Hybrid receiver study

The results are presented of a 4 month study to design a hybrid analog/digital receiver for outer planet mission probe communication links. The scope of this study includes functional design of the receiver; comparisons between analog and digital processing; hardware tradeoffs for key components including frequency generators, A/D converters, and digital processors; development and simulation of the processing algorithms for acquisition, tracking, and demodulation; and detailed design of the receiver in order to determine its size, weight, power, reliability, and radiation hardness. In addition, an evaluation was made of the receiver's capabilities to perform accurate measurement of signal strength and frequency for radio science missions

Development of on-line FTIR spectroscopy for siloxane detection in biogas to enhance carbon contactor management

Activated carbon filters are used to limit engine damage by siloxanes when biogas is utilised to provide electricity. However, carbon filter siloxane removal performance is poorly understood as until recently, it had not been possible to measure siloxanes on-line. In this study, on-line Fourier Transform Infrared (FTIR) spectroscopy was developed to measure siloxane concentration in real biogas both upstream (86.1–157.5 mg m−3) and downstream (2.2–4.3 mg m−3) of activated carbon filters. The FTIR provided reasonable precision upstream of the carbon vessel with a root mean square error of 10% using partial least squares analysis. However, positive interference from volatile organic carbons was observed in downstream gas measurements limiting precision at the outlet to an RMSE of 1.5 mg m−3 (47.8%). Importantly, a limit of detection of 3.2 mg m−3 was identified which is below the recommended siloxane limit and evidences the applicability of on-line FTIR for this application

Can we still call Australia home? The right to return and the legality of Australia’s COVID-19 travel restrictions

In the two years since Australia logged its first COVID-19 case and sealed its borders, thousands of citizens and permanent residents were locked out. Despite having a formal right to return, their ability to come home was hampered by a ‘one size fits all’ approach to hotel quarantine, travel caps linked to state/territory capacity, and a lack of federal facilities. This article examines the legality of Australia’s entry controls in light of international and domestic law. It documents the evolution of Australia’s response from the initial outbreak in China to the 2021 Delta outbreak in India, analysing the (limited) publicly available information as to the rationale for the restrictions. It examines the right to return in Australian domestic law, including whether citizens have a constitutionally protected right of entry. It also analyses the right to enter under international law, evaluating whether Australia’s settings constitute an arbitrary restriction of that right—especially since the drafters of the International Covenant on Civil and Political Rights thought it ‘inconceivable’ that a government would prevent citizens from returning for public health reasons

Research to improve the design of driven pile foundations in chalk: the ALPACA project

Large numbers of offshore wind turbines, near-shore bridges and port facilities are supported by driven piles. The design and installation of such piles is often problematic in Chalk, a low-density, porous, weak carbonate rock, which is present under large areas of NW Europe. There is little guidance available to designers on driveability, axial capacity, the lateral pile resistance which dominates offshore wind turbine monopile behaviour, or on how piles can sustain axial or lateral cyclic loading. This paper describes the ALPACA project which involves comprehensive field testing at a low-to-medium density chalk research test site. The project is developing new design guidance through comprehensive field testing and analysis combined with in-situ testing campaigns and advanced static-and-cyclic laboratory testing on high quality block and rotary core samples

Dissolved gas separation for engineered anaerobic wastewater systems

Dissolved gases produced within engineered anaerobic processes subsequently create a fugitive emission which can have financial, environmental and health and safety implications. Whilst desorption technology has been used to control dissolved gases in the drinking water sector, there is considerably less understanding of its deployment in wastewater for which there are numerous existing and emerging challenges. This review therefore focuses on existing and proposed technological approaches to gas desorption in engineered anaerobic wastewater processes, with specific emphasis on technology compatibility and downstream gas phase management. Simplified engineered solutions such as diffused aeration and multi-tray aerators appear robust solutions for implementation into wastewater. However, these processes are characterised by a low mass transfer coefficient and require high gas to liquid ratios (G/L) to achieve reasonable separation, which suggests their suitability is limited to small scale applications, in which gas recovery is not a priority. Packed columns and membrane contactors afford process intensification through increasing interfacial area which favours large scale applications; although both will require prefiltration technology to obviate media clogging. Vacuum or steam is the preferred driving force for separation when gas recovery is sought, while sweep-gas is energetically favoured. Sweep-gas has been used for gas recovery by operating at G/L toward the equilibrium value, which somewhat constrains mass transfer. Process selection must therefore be weighted on whole life cost, but will also be dependent upon process scale, financial (e.g. incentivisation) and non-financial (e.g. carbon) instruments, which are strongly influenced by regional policy

Sustainable degradation of carbon tetrafluoride to non-corrosive useful products by incorporating reduced electron mediator within electro-scrubbing

