The results show that complex, local-scale variations in flow dynamics and deposit architectures are apparent and that BAFs are capable of transporting significant numbers of large blocks (\u3e1–2 m) out of the valley confines. We propose a conceptual model for the escape of these channelised BAFs onto the interfluvial terrace at Kaliadem and show, through a stratigraphic analysis of the pyroclastic successions underlying the village and adjacent areas on the volcano’s southern flank, that the area has been affected repeatedly by overbank BAFs and explosive eruptions over the past few 100 years (and more)

The Geological Evolution of Merapi Volcano, Central Java, Indonesia

Merapi is an almost persistently active basalt to basaltic andesite volcanic complex in Central Java (Indonesia) and often referred to as the type volcano for small-volume pyroclastic flows generated by gravitational lava dome failures (Merapi-type nuées ardentes). Stratigraphic field data, published and new radiocarbon ages in conjunction with a new set of 40K–40Ar and 40Ar–39Ar ages, and whole-rock geochemical data allow a reassessment of the geological and geochemical evolution of the volcanic complex. An adapted version of the published geological map of Merapi [(Wirakusumah et al. 1989), Peta Geologi Gunungapi Merapi, Jawa Tengah (Geologic map of Merapi volcano, Central Java), 1:50,000] is presented, in which eight main volcano stratigraphic units are distinguished, linked to three main evolutionary stages of the volcanic complex—Proto-Merapi, Old Merapi and New Merapi. Construction of the Merapi volcanic complex began after 170 ka. The two earliest (Proto-Merapi) volcanic edifices, Gunung Bibi (109 ± 60 ka), a small basaltic andesite volcanic structure on Merapi’s north-east flank, and Gunung Turgo and Gunung Plawangan (138 ± 3 ka; 135 ± 3 ka), two basaltic hills in the southern sector of the volcano, predate the Merapi cone sensu stricto. Old Merapi started to grow at ~30 ka, building a stratovolcano of basaltic andesite lavas and intercalated pyroclastic rocks. This older Merapi edifice was destroyed by one or, possibly, several flank failures, the latest of which occurred after 4.8 ± 1.5 ka and marks the end of the Old Merapi stage. The construction of the recent Merapi cone (New Merapi) began afterwards. Mostly basaltic andesite pyroclastic and epiclastic deposits of both Old and New Merapi (14C years BP) cover the lower flanks of the edifice. A shift from medium-K to high-K character of the eruptive products occurred at ~1,900 14C years BP, with all younger products having high-K affinity. The radiocarbon record points towards an almost continuous activity of Merapi since this time, with periods of high eruption frequency interrupted by shorter intervals of apparently lower eruption rates, which is reflected in the geochemical composition of the eruptive products. The Holocene stratigraphic record reveals that fountain collapse pyroclastic flows are a common phenomenon at Merapi. The distribution and run-out distances of these flows have frequently exceeded those of the classic Merapi-type nuées ardentes of the recent activity. Widespread pumiceous fallout deposits testify the occurrence of moderate to large (subplinian) eruptions (VEI 3–4) during the mid to late Holocene. VEI 4 eruptions, as identified in the stratigraphic record, are an order of magnitude larger than any recorded historical eruption of Merapi, except for the 1872 AD and, possibly, the October–November 2010 events. Both types of eruptive and volcanic phenomena require careful consideration in long-term hazard assessment at Merapi

Textural history of recent basaltic-andesites and plutonic inclusions from Merapi volcano

Mt. Merapi in Central Java is one of the most active stratovolcanoes on Earth and is underlain by a multistage plumbing system. Crystal size distribution analyses (CSD) were carried out on recent Merapi basaltic-andesites and co-eruptive magmatic and plutonic inclusions to characterise the crystallisation processes that operate during storage and ascent and to obtain information on respective time scales. The basaltic-andesites exhibit log-linear, kinked-upwards CSD curves for plagioclase and clinopyroxene that can be separated into two main textural populations. Large plagioclase phenocrysts (≥1.6 mm) make up one population, but correspond to crystals with variable geochemical composition and reflect a period of crystal growth at deep to mid-crustal levels. This population was subsequently influenced by crystal accumulation and the onset of crustal assimilation, including the incorporation of high-Ca skarn-derived xenocrysts. Textural re-equilibration is required for these crystals to form a single population in CSD. A second episode of crystal growth at shallower levels is represented by chemically homogenous plagioclase crystals <1.6 mm in size. Crustal assimilation is indicated by, for example, oxygen isotopes and based on the CSD data, crystallisation combined with contamination is likely semi-continuous in these upper crustal storage chambers. The CSD data observed in the basaltic-andesite samples are remarkably consistent and require a large-volume steady state magmatic system beneath Merapi in which late textural equilibration plays a significant role. Plagioclase CSDs of co-eruptive magmatic and plutonic inclusions may contain a third crystal population (<1 mm) not found in the lavas. This third population has probably formed from enhanced degassing of portions of basaltic-andesite magma at shallow crustal levels which resulted in increased crystallinity and basaltic-andesite mush inclusions. A suite of coarse plutonic inclusions is also present that reflects crystallisation and accumulation of crystals in the deep Merapi plumbing system, as deduced from CSD patterns and mineral assemblages