111,055 research outputs found
Historical overview of V/STOL aircraft technology
The requirements for satisfactory characteristics in several key technology areas are discussed and a review is made of various V/STOL aircraft for the purpose of assessing the success or failure of each design in meeting design requirements. Special operating techniques were developed to help circumvent deficiencies. For the most part performance and handling qualities limitations restricted operational evaluations. Flight operations emphasized the need for good STOL performance, good handling qualities, and stability and control augmentation. The majority of aircraft suffered adverse ground effects
Scanning mirror for infrared sensors
A high resolution, long life angle-encoded scanning mirror, built for application in an infrared attitude sensor, is described. The mirror uses a Moire' fringe type optical encoder and unique torsion bar suspension together with a magnetic drive to meet stringent operational and environmental requirements at a minimum weight and with minimum power consumption. Details of the specifications, design, and construction are presented with an analysis of the mirror suspension that allows accurate prediction of performance. The emphasis is on mechanical design considerations, and brief discussions are included on the encoder and magnetic drive to provide a complete view of the mirror system and its capabilities
V/STOL aircraft and fluid dynamics
The impact of military applications on rotorcraft and V/STOL aircraft design is summarized with respect to fixed-wing aircraft. The influence of the mission needs on the configurational design of V/STOL aircraft, the implications regarding some problems in fluid dynamics relating to propulsive flows, and their interaction with the aircraft and the ground plane, are also considered. Additional research in fluid dynamics that can contribute to an improvement in performance of V/STOL aircraft is suggested
Efficiency analysis of reaction rate calculation methods using analytical models I: The 2D sharp barrier
We analyze the efficiency of different methods for the calculation of
reaction rates in the case of two simple analytical benchmark systems. Two
classes of methods are considered: the first are based on the free energy
calculation along a reaction coordinate and the calculation of the transmission
coefficient, the second on the sampling of dynamical pathways. We give scaling
rules for how this efficiency depends on barrier height and width, and we hand
out simple optimization rules for the method-specific parameters. We show that
the path sampling methods, using the transition interface sampling technique,
become exceedingly more efficient than the others when the reaction coordinate
is not the optimal one.Comment: 22 pages, 5 figure
Online Gaming Can Make a Better World: Jane McGonigal
With personal feelings put aside and sociological theoretical depictions brought to the forefront, it is interesting to compare some of Jane\u27s ideas with that of both Emile Durkheim and Max Weber. The theorist who stood out right away, being exemplified through Jane\u27s positive attitude claims on a much larger, macro-level scale, was Emile Durkheim. Jane\u27s ideas about transcending human\u27s as a resource through the social fabrics of gaming into something that might solve world hunger, poverty, and global warming was nothing short of functionalism at it\u27s best. Jane\u27s platform for social structure and maintaining positive social order is the online world, and online gaming is the vehicle for change
Influence of design variables on radiation hardness of silicon MINP solar cells
Metal-insulator-N/P silicon (MINP) solar cells were fabricated using different substrate resistivity values, different N-layer designs, and different I-layer designs. A shallow junction into an 0.3 ohm-cm substrate gave best efficiency whereas a deeper junction into a 1 to 4 ohm-cm substrate gave improved radiation hardness. I-layer design variation did little to influence radiation hardness
Adsorption of O2, SO2, and SO3 on nickel oxide. Mechanism for sulfate formation
Calculations based on the atom superposition and electron delocalization molecular orbital (ASED-MO) technique suggest that O2 will adsorb perferentially end-on at an angle 45 deg from normal on a nickel cation site on the (100) surface of NiO. SO2 adsorption is also stronger on the nickel site; SO2 bonds through the sulfur atom is a plane perpendicular to the surface. Adsorption energies for SO3 on the nickel and oxygen sites are comparable in the perferred orientation in which the SO3 plane is parallel to the surface. On activation, SO3 adsorbed to an O2(-) site forms a trigonal pyramidal SO4 species which yields, with a low barrier, a tetrahedral sulfate anion. Subsequently the anion reorients on the surface. Possibilities for alternative mechanisms which require the formation of Ni3(+) or O2(-) are discussed. NiSO4 thus formed leads to the corrosion of Ni at high temperatures in the SO2+O2/SO3 The SO2+O2/SO3 atmosphere, as discussed in the experimental literature
I-V-T analysis of radiation damage in high efficiency Si solar cells
A detailed analysis of current-voltage characteristics of N(+)-P/P solar cells indicate that there is a combination of different mechanisms which results in an enhancement in the dark current and in turn deteriorates the photovoltaic performance of the solar cells after 1 MeV e(-) irradiation. The increase in the dark current is due to three effects, i.e., bulk recombination, space charge recombination by deep traps and space charge recombination through shallow traps. It is shown that the increase in bulk recombination current is about 2 to 3 orders of magnitude whereas space charge recombination current due to shallow traps increases only by an order or so and no space charge recombination through deep traps was observed after irradiation. Thus, in order to improve the radiation hardness of these devices, bulk properties should be preserved
V/STOL maneuverability and control
Maneuverability and control of V/STOL aircraft in powered-lift flight is studied with specific considerations of maneuvering in forward flight. A review of maneuverability for representative operational mission tasks is presented and covers takeoff, transition, hover, and landing flight phases. Maneuverability is described in terms of the ability to rotate and translate the aircraft and is specified in terms of angular and translational accelerations imposed on the aircraft. Characteristics of representative configurations are reviewed, including experience from past programs and expectations for future designs. The review of control covers the characteristics inherent in the basic airframe and propulsion system and the behavior associated with ontrol augmentation systems. Demands for augmented stability and control response to meet certain mission operational requirements are discussed. Experience from ground-based simulation and flight experiments that illustrates the impact of augmented stability and control on aircraft design is related by example
- …