The intervention of the emergency psychologist: The sipem sos emilia romagna during the first lockdown from covid-19. A retrospective study

Background and purpose of this work: WHO 11 March 2020 declares that Sars-Cov-2 infection is not only a health emergency but must be considered a pandemic. Covid-19 required the urgency of a new psychological intervention model to better address the crisis and ensure a direct support response to the people involved in the pandemic. The present study aimed to detect the symptoms and reactions of the population with respect to the event. The survey was carried out by describing the clinical symptoms that emerged from the triage card used by SIPEM SoS Emilia Romagna (Italy), connoting the criteria of emergency psychology. Methods: A retrospective quantitative study was conducted on 288 psychological triage cards. Results: only 11% of users who ask for support say they are positive while 85% report not having contracted the virus. Of the total, 40.9% call for psychological support in the management of anxiety symptoms, a need also reported by 55% of the subsample who declared previous psychological problems. In reaction to the pandemic event, 51.1% of the total refers to coping resources and availability for help. Discussions: the need for support of the population to manage symptoms highlights the need for early interventions, also to facilitate that slice of the population that does not have effective individual coping strategies and resources available to help. Conclusions: it can be deduced that interventions during these types of emergencies must be timely and aimed not only at those affected but also at the general population. (www.actabiomedica.it)

Cyclic mechanical loading promotes bacterial penetration along composite restoration marginal gaps

OBJECTIVES: Secondary caries is the most common reason for composite restoration replacement and usually forms between dentin and the filling. The objective of this study was to investigate the combined effect of cyclic loading and bacterial exposure on bacterial penetration into gaps at the interface between dentin and resin composite restorative material using a novel bioreactor system and test specimen design. METHODS: Human molars were machined into 3 mm thick disks with 2 mm deep x 5 mm diameter cavity preparations into which composite restorations were placed. A ~15-30 micrometer (small) or ~300 micrometer wide (large) dentin-restoration gap was introduced along half of the interface between the dentin and restoration. Streptococcus mutans UA 159 biofilms were grown on each sample prior to testing in a bioreactor both with and without cyclic loading. Both groups of samples were tested for 2 weeks and post-test biofilm viability was confirmed with a live-dead assay. Samples were fixed, mounted and cross-sectioned to reveal the gaps and observe the depth of bacterial penetration. RESULTS: It was shown that for large gap samples the bacteria easily penetrated to the full depth of the gap independent of loading or non-loading conditions. The results for all cyclically loaded small gap samples show a consistently deep bacterial penetration down 100% of the gap while the average penetration depth was only 67% for the non-loaded samples with only two of six samples reaching 100%. SIGNIFICANCE: A new bioreactor was developed that allows combining cyclic mechanical loading and bacterial exposure of restored teeth for bacterial biofilm and demineralization studies. Cyclic loading was shown to aid bacterial penetration into narrow marginal gaps, which could ultimately promote secondary caries formation.Keywords: Secondary caries, Cyclic loading, Marginal gap, Streptococcus mutans, Biofilm, Resin composit

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

Objective. The objective of this project, which was initiated from the Academy of Dental Materials, was to review and critically appraise methods to determine fracture, deformation and wear resistance of dental resin composites, in an attempt to provide guidance for investigators endeavoring to study these properties for these materials. Methods. Test methods have been ranked in the priority of the specific property being tested, as well as of the specific test methods for evaluating that property. Focus was placed on the tests that are considered to be of the highest priority in terms of being the most useful, applicable, supported by the literature, and which show a correlation with clinical findings. Others are mentioned briefly for the purpose of being inclusive. When a standard test method exists, including those used in other fields, these have been identified in the beginning of each section. Also, some examples from the resin composite literature are included for each test method. Results. The properties for evaluating resin composites were ranked in the priority of measurement as following: (1) Strength, Elastic Modulus, Fracture toughness, Fatigue, Indentation Hardness, Wear abrasion (third body) and Wear attrition (contact/two body), (2) Toughness, Edge strength (chipping) and (3) Wear determined by toothbrush. Significance. The following guidance is meant to aid the researcher in choosing the proper method to assess key properties of dental resin composites with regard to their fracture, deformation and wear resistance

