114 research outputs found
Recommended from our members
Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller
Mean and rms velocity characteristics of two Newtonian flows at Reynolds numbers of 12,800 (glycerin solution) and 48,000 (water) and of a non-Newtonian flow (0.2% CMC solution, at a power number similar to the Newtonian glycerin flow) in a mixing vessel stirred by a 60° pitched blade impeller have been measured by laser Doppler velocimetry (LDV). The velocity measurements, resolved over 360° and 1.08° of impeller rotation, showed that the mean flow of the two power number matched glycerin and CMC flows were similar to within 3% of the impeller tip velocity and the turbulence intensities generally lower in the CMC flow by up to 5% of the tip velocity. The calculated mean flow quantities showed similar discharge coefficient and pumping efficiency in all three flows and similar strain rate between the two power number matched glycerin and CMC flows; the strain rate of the higher Reynolds number Newtonian flow was found to be slightly higher. The energy balance around the impeller indicated that the CMC flow dissipated up to 9% more of the total input power and converted 7% less into the turbulence compared to the glycerin flow with the same power input which could lead to less effective mixing processes where the micro-mixing is important
Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids
To progress from the laboratory to commercial applications, it will be necessary to develop industrially scalable methods to produce large quantities of defect-free graphene. Here we show that high-shear mixing of graphite in suitable stabilizing liquids results in large-scale exfoliation to give dispersions of graphene nanosheets. X-ray photoelectron spectroscopy and Raman spectroscopy show the exfoliated flakes to be unoxidized and free of basal-plane defects. We have developed a simple model that shows exfoliation to occur once the local shear rate exceeds 10(4) s(-1). By fully characterizing the scaling behaviour of the graphene production rate, we show that exfoliation can be achieved in liquid volumes from hundreds of millilitres up to hundreds of litres and beyond. The graphene produced by this method performs well in applications from composites to conductive coatings. This method can be applied to exfoliate BN, MoS2 and a range of other layered crystals
Wavelet texture analysis of on-line acquired images for paper formation assessment and monitoring
http://www.sciencedirect.com/science/article/B6TFP-4TN82BP-2/2/0f2b38841a24101a06bac25004632e0
- …