Superposition method for analysis of free-edge stresses

Superposition techniques were used to transform the edge stress problem for composite laminates into a more lucid form. By eliminating loads and stresses not contributing to interlaminar stresses, the essential aspects of the edge stress problem are easily recognized. Transformed problem statements were developed for both mechanical and thermal loads. Also, a technique for approximate analysis using a two dimensional plane strain analysis was developed. Conventional quasi-three dimensional analysis was used to evaluate the accuracy of the transformed problems and the approximate two dimensional analysis. The transformed problems were shown to be exactly equivalent to the original problems. The approximate two dimensional analysis was found to predict the interlaminar normal and shear stresses reasonably well

AIGO: a southern hemisphere detector for the worldwide array of ground-based interferometric gravitational wave detectors

This paper describes the proposed AIGO detector for the worldwide array of interferometric gravitational wave detectors. The first part of the paper summarizes the benefits that AIGO provides to the worldwide array of detectors. The second part gives a technical description of the detector, which will follow closely the Advanced LIGO design. Possible technical variations in the design are discussed

Geometrically nonlinear analysis of adhesively bonded joints

A geometrically nonlinear finite element analysis of cohesive failure in typical joints is presented. Cracked-lap-shear joints were chosen for analysis. Results obtained from linear and nonlinear analysis show that nonlinear effects, due to large rotations, significantly affect the calculated mode 1, crack opening, and mode 2, inplane shear, strain-energy-release rates. The ratio of the mode 1 to mode 2 strain-energy-relase rates (G1/G2) was found to be strongly affected by he adhesive modulus and the adherend thickness. The ratios between 0.2 and 0.8 can be obtained by varying adherend thickness and using either a single or double cracked-lap-shear specimen configuration. Debond growth rate data, together with the analysis, indicate that mode 1 strain-energy-release rate governs debond growth. Results from the present analysis agree well with experimentally measured joint opening displacements

Far infrared maps of the ridge between OMC-1 and OMC-2

Dust continuum emission from a 6 ft x 20 ft region surrounding OMC-1 and OMC-2 were mapped at 55 and 125 microns with 4 ft resolution. The dominant features of the maps are a strong peak at OMC-1 and a ridge of lower surface brightness between OMC-1 and OMC-2. Along the ridge the infrared flux densities and the color temperature decreases smoothly from OMC-1 to OMC-2. OMC-1 is heated primarily by several optical and infrared stars situated within or just at the boundary of the cloud. At the region of minimum column density between OMC-1 and OMC-2 the nearby B0.5 V star NU Ori may contribute significantly to the dust heating. Near OMC-2 dust column densities are large enough so that, in addition to the OMC-2 infrared cluster, the nonlocal infrared sources associated with OMC-1 and NU Ori can contribute to the heating

Plans for the LIGO–TAMA joint search for gravitational wave bursts

We describe the plans for a joint search for unmodelled gravitational wave bursts being carried out by the LIGO and TAMA Collaborations using data collected during February–April 2003. We take a conservative approach to detection, requiring candidate gravitational wave bursts to be seen in coincidence by all four interferometers. We focus on some of the complications of performing this coincidence analysis, in particular the effects of the different alignments and noise spectra of the interferometers

A new look at numerical analyses of free-edge stresses in composite laminates

The edge stress problem for a + or - 45 deg graphite/epoxy laminate was examined. The reliability of the displacement formulated finite element method in analyzing the edge stress problem was investigated. Analyses of two well known elasticity problems, one involving a stress discontinuity and one a singularity, showed that the finite element analysis yields accurate stress distributions everywhere except in two elements closest to the stress discontinuity of singularity. Stress distributions for a + or - 45 deg laminate showed the same behavior near the singularity found in the well known problems with exact solutions. The displacement formulated finite element method appears to be a highly accurate technique for calculating interlaminar stress in composite laminates. The disagreement among the numerical methods was attributed to the unsymmetric stress tensor at the singularity

Far infrared and submillimeter brightness temperatures of the giant planets

The brightness temperatures of Jupiter, Saturn, Uranus, and Neptune in the range 35 to 1000 micron. The effective temperatures derived from the measurements, supplemented by shorter wavelength Voyager data for Jupiter and Saturn, are 126.8 + or - 4.5 K, 93.4 + or - 3.3 K, 58.3 + or - 2.0 K, and 60.3 + or - 2.0 K, respectively. The implications of the measurements for bolometric output and for atmospheric structure and composition are discussed. The temperature spectrum of Jupiter shows a strong peak at approx. 350 microns followed by a deep valley at approx. 450 to 500 microns. Spectra derived from model atmospheres qualitatively reproduced these features but do not fit the data closely

Arm cavity resonant sideband control for laser interferometric gravitational wave detectors

We present a new optical control scheme for a laser interferometric gravitational wave detector that has a high degree of tolerance to interferometer spatial distortions and noise on the input light. The scheme involves resonating the rf sidebands in an interferometer arm cavity

An all-optical trap for a gram-scale mirror

We report on a stable optical trap suitable for a macroscopic mirror, wherein the dynamics of the mirror are fully dominated by radiation pressure. The technique employs two frequency-offset laser fields to simultaneously create a stiff optical restoring force and a viscous optical damping force. We show how these forces may be used to optically trap a free mass without introducing thermal noise; and we demonstrate the technique experimentally with a 1 gram mirror. The observed optical spring has an inferred Young's modulus of 1.2 TPa, 20% stiffer than diamond. The trap is intrinsically cold and reaches an effective temperature of 0.8 K, limited by technical noise in our apparatus.Comment: Major revision. Replacement is version that appears in Phy. Rev. Lett. 98, 150802 (2007