Investigation on synthesis and properties of isosorbide based bis-GMA analogue

The aim of this work was to synthesize and investigate properties of a novel dimethacrylic monomer based on bioderived alicyclic diol—isosorbide. Its potential as a possible substitute of 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane (BISGMA), widely used in dental restorative materials and suspected for toxicity was assessed. The novel monomer was obtained in a three-step synthesis. First, isosorbide was etherified by a Williamson nucleophilic substitution and subsequently oxidized to isosorbide diglycidyl ether (ISDGE). A triphenyl phosphine catalyzed addition of methacrylic acid to ISDGE resulted in 2,5-bis(2-hydroxy-3-methacryloyloxypropoxy)- 1,4:3,6-dianhydro-sorbitol (ISDGMA). The monomer obtained was photopolymerized using camphorquinone/2-(dimethylamino)ethyl methacrylate initiating system. Next, compositions with triethylene glycol dimethacrylate (TEGDMA) were prepared and polymerized. Double bond conversion, polymerization shrinkage and water sorption of resulting polymers were determined. Selected mechanical (flexular strength and modulus, Brinell hardness) and thermomechanical (DMA analysis) properties were also investigated. BISGMA based materials were prepared as reference for comparison of particular properties

Dental sealant knowledge, opinion, values and practice of Spanish dentists

[Background] Multiple guidelines and systematic reviews recommend sealant use to reduce caries risk. Yet, multiple reports also indicate that sealants are significantly underutilized. This study examined the knowledge, opinions, values, and practice (KOVP) of dentists concerning sealant use in the southwest region of Andalusia, Spain. This is a prelude to the generation of a regional plan for improving children’s oral health in Andalusia.[Methods] The survey’s target population was dentists working in western Andalusia, equally distributed in the provinces of Seville, Cadiz, and Huelva (N=2,047). A convenience sample of meeting participants and meeting participant email lists (N=400) were solicited from the annual course on Community and Pediatric Dentistry. This course is required for all public health sector dentists, and is open to all private sector dentists. Information on the dentist’s KOVP of sealants was collected using four-part questionnaire with 31, 5-point Likert-scaled questions.[Results] The survey population demographics included 190 men (48%) and 206 women (52%) with an average clinical experience of 10.6 (± 8.4) years and 9.3 (± 7.5) years, respectively. A significant sex difference was observed in the distribution of place of work (urban/suburb) (p=0.001), but no sex differences between working sector (public/private). The mean ± SD values for each of the four KOVP sections for pit and fissure sealants were: knowledge = 3.57 ± 0.47; opinion = 2.48 ± 0.47; value = 2.74 ± 0.52; and practice = 3.48 ± 0.50. No sex differences were found in KOVP (all p >0.4). Independent of sex: knowledge statistically differed by years of experience and place of work; opinion statistically differed by years of experience and sector; and practice statistically differed by years of experience and sector. Less experienced dentists tended to have slightly higher scores (~0.25 on a Likert 1–5 scale). Statistically significant correlations were found between knowledge and practice (r=0.44, p=0.00) and between opinion and value (r=0.35, p=0.00).[Conclusions] The results suggest that, similar to other countries, Andalusian dentists know that sealants are effective, have neutral to positive attitudes toward sealants; though, based on epidemiological studies, underuse sealants. Therefore, methods other than classical behavior change (eg: financial or legal mechanisms) will be required to change practice patterns aimed at improving children's oral health.We acknowledge the following sources for invaluable financial support NIMHD 1 R34 DE022272 (NIH2385) and NIDCR 1 U24 MD006964

Review of nanomaterials in dentistry: interactions with the oral microenvironment, clinical applications, hazards, and benefits.

