13 research outputs found
The PS 10 MHz High Level RF System Upgrade
In view of the upgrade of the injectors for the High Luminosity LHC, significantly higher bunch intensity is required for LHC-type beams. In this context an upgrade of the main accelerating RF system of the Proton Synchrotron (PS) is necessary, aiming at reducing the cavity impedance which is the source of longitudinal coupled-bunch oscillations. These instabilities pose as a major limitation for the increase of the beam intensity as planned after LS2. The 10 MHz RF system consists in 11 ferrite loaded cavities, driven by tube-based power amplifiers for reasons of radiation hardness. The cavity-amplifier system is equipped with a wide-band feedback that reduces the beam induced voltage. A further reduction of the beam loading is foreseen by upgrading the feedback system, which can be reasonably achieved by increasing the loop gain of the existing amplification chain. This paper describes the progress of the design of the upgraded feedback system and shows the results of the tests on the new amplifier prototype, installed in the PS during the 2015-16 technical stop. It also reports the first results of its performance with beam, observed in the beginning of the 2016 run
Design of the new wideband RF system for the CERN PS Booster
For the renovation and upgrade of the CERN PS Booster (PSB) RF systems a development project was launched in 2012. The design, based on a new approach, aimed at replacing the existing tuned, narrowband RF systems with wideband, modular, solid-state driven units. A wide range of issues had to be addressed spanning from RF power production, radiation hardness of solid-state devices, active cancellation of beam-induced voltages, dedicated low-level electronics allowing multi-harmonic operation and beam stability. Following a three-year prototyping and testing campaign and two international reviews, the project endorsement came at the end of year 2015. It foresees the complete removal of present h1, h2 and h10 systems and the deployment of a new one covering all the frequency ranges from 1 MHz to 18 MHz. The four PSB rings will be equipped with 144 identical acceleration cells providing 24 kV total RF voltage per ring. This paper describes the design concepts, the retained solutions, the expected performances and includes the procurement and implementation strategies. This activity is part of the LHC Injectors Upgrade project (LIU)
The MU-RAY detector for muon radiography of volcanoes
International audienceThe MU-RAY detector has been designed to perform muon radiography of volcanoes. The possible use on the field introduces several constraints. First the electric power consumption must be reduced to the minimum, so that the detector can be solar-powered. Moreover it must be robust and transportable, for what concerns the front-end electronics and data acquisition. A 1 m2 prototype has been constructed and is taking data at Mt. Vesuvius. The detector consists of modules of 32 scintillator bars with wave length shifting fibers and silicon photomultiplier read-out. A dedicated front-end electronics has been developed, based on the SPIROC ASIC. An introduction to muon radiography principles, the MU-RAY detector description and results obtained in laboratory will be presented
The MU-RAY project: detector technology and first data from Mt. Vesuvius
Muon Radiography allows to map the density of a volcanic cone. It is based on the
measurement of the attenuation of the flux of muons present in the cosmic radiation on the ground.
The MU-RAY project has developed an innovative detector designed for the muon radiography.
The main features are the low electric power consumption, robustness and transportability, good
spatial resolution and muon time of flight measurement. A 1 m2 detector prototype has been
constructed. and collected data at Mt. Vesuvius for approximately 1 month in spring 2013. A
second campaign of measurement has been performed at the Puy de Dˆome, France, in the last four
months of 2013. In this article the principles of muon radiography, the MU-RAY detector and the
first results from the collected data will be described
The MU-RAY project: detector technology and first data from Mt. Vesuvius
Muon Radiography allows to map the density of a volcanic cone. It is based on the
measurement of the attenuation of the flux of muons present in the cosmic radiation on the ground.
The MU-RAY project has developed an innovative detector designed for the muon radiography.
The main features are the low electric power consumption, robustness and transportability, good
spatial resolution and muon time of flight measurement. A 1 m2 detector prototype has been
constructed. and collected data at Mt. Vesuvius for approximately 1 month in spring 2013. A
second campaign of measurement has been performed at the Puy de Dˆome, France, in the last four
months of 2013. In this article the principles of muon radiography, the MU-RAY detector and the
first results from the collected data will be described.PublishedC020291V. Storia e struttura dei sistemi vulcaniciJCR Journalrestricte
EXPADES: a new detection system for charged particles in experiments with RIBs
A new detection apparatus, named EXPADES (EXotic PArticle DEtection System), has been expressly designed to be used in nuclear physics experiments involving exotic beams and devoted to the study of nuclear reactions (scattering, direct reactions, breakup ...) at energies around the Coulomb barrier. It consists of double-side segmented silicon detectors arranged in a compact configuration around the target. A very large solid angle, a wide angular range, high granularity and a highly miniaturized readout electronics, based on a new production commercial ASIC chipset, are the main features of the system
EXPADES: A new detection system for charged particles in experiments with RIBs
A new detection apparatus, named EXPADES (EXotic PArticle DEtection System), has been expressly designed to be used in nuclear
physics experiments involving exotic beams and devoted to the study of nuclear reactions (scattering, direct reactions, breakup. . .) at
energies around the Coulomb barrier. It consists of double-side segmented silicon detectors arranged in a compact configuration around
the target. A very large solid angle, a wide angular range, high granularity and a highly miniaturized readout electronics, based on a new
production commercial ASIC chipset, are the main features of the system
The MU-RAY detector for muon radiography of volcanoes
The MU-RAY detector has been designed to perform muon radiography of volcanoes. The possible use on the field introduces several constraints. First the electric power consumption must be reduced to the
minimum, so that the detector can be solar-powered. Moreover it must be robust and transportable, for what concerns the front-end electronics and data acquisition. A 1m2 prototype has been constructed and
is taking data at Mt.Vesuvius. The detector consists of modules of 32 scintillator bars with wavelength shifting fibers and silicon photomultiplier read-out. A dedicated front-end electronics has been developed, based on the SPIROC ASIC. An introduction to muon radiography principles, the MU-RAY
detector description and results obtained in laboratory will be presented