The degradation of CF4 gas using existing technologies produces other types of greenhouse gas (CO2) and corrosive side products. The main aim of this study is to degrade CF4 gas at room temperature into useful products without producing corrosive side products by mediated electrochemical reduction (MER) process using an electrogenerated Cu1+[Ni2+(CN)4]1− mediator. Initial studies on the electrolytic reduction of the hetero-bimetallic complex in catholyte solution at anodized Ti cathode was monitored by oxidation/reduction potential (ORP) variation whether the Cu2+ or Ni2+ was reduced in the Cu2+[Ni2+(CN)4] and confirmed by electron spin resonance (ESR) spectroscopy the Cu1+[Ni2+(CN)4]1− formation. The concentration variation of Cu1+[Ni2+(CN)4]1− during CF4 injection demonstrated the degradation of CF4 followed the MER by electrogenerated Cu1+[Ni2+(CN)4]1−. Maximum removal efficiency of CF4 using electroscrubbing process was 96% at room temperature. Through the variation in gas phase parameters, the gas phase mass transfer coefficient was calculated that can facilitate scale up the developed process. Fourier transform infrared spectroscopy analysis in both the gas and solution phases showed that CH3CH2OH was the main product that formed during the removal of CF4 by electrogenerated Cu1+[Ni2+(CN)4]1− at electroscrubber along with a small amount of CF3CH3 intermediate. Importantly, this mechanism also avoided formation of the corrosive product HF

Optimisation of impact pile driving using optical fibre Bragg grating measurements

This paper reports the use of optical Fibre Bragg Grating (FBG) sensors to monitor the stress waves generated below ground during pile driving, combined with measurements using conventional pile driving analyzer (PDA) sensors mounted at the pile head. Fourteen tubular steel piles with a diameter of 508 mm and embedded length to diameter ratios of 6 to 20 were impact driven at an established chalk test site in Kent, UK. The pile shafts were instrumented with multiple FBG strain gauges and pile head PDA sensors, which monitored the piles’ responses under each hammer blow. A high frequency (5kHz) fibre optic interrogator allowed a previously unseen resolution of the stress wave propagation along the pile. Estimates of the base soil resistances to driving and distributions of shaft shear resistances were found through signal matching that compared time series of pile head PDA measurements and FBG strains measured below ground surface. Numerical solutions of the onedimensional wave equation were optimised by taking account of the data from multiple FBG gauges, leading to significant advantages that have potential for widespread application in cases where high resolution strain measurements are made

Resting electrocardiographic and echocardiographic findings in an urban community in the Gambia

The presence of Left Ventricular Hypertrophy (LVH) in a patient with systemic hypertension deserves serious attention and makes its clinical diagnosis a priority. Over the years various criteriahave been proposed for the electrographic (ECG) diagnosis of LVH and the sensitivity and specificity of these criteria have been extensively studied in Caucasians. Recent evidence indicates that they areinapplicable to people of African descent. Unlike echocardiography (ECHO), the ECG is generally available, cheap but has a lower sensitivity in detecting LVH compared to echocardiography. Thisstudy was conducted to evaluate ECG criteria against 2-dimensional (2-D) guided M-mode echocardiography in the diagnosis of LVH in adult Gambians. Secondly, to determine the ECG criteria usingthe Minnesota, Araoye, Sokolow and Lyon or Wolff criteria with the overall best accuracy for the diagnosis of LVH. Two hundred and eight (208) consecutive patients with systemic hypertension (BP.140/90mmHg) with or without treatment and an age matched group of 108 non-hypertensive patients were enrolled from outpatient clinics. A questionnaire was filled. All patients were investigated with 2-D guided M-mode echocardiography and a standard 12-1ead ECG. Anthropometric measurements were also taken. The gold standard was the Penn formula to determine the left ventricular mass index (of 125 g/m2 in males and 110 g/m2 in females as the cut-off for LVH). Using this gold standard the prevalence of echocardiographic LVH was 47.5% and 27.8 % in the hypertensives and non-hypertensives respectively (P 0.05). Sokolow and Lyon criterion had overall best accuracy for the electrocardiographic diagnosis of left ventricular hypertrophyin hypertensives and is further recommended for use as such. But for non-hypertensives, the Wolff criterion had overall best accuracy

Design and chemical evaluation of reduced machine-yield cigarettes

AbstractExperimental cigarettes (ECs) were made by combining technological applications that individually reduce the machine measured yields of specific toxicants or groups of toxicants in mainstream smoke (MS). Two tobacco blends, featuring a tobacco substitute sheet or a tobacco blend treatment, were combined with filters containing an amine functionalised resin (CR20L) and/or a polymer-derived, high activity carbon adsorbent to generate three ECs with the potential for generating lower smoke toxicant yields than conventional cigarettes. MS yields of smoke constituents were determined under 4 different smoking machine conditions. Health Canada Intense (HCI) machine smoking conditions gave the highest MS yields for nicotine-free dry particulate matter and for most smoke constituents measured. Toxicant yields from the ECs were compared with those from two commercial comparator cigarettes, three scientific control cigarettes measured contemporaneously and with published data on 120 commercial cigarettes. The ECs were found to generate some of the lowest machine yields of toxicants from cigarettes for which published HCI smoke chemistry data are available; these comparisons therefore confirm that ECs with reduced MS machine toxicant yields compared to commercial cigarettes can be produced. The results encourage further work examining human exposure to toxicants from these cigarettes, including human biomarker studies