16 research outputs found
Enhanced anticorrosion properties of nitrogen ions modified polyvinyl alcohol/Mg-Ag ions co-incorporated calcium phosphate coatings
Nitrogen ions (70 keV) were implanted on composite coatings containing polymer/Mg (magnesium)–Ag (silver) ions co-incorporated hydroxyapatite which is developed by microwave irradiation. Average crystallite size of modified coatings is reduced to 80% compared to pristine. The variation of bond strength of modified coatings is realized. The electrical resistance (77%), microhardness (4.3%), roughness (4.5 times) and pore size are enhanced on the modified coatings. Superhydrophilic surface is tuned to hydrophobic on implantation. At higher fluence (1×1017 ions/cm2) depicted an enhanced corrosion potential compared to the other coatings. Thus, the new insight of modified coatings is realized by correlating phase-structure, surface and anticorrosion
Surface stiffening and enhanced photoluminescence of ion implanted cellulose - polyvinyl alcohol - silica composite
Novel Cellulose (Cel) reinforced polyvinyl alcohol (PVA)-Silica (Si) composite which has good stability and in vitro degradation was prepared by lyophilization technique and implanted using N3+ ions of energy 24 keV in the fluences of 1 x 10(15), 5 x 10(15) and 1 x 10(16) ions/cm(2). SEM analysis revealed the formation of microstructures, and improved the surface roughness on ion implantation. In addition to these structural changes, the implantation significantly modified the luminescent, thermal and mechanical properties of the samples. The elastic modulus of the implanted samples has increased by about 50 times compared to the pristine which confirms that the stiffness of the sample surface has increased remarkably on ion implantation. The photoluminescence of the native cellulose has improved greatly due to defect site, dangling bonds and hydrogen passivation. Electric conductivity of the ion implanted samples was improved by about 25%. Hence, low energy ion implantation tunes the mechanical property, surface roughness and further induces the formation of nano structures. MG63 cells seeded onto the scaffolds reveals that with the increase in implantation fluence, the cell attachment, viability and proliferation have improved greatly compared to pristine. The enhancement of cell growth of about 59% was observed in the implanted samples compared to pristine. These properties will enable the scaffolds to be ideal for bone tissue engineering and imaging applications.G.M.S. acknowledges CSIR, India (Grant no: 09/468 (0474)/2013-EMR-I) and S.N.K. thanks the award of Erasmus-Mundus Svaagata for providing financial support to carry out this research. G.M.S., N.S. and S.N.K. acknowledge the support of UGC National facility for characterization facility. J.A.G.T. acknowledges the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project DPI2015-65401-C3-2-R (including the FEDER financial support). CIBER-BBN, Spain is an initiative funded by the VI National R&D Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. AFM was conducted by the microscopy service of the UPV, whose advice was greatly appreciated.Shanthini, GM.; Sakthivel, N.; Menon, R.; Nabhiraj, PY.; Gómez-Tejedor, JA.; Meseguer Dueñas, JM.; Gómez Ribelles, JL.... (2016). Surface stiffening and enhanced photoluminescence of ion implanted cellulose - polyvinyl alcohol - silica composite. Carbohydrate Polymers. 153:619-630. https://doi.org/10.1016/j.carbpol.2016.08.016S61963015
Mineralogical composition of urinary calculi from southern India
632-639Incidence of urinary calculi and its composition have been showing a remarkable global variation with profound changes in
living standards and dietary habits. Indian urinary stone composition is usually different from that of the western countries.