Interest in the use of engineered nanomaterials (ENMs) as either nanomedicines or dental materials/devices in clinical dentistry is growing. This review aims to detail the ultrafine structure, chemical composition, and reactivity of dental tissues in the context of interactions with ENMs, including the saliva, pellicle layer, and oral biofilm; then describes the applications of ENMs in dentistry in context with beneficial clinical outcomes versus potential risks. The flow rate and quality of saliva are likely to influence the behavior of ENMs in the oral cavity, but how the protein corona formed on the ENMs will alter bioavailability, or interact with the structure and proteins of the pellicle layer, as well as microbes in the biofilm, remains unclear. The tooth enamel is a dense crystalline structure that is likely to act as a barrier to ENM penetration, but underlying dentinal tubules are not. Consequently, ENMs may be used to strengthen dentine or regenerate pulp tissue. ENMs have dental applications as antibacterials for infection control, as nanofillers to improve the mechanical and bioactive properties of restoration materials, and as novel coatings on dental implants. Dentifrices and some related personal care products are already available for oral health applications. Overall, the clinical benefits generally outweigh the hazards of using ENMs in the oral cavity, and the latter should not prevent the responsible innovation of nanotechnology in dentistry. However, the clinical safety regulations for dental materials have not been specifically updated for ENMs, and some guidance on occupational health for practitioners is also needed. Knowledge gaps for future research include the formation of protein corona in the oral cavity, ENM diffusion through clinically relevant biofilms, and mechanistic investigations on how ENMs strengthen the tooth structure

Anti-proliferative effect of Rosmarinus officinalis L. extract on human melanoma A375 cells

Rosemary (Rosmarinus officinalis L.) has been used since ancient times in traditional medicine, while nowadays various rosemary formulations are increasingly exploited by alternative medicine to cure or prevent a wide range of health disorders. Rosemary's bioproperties have prompted scientific investigation, which allowed us to ascertain antioxidant, anti-inflammatory, cytostatic, and cytotoxic activities of crude extracts or of pure components. Although there is a growing body of experimental work, information about rosemary's anticancer properties, such as chemoprotective or anti-proliferative effects on cancer cells, is very poor, especially concerning the mechanism of action. Melanoma is a skin tumor whose diffusion is rapidly increasing in the world and whose malignancy is reinforced by its high resistance to cytotoxic agents; hence the availability of new cytotoxic drugs would be very helpful to improve melanoma prognosis. Here we report on the effect of a rosemary hydroalcoholic extract on the viability of the human melanoma A375 cell line. Main components of rosemary extract were identified by liquid chromatography coupled to tandem mass spectrometry (LC/ESI-MS/MS) and the effect of the crude extract or of pure components on the proliferation of cancer cells was tested by MTT and Trypan blue assays. The effect on cell cycle was investigated by using flow cytometry, and the alteration of the cellular redox state was evaluated by intracellular ROS levels and protein carbonylation analysis. Furthermore, in order to get information about the molecular mechanisms of cytotoxicity, a comparative proteomic investigation was performed

Cytotoxicity of three light-cured resin cements on 3T3 fibroblasts

Abstract Introduction Light-cured resin cements are the first choice for the cementation of laminate veneers. Ideally, they should be biocompatible and offer minimum risks to patients. Objective The aim of this study was to evaluate, in vitro, the cytotoxicity of three resin cements: Variolink II, Ivoclar Vivadent (C1), Allcem Veneer, FGM (C2), and Rely X Veneer, 3M ESPE (C3). Material and method Twenty four samples of each of the cements were fabricated in a standardized metal mold, light activated, and transferred to a 96-well cell plate with culture of fibroblasts. After 24, 48, and 72h of incubation, cytotoxicity was assessed and cell viability was calculated by the methyl-thiazol-tetrazolium (MTT) colorimetric assay. Absorbance was measured at 570 nm using a microplate spectrophotometer. Result The following results were found: Variolink II presented viability of 72.24% (SD 6.80) after 24h, 83.92% (SD 5.26) after 48h, and 92.77% (SD 5.59) after 72h; Allcem Veneer exhibited viability of 70.46% (SD 12.91) after 24h, 85.03% (SD 21.4) after 48h, and 70.46% (SD 12.91) after 72h; Rely X Veneer showed viability of 5.06% (SD 0.88) after 24h, 5.84% (SD 1.18) after 48h, and 6.99% (SD 1.34) after 72h. Conclusion Under these testing conditions, Rely X Veneer presented significantly higher cytotoxicity compared with those of the other light-cured resin cements assessed