Travelling-wave thermoacoustic electricity generator using an ultra-compliant alternator for utilization of low-grade thermal energy

This paper proposes a novel concept of a travelling-wave thermoacoustic electricity generator, which employs a looped-tube travelling-wave thermoacoustic engine to convert thermal energy into acoustic power, an ultra-compliant alternator within the engine loop to extract and convert the engine acoustic power to electricity and an acoustic stub matching technique to match the alternator to the engine. In addition, a carefully designed cold heat exchanger acts as a phase shifting inertance to improve the performance. A simple model has been developed to capture and demonstrate the physics of this new concept, while the whole system has been investigated in detail numerically by using a specialized design tool DeltaEC. Based on the current concept, a prototype has been designed, constructed and tested. It uses atmospheric air as the working fluid, a commercially available audio loudspeaker as the electro-dynamic transducer, and inexpensive standard parts as the acoustic resonator. The experimental results have verified the simplified model and the numerical simulations of the practical build. The small-scale inexpensive prototype generator produced 11.6 W of electrical power, which shows the potential for developing cheap thermoacoustic electricity generators for energy recovery from waste heat sources. It is concluded that such concept could be very attractive provided that inexpensive ultra-compliant alternators based on the standard technology used in audio loudspeakers could be developed. Finally, some guidelines have been discussed and proposed for developing such alternators

Local Control of Reactive Power by Distributed Photovoltaic Generators

High penetration levels of distributed photovoltaic (PV) generation on an electrical distribution circuit may severely degrade power quality due to voltage sags and swells caused by rapidly varying PV generation during cloud transients coupled with the slow response of existing utility compensation and regulation equipment. Although not permitted under current standards for interconnection of distributed generation, fast-reacting, VAR-capable PV inverters may provide the necessary reactive power injection or consumption to maintain voltage regulation under difficult transient conditions. As side benefit, the control of reactive power injection at each PV inverter provides an opportunity and a new tool for distribution utilities to optimize the performance of distribution circuits, e.g. by minimizing thermal losses. We suggest a local control scheme that dispatches reactive power from each PV inverter based on local instantaneous measurements of the real and reactive components of the consumed power and the real power generated by the PVs. Using one adjustable parameter per circuit, we balance the requirements on power quality and desire to minimize thermal losses. Numerical analysis of two exemplary systems, with comparable total PV generation albeit a different spatial distribution, show how to adjust the optimization parameter depending on the goal. Overall, this local scheme shows excellent performance; it's capable of guaranteeing acceptable power quality and achieving significant saving in thermal losses in various situations even when the renewable generation in excess of the circuit own load, i.e. feeding power back to the higher-level system.Comment: 6 pages, 5 figures, submitted to IEEE SmartGridComm 201

A low-cost electricity generator for rural areas using a travelling-wave looped-tube thermoacoustic engine

This article describes the construction and preliminary testing of a pre-prototype thermoacoustic electricity generator to test the concept of a low-cost device for application in remote or rural areas of developing countries. A travelling-wave thermoacoustic engine with a configuration of a looped-tube resonator is designed and constructed to convert heat to acoustic power. Air at atmospheric pressure is used as the working gas, PVC tubing is utilized for the feedback pipe, whereas an inexpensive commercially available loudspeaker is adopted to convert the acoustic power, produced by the engine, to electricity. Preliminary experimental results are presented and discussed in detail. The results show that the approach is feasible in principle and it is possible to produce the electrical power levels in the order of 4-5 W with overall heat-to-electric efficiencies in the order of 1 per cent. Further work towards optimizing the device from the performance, manufacturing, and cost points of view is outlined

The eclipsing post-common envelope binary CSS21055: a white dwarf with a probable brown-dwarf companion

We report photometric observations of the eclipsing close binary CSS21055 (SDSS J141126+200911) that strongly suggest that the companion to the carbon-oxygen white dwarf is a brown dwarf with a mass between 0.030 and 0.074 Msun. The measured orbital period is 121.73min and the totality of the eclipse lasts 125s. If confirmed, CSS21055 would be the first detached eclipsing WD+BD binary. Spectroscopy in the eclipse could provide information about the companion's evolutionary state and atmospheric structure.Comment: 6 pages, 5 figure

Stationary Josephson effect in a weak-link between nonunitary triplet superconductors

A stationary Josephson effect in a weak-link between misorientated nonunitary triplet superconductors is investigated theoretically. The non-self-consistent quasiclassical Eilenberger equation for this system has been solved analytically. As an application of this analytical calculation, the current-phase diagrams are plotted for the junction between two nonunitary bipolar $f-$wave superconducting banks. A spontaneous current parallel to the interface between superconductors has been observed. Also, the effect of misorientation between crystals on the Josephson and spontaneous currents is studied. Such experimental investigations of the current-phase diagrams can be used to test the pairing symmetry in the above-mentioned superconductors.Comment: 6 pages and 6 figure

Acceptance and commitment therapy as an adjunct to the MOVE! programme: a randomized controlled trial.

ObjectiveThe current study tested the efficacy of an acceptance and commitment therapy (ACT) group intervention for disinhibited eating behaviour as an adjunct to the Veterans Affairs MOVE!© weight management programme.MethodsVeterans (N = 88) with overweight or obesity who completed the MOVE! weight management programme and self-identified as having problems with 'stress-related eating' were randomized to four 2-h weekly ACT sessions or a continued behavioural weight-loss (BWL) intervention. Assessments were completed at baseline, post-treatment and 3- and 6-month follow-up on outcomes of interest including measures of disinhibited eating patterns, obesity-related quality of life, weight-related experiential avoidance and weight.ResultsThe BWL group exhibited significantly greater reductions in binge eating behaviour at post-treatment compared with the ACT group. Significant improvements in other outcomes were found with minimal differences between groups. In both groups, decreases in weight-related experiential avoidance were related to improvements in binge eating behaviour.ConclusionsTaken together, the continued BWL intervention resulted in larger improvements in binge eating behaviour than the ACT intervention. The two groups showed similar improvements in other disinhibited eating outcomes. Future studies are encouraged to determine if more integrated or longer duration of ACT treatment may maximize eating outcomes in MOVE.Trial Registration Number: This trial was registered with ClinicalTrials.gov database (NCT01757847)