Multiple charge beam dynamics in Alternate Phase Focusing structure

Asymmetrical Alternate Phase (A-APF) focusing realized in a sequence of 36 Superconducting Quarter Wave Resonators has been shown to accelerate almost 81 % of input Uranium beam before foil stripper to an energy of 6.2 MeV/u from 1.3 MeV/u. Ten charge states from 34+ to 43+ could be simultaneously accelerated with the phase of resonators tuned for 34+. A-APF structure showed unique nature of large potential bucket for charge states higher than that of tuned one. Steering inherent to QWRs can be mitigated by selecting appropriate phase variation of the APF periods and optimization of solenoid field strengths placed in each of the periods. This mitigation facilitates multiple charge state acceleration schemeComment: 10 pages, 8 figure

Amine-terminated nanoparticle films: pattern deposition by a simple nanostencilling technique and stability studies under X-ray irradiation

Exploring the surface chemistry of nanopatterned amine-terminated nanoparticle films.</p

The first operation and results of the Chung-Li VHF radar

The Chung-Li Very High Frequency (VHF) radar is used in the dual-mode operations, applying Doppler beam-swinging as well as the spaced-antenna-drift method. The design of the VHF radar is examined. Results of performance tests are discussed

Comparative performance of squeeze film air journal bearings made of aluminium and copper

This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. Copyright @ 2012 The Authors - The article can be accessed from the links below.This article has been made available through the Brunel Open Access Publishing Fund.Two tubular squeeze film journal bearings, made from Al 2024 T3 and Cu C101, were excited by driving the single-layer piezoelectric actuators at a 75-V AC with a 75-V DC offset. The input excitation frequencies were coincident with the 13th modal frequency, at 16.32 and 12.18 kHz for the respective Al and Cu bearings, in order to produce a ‘triangular’ modal shape. The paper also provided a CFX model, used to solve the Reynolds equation and the equation of motion, to explain the squeeze film effect of an oscillating plate with pressure end leakage. The dynamic characteristics of both bearings were studied in ANSYS and then validated by experiments with respect to their squeeze film thickness and load-carrying capacity. It was observed that whilst both bearings did levitate a load when excited at mode 13, the Al bearing showed a better floating performance than Cu bearing. This is due to the fact that the Al bearing had a higher modal frequency and a greater amplitude response than the Cu bearing.This article is made available through the Brunel Open Access Publishing Fund

On the Influence of Stochastic Moments in the Solution of the Neutron Point Kinetics Equation

On the Influence of Stochastic Moments in the Solution of the Neutron Point Kinetics EquationComment: 12 pages, 2 figure

On the Evolution of Ion Bunch Profile in the Presence of Longitudinal Coherent Electron Cooling

In the presence of longitudinal coherent electron cooling, the evolution of the line-density profile of a circulating ion bunch can be described by the 1-D Fokker-Planck equation. We show that, in the absence of diffusion, the 1-D equation can be solved analytically for certain dependence of cooling force on the synchrotron amplitude. For more general cases with arbitrary diffusion, we solved the 1-D Fokker-Planck equation numerically and the numerical solutions have been compared with results from macro-particle tracking