Urinary calculi in northern India were composed of pure calcium oxalate monohydrate (COM) and pure calcium oxalate
dihydrate (COD) and in Bihar were of mixed type. Urinary calculi from southern India was analyzed by X-Ray Diffraction
(XRD), Fourier Transform Infrared (FT-IR) spectroscopy, FT-Raman, Thermo Gravimetric Analyses (TGA) and Scanning
Electron Microscopy (SEM). Majority of the stones were pure or calcium phosphate mixed calcium oxalate stones. Uric acid
calculi and infection stone were less. SEM observation had shown regularly arranged platy COD crystals, orderly arranged
spherulitic hydroxyapatite (HAP) crystals in nucleus and COD bipyramidal crystals radiating from a central point. A
comprehensive clinical data of the patients is also provided
Various techniques to functionalize nanofibers with biological interest molecule
International audienc
Overview of Protein‐Based Biopolymers for Biomedical Application
International audienceBiopolymers are playing a vital role in biomedical applications. Among them, protein-based biopolymers are utilized for the fabrication of tissue-engineering constructs, therapeutic molecule delivery carriers, emulsifiers, and food packaging materials. Wide ranges of proteins are extracted from animal or plant sources and are being utilized for the fabrication of scaffolds for regenerative tissue-engineering application. Here, an overview about the protein structure, extraction procedure, solubility, and various formulation-based proteins found in the literature are discussed. Biopolymers display several advantages such as biocompatibility and degradability by enzymes. Methods to overcome the disadvantages of these proteins such as immunogenicity, antigenicity, and solubility are reported. Various crosslinking reagents specific to protein chemistry are discussed as well
Effect of solvent; enhancing the wettability and engineering the porous structure of a calcium phosphate/agarose composite for drug delivery
Tissue engineering deals with the regeneration of tissues for bone repair, wound healing, drug delivery, etc., and a highly porous 3D artificial scaffold is required to accommodate the cells and direct their growth. We prepared 3D porous calcium phosphate ((hydroxyapatite/beta-tricalcium phosphate)/agarose, (HAp/beta-TCP)/agarose) composite scaffolds by sol-gel technique with water (WBS) and ethanol (EBS) as solvents. The crystalline phases of HAp and beta-TCP in the scaffolds were confirmed by X-ray diffraction (XRD) analysis. The EBS had reduced crystallinity and crystallite size compared to WBS. WBS and EBS revealed interconnected pores of 1 mu m and 100 nm, respectively. The swelling ratio was higher for EBS in water and phosphate buffered saline (PBS). An in vitro drug loading/release experiment was carried out on the scaffolds using gentamicin sulphate (GS) and amoxicillin (AMX). We observed initial burst release followed by sustained release from WBS and EBS. In addition, GS showed more extended release than AMX from both the scaffolds. GS and AMX loaded scaffolds showed greater efficacy against Pseudomonas than Bacillus species. WBS exhibited enhanced mechanical properties, wettability, drug loading and haemocompatibility compared to EBS. In vitro cell studies showed that over the scaffolds, MC3T3 cells attached and proliferated and there was a significant increase in live MC3T3 cells. Both scaffolds supported MC3T3 proliferation and mineralization in the absence of osteogenic differentiation supplements in media which proves the scaffolds are osteoconducive. Microporous scaffolds (WBS) could assist the bone in-growth, whereas the presence of nanopores (EBS) could enhance the degradation process. Hence, WBS and EBS could be used as scaffolds for tissue engineering and drug delivery. This is a cost effective technique to produce scaffolds of degradable 3D ceramic-polymer composites
Design of Boron Nitride/Gelatin Electrospun Nanofibers for Bone Tissue Engineering
International audienceGelatin is a biodegradable biopolymer obtained by collagen denaturation, which shows poor mechanical properties. Hence, improving its mechanical properties is very essential towards the fabrication of efficient nontoxic material for biomedical applications. For this aim, various methods are employed using external fillers such as ceramics or bioglass. In this report, we introduce boron nitride (BN) reinforced gelatin as a new class of two dimensional biocompatible nanomaterials. The effect of the nanofiller on the mechanical behavior isanalyzed. BN is efficiently exfoliated using the biopolymer gelatin as shown through Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The exfoliated BN reinforces gelatin electrospun fibers, which results in an increase in the Young’s modulus. The ESM are stable after the glutaraldehyde cross-linking and the fibrous morphology is preserved. The cross-linked gelatin/BN ESM is highly bioactive in forming bone like hydroxyapatite as shown by scanning electron microscopy. Due to their enhanced mineralization ability, the cross-linked ESM have been tested on human bone cells (HOS osteosarcoma cell line). The cell attachment, proliferation and biocompatibility results show that the ESM are nontoxic and biodegradable. The analysis of osteoblast gene expression and the measurement of alkaline phosphatase activity confirm that these materials are suitable for bone tissue engineerin