Structural dichroism in the antiferromagnetic insulating phase of V_2O_3

We performed near-edge x-ray absorption spectroscopy (XANES) at V K edge in the antiferromagnetic insulating (AFI) phase of a 2.8% Cr-doped V_2O_3 single crystal. Linear dichroism of several percent is measured in the hexagonal plane and found to be in good agreement with ab-initio calculations based on multiple scattering theory. This experiment definitively proves the structural origin of the signal and therefore solves a controversy raised by previous interpretations of the same dichroism as non-reciprocal. It also calls for a further investigation of the role of the magnetoelectric annealing procedure in cooling to the AFI phase.Comment: 4 pages 3 figures. To be published in Phys. Rev. B (2005

The New Elderly Patient: A Necessary Upgrade

The elderly individual is becoming the most common patient in clinical practice due to the increasing average life span, especially in developed countries. The current elderly patients are different from those of some decades ago. They usually have an active social life, want to be informed, and are actively involved in the current society with consequent high expectations for medical and dental treatment. However, not all the elderly patients are like this. Some of them show limited financial resources, reduced mental and manual skills, and poor motivation. The purpose of this communication is to make a brief characterization of the new elderly population in view of prosthetic and dental management

Multiple-order reflections from monochromating crystals for the collection of X-ray absorption spectra at extremely high energies

A simple method to collect X-ray absorption spectra at extremely high energies (greater than or equal to 50 keV) is presented. The method is based on the use of the third harmonic signal from a conventional double-crystal monochromator. Strengths and limitations of the method are shown, together with a few experimental examples on metallic foils and oxide powders in transmission and fluorescence mode

High-Pressure Phase Diagram in the Manganites: a Two-site Model Study

The pressure dependence of the Curie temperature $T_C$ in manganites, recently studied over a wide pressure range, is not quantitatively accounted for by the quenching of Jahn-Teller distortions, and suggests the occurrence of a new pressure-activated localizing processes. We present a theoretical calculation of $T_C$ based on a two-site double-exchange model with electron-phonon coupling interaction and direct superexchange between the $t_{2g}$ core spins. We calculate the pressure dependence of $T_C$ and compare it with the experimental phase diagram. Our results describe the experimental behavior quite well if a pressure-activated enhancement of the antiferromagnetic superexchange interaction is assumed

Comment on a recent sensitivity analysis of radial base function and multi-layer feed-forward neural network models - Response

Contains fulltext : 112420.pdf (publisher's version ) (Open Access

Comparative analysis of the stability of prosthetic screws under cyclic loading in implant prosthodontics: An in vitro study

Background: To compare the loss of preload in absence of loading and after a fixed number of cyclic loadings on 7-mm distal cantilever in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400,000 repeated loadings were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400,000 cyclic loadings; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 min from the tightening in absence of cyclic loadings. Conclusions: Within the limits of the present study, MUA and OT-Bridge may be considered reliable prosthetic anchoring systems able to tolerate repeated cyclic occlusal loads on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening

EXAFS and XANES structural characterization of bimetallic AuPd vapor derived catalysts

Using an innovative procedure known as metal vapor synthesis (MVS) to prepare bimetallic catalysts, starting from Au and Pd vapors, [AuPd] co-evaporated and [Au][Pd] separately evaporated bimetallic catalysts were achieved. After being tested, the catalytic activity and selectivity of the [AuPd] catalyst turned out to be higher than the [Au][Pd] ones. Using EXAFS spectroscopy it was shown that, in the [AuPd] samples, small bimetallic AuPd nanoparticles were present, having an Au rich core surrounded by an AuPd alloyed shell while in the [Au][Pd] sample there was the presence of monometallic Au and Pd nanoparticles showing some alloying only in the boundary regions. The EXAFS results were also qualitatively conrmed by the XANES spectra

The structure of ZrO2 phases and devetrification processes in a Ca-Zr-Si-O-based glass ceramic: a combined a-XRD and XAS study

The structure of Zr atomic environment in a CaO-ZrO2-SiO2 glass-ceramic has beenstudied combining x-ray absorption spectroscopy (XAS), X-ray diffraction (XRD) andanomalous-XRD (a-XRD) techniques as a function of thermal treatments. The analysisof XRD patterns demonstrates that the devitrification process, as a function ofthermal treatment, proceeds through the partial segregation of Zr-depleted phases(Wollastonite-like) and Zr-rich phases (Zr-oxides). The XAS and a-XRD measurementsat the Zr K edge have been exploited to get a closer insight on the atomicstructure around Zr ions. In the as quenched glass the Zr is 6-fold coordinated to Oxygenatoms in an amorphous environment rich of Ca and Si. Thermal treatment firstly(T=1000 - 1050 oC) determines the partial segregation of Zr in form of oxide whichcrystalline structure is that of tetragonal Zirconia (t-ZrO2). Raising the temperature(T=1100 oC) provokes the formation of ZrO2 crystallites in the monoclinic crystallographicphase (Baddeleyite: m-ZrO2). The analysis of XAS data demonstrates that aconsiderable amount of Zr still remains in an amorphous Calcium-Silicate phase

Complete-arch accuracy of four intraoral scanners: An in vitro study

The purpose of this study is to define the accuracy of four intraoral scanners (IOS) through the analysis of digital impressions of a complete dental arch model. Eight metal inserts were placed on the model as reference points and then it was scanned with a laboratory scanner in order to obtain the reference model. Subsequently, the reference model was scanned with four IOS (Carestream 3600, CEREC Omnicam, True Definition Scanner, Trios 3Shape). Linear measurements were traced on an STL file between the chosen reference points and divided into four categories: three-element mesiodistal, five-element mesiodistal, diagonal, and contralateral measurements. The digital reference values for the measurements were then compared with the values obtained from the scans to analyze the accuracy of the IOS using ANOVA. There were no statistically significant differences between the measurements of the digital scans obtained with the four IOS systems for any of the measurement groups tested