11,232 research outputs found
Impacts on foam stabilised composite structures: experimental and numerical study
A dropweight tester is used to make low velocity tests on specific sandwich type structures. Sandwich are made of glass-epoxy skin and polyurethane foam core. The skins can be straight or little curved, and impact direction is the global skin direction. The aim of these tests is to study the initiation of rupture in such structures :local buckling of skin and foam core rupture. Experimental results are given. They show the evolution of buckling critical stress in the skin when impact velocity increases. The rupture mode in curved skin specimen is also studied : rupture is no more provoked by buckling. A numerical analysis is proposed to model the behaviour of the structure and the rupture initiation. Finally, a method is developed, in order to predict the propagation of skin debonding during impact : an element layer under the skin is damaged with a specific law to simulate debonding
Dynamic buckling of foam stabilised composite skin
Presented in the following pages is an experimental and numerical study of dynamic local buckling of skin on foam core. Impact tests on sandwich-type structures with skins stabilized by foam demonstrated that rupture appears by debonding of skins due to a local buckling phenomenon, and that the maximum stress in the skin, obtained at rupture, grows with the increase of the loading rate of the skin. A finite element analysis allows this phenomenon to be analyzed and understood, and a mass-spring-dashpot model is proposed to model the skin debonding initiation
Buckling of foam stabilised composite structures
An analytical modelling of the symmetrical wrinkling is proposed : from original assumptions on displacements within the core, and from an energy minimisation method, it is possible to predict critical loads and buckling modes better than traditional models do, and to distinguish the influence of each structure component. Compression tests were carried out on sandwich structures to validate the model. Little curved structures were also tested to estimate the influence of skin curvature on rupture and buckling mode. A finite elements analysis has been achieved in parallel : a fine modelling allows to find results close to experimental ones
Optimum graph cuts for pruning binary partition trees of polarimetric SAR images
This paper investigates several optimum graph-cut techniques for pruning binary partition trees (BPTs) and their usefulness for the low-level processing of polarimetric synthetic aperture radar (PolSAR) images. BPTs group pixels to form homogeneous regions, which are hierarchically structured by inclusion in a binary tree. They provide multiple resolutions of description and easy access to subsets of regions. Once constructed, BPTs can be used for a large number of applications. Many of these applications consist in populating the tree with a specific feature and in applying a graph cut called pruning to extract a partition of the space. In this paper, different pruning examples involving the optimization of a global criterion are discussed and analyzed in the context of PolSAR images for segmentation. Through the objective evaluation of the resulting partitions by means of precision-and-recall-for-boundaries curves, the best pruning technique is identified, and the influence of the tree construction on the performances is assessed.Peer ReviewedPostprint (author's final draft
Low velocity impact modeling in composite laminates capturing permanent indentation
This paper deals with impact damage and permanent indentation modeling. A numerical model has been elaborated in order to simulate the different impact damage types developing during low velocity/low energy impact. The three current damage types: matrix cracking, fiber failure and delamination, are simulated. Inter-laminar damage, i.e. interface delamination, is conventionally simulated using interface elements based on fracture mechanics. Intra-laminar damage, i.e. matrix cracks, is simulated using interface elements based on failure criterion. Fiber failure is simulated using degradation in the volume elements. The originality of this model is to simulate permanent indentation after impact with a ‘‘plastic-like’’model introduced in the matrix cracking elements. This model type is based on experimental observations showing matrix cracking debris which block crack closure. Lastly, experimental validation is performed, which demonstrates the model’s satisfactory relevance in simulating impact damage. This acceptable match between experiment and modeling confirms the interest of the novel approach proposed in this paper to describe the physics behind permanent indentation
Modelling of impact damage and permanent indentation on laminate composite plate
This paper deals with impact damage and permanent indentation modelling. A model enabling the formation of damages developing during a low velocity / low energy impact test on laminate composite panels has been elaborated. The different impact damages developing during an impact test, i.e. matrix cracking, fibres failure and interfaces delamination, are simulated. The interlaminar damages, i.e. interfaces delamination, are classically simulated thanks to interface finite elements based on the fracture mechanics. The particularity of this model is to account for the intralaminar damages, i.e. matrix cracks, thanks to interface finite elements which respect their discontinue character. These interface elements allow equally to simulate the permanent indentation during the impact unloading. This impact mark modelling is very original in the literature, and should allow to entirely design a composite structure thanks to impact damage tolerance
Weighted graphs defining facets: a connection between stable set and linear ordering polytopes
A graph is alpha-critical if its stability number increases whenever an edge
is removed from its edge set. The class of alpha-critical graphs has several
nice structural properties, most of them related to their defect which is the
number of vertices minus two times the stability number. In particular, a
remarkable result of Lov\'asz (1978) is the finite basis theorem for
alpha-critical graphs of a fixed defect. The class of alpha-critical graphs is
also of interest for at least two topics of polyhedral studies. First,
Chv\'atal (1975) shows that each alpha-critical graph induces a rank inequality
which is facet-defining for its stable set polytope. Investigating a weighted
generalization, Lipt\'ak and Lov\'asz (2000, 2001) introduce critical
facet-graphs (which again produce facet-defining inequalities for their stable
set polytopes) and they establish a finite basis theorem. Second, Koppen (1995)
describes a construction that delivers from any alpha-critical graph a
facet-defining inequality for the linear ordering polytope. Doignon, Fiorini
and Joret (2006) handle the weighted case and thus define facet-defining
graphs. Here we investigate relationships between the two weighted
generalizations of alpha-critical graphs. We show that facet-defining graphs
(for the linear ordering polytope) are obtainable from 1-critical facet-graphs
(linked with stable set polytopes). We then use this connection to derive
various results on facet-defining graphs, the most prominent one being derived
from Lipt\'ak and Lov\'asz's finite basis theorem for critical facet-graphs. At
the end of the paper we offer an alternative proof of Lov\'asz's finite basis
theorem for alpha-critical graphs
- …