Numerical Simulation of Porosity in Cements

The pores in cementitious materials, their sizes and connectivity have an important influence on the durability of concrete. Several microstructural models have been developed to simulate the three-dimensional pore network in cement pastes. In this article, microstructures with the \upmu μ ic model are compared with experimental results. It is seen that despite having a resolution for the capillary pores very close to reality, the experimentally observed breakthrough diameter from mercury intrusion is much lower than the values obtained by applying an algorithm of mercury intrusion to the simulated microstructure. The effect of some of the most important input parameters on the pore sizes in the simulated microstructure explored. The phenomenon which seems best able to explain this discrepancy is that C-S-H is not in fact a phase with a smooth surface as represented in microstructural models, but a phase which grows as needles into the pore space, leading to very small water-filled capillary pores from quite young ages. The results demonstrate it will be extremely challenging to represent the porosity of real microstructures in microstructural models on the scale of hundreds of microns necessary to study macroscopic transpor

Revealing design complexity: Lessons from the Open University

Design is an inherently complex activity. Design thinking is cognitively complex and design practice is contextually complex. This has implications for university-level design education which has traditionally displayed clear distinctions between the full-time and part-time undergraduate sectors, particularly in their teaching and learning strategies. However, a number of pressures and trends are evident which suggest that these two sectors are moving closer together. One of the drivers in this phenomenon is the need for students to be exposed to realistic levels of design complexity. This paper examines complexity in design and draws some significant parallels between modern design practice in general and the production of a new undergraduate course at the Open University. Both are used to illuminate design complexity. The paper suggests that some of the tools, techniques and approaches of part-time, undergraduate, distance design education might usefully be exploited in more traditional, full-time course models

Impacto del uso de un cemento de bajo carbono en la mejora de la sostenibilidad de la producción de cemento

A preliminary assessment of conditions for the industrial manufacture of a new cementitious system based on clinker-calcined clay and limestone, developed by the authors, referred as “low carbon cement” is presented. The new cement enables the substitution of more than 50% of the mass of clinker without compromising performance. The paper presents the follow-up of an industrial trial carried out in Cuba to produce 130 tonnes of the new cement at a cement plant. The new material proved to fulfill national standards in applications such as the manufacture of hollow concrete blocks and precast concrete. No major differences either in the rheological or mechanical properties were found when compared with Portland cement. Environmental assessment of the ternary cement was made, which included comparison with other blended cements produced industrially in Cuba. The new cement has proven to contribute to the reduction of above 30% of carbon emissions on cement manufacture.Se presenta la evaluación preliminar de las condiciones de fabricación industrial de un nuevo sistema cementicio a partir del empleo de clínquer; arcillas calcinadas y piedra caliza; desarrollado por los autores; denominado “cemento de bajo carbono”. El nuevo cemento posibilita la reducción de más de un 50% de la masa de clínquer; sin comprometer el comportamiento del material. El presente trabajo presenta el monitoreo de la producción industrial en una planta en Cuba; de 130 t del nuevo cemento. El cemento obtenido cumple con las regulaciones nacionales de calidad y su empleo tiene similar rendimiento que el cemento Pórtland para la producción de bloques y hormigón de 25 MPa. Se realiza el análisis de impacto ambiental del cemento ternario mediante la comparación con otros cementos producidos industrialmente. El nuevo cemento puede contribuir a la reducción de más del 30% de las emisiones de CO2 asociadas a la manufactura de cemento

Numerical Simulation of Porosity in Cements

The pores in cementitious materials, their sizes and connectivity have an important influence on the durability of concrete. Several microstructural models have been developed to simulate the three-dimensional pore network in cement pastes. In this article, microstructures with the ic model are compared with experimental results. It is seen that despite having a resolution for the capillary pores very close to reality, the experimentally observed breakthrough diameter from mercury intrusion is much lower than the values obtained by applying an algorithm of mercury intrusion to the simulated microstructure. The effect of some of the most important input parameters on the pore sizes in the simulated microstructure explored. The phenomenon which seems best able to explain this discrepancy is that C-S-H is not in fact a phase with a smooth surface as represented in microstructural models, but a phase which grows as needles into the pore space, leading to very small water-filled capillary pores from quite young ages. The results demonstrate it will be extremely challenging to represent the porosity of real microstructures in microstructural models on the scale of hundreds of microns necessary to study macroscopic transport

Accelerating Community College Graduation Rates: A Benefit–Cost Analysis

This article reports a benefit–cost evaluation of the Accelerated Study in Associate Programs (ASAP) of the City University of New York (CUNY). ASAP was designed to accelerate associate degree completion within 3 years of degree enrollment at CUNY’s community colleges. The program evaluation revealed that the completion rate for the examined cohort increased from 24.1% to 54.9%, and cost per graduate declined considerably (Levin & Garcia, 2012; Linderman & Kolenovic, 2012). The returns on investment to the taxpayer include the benefits from higher tax revenues and lower costs of spending on public health, criminal justice, and public assistance. For each dollar of investment in ASAP by taxpayers, the return was $3 to$4. For each additional graduate, the taxpayer gained an amount equal to a certificate of deposit with a value of $146,000 (net of the costs of the investment). Based on these estimated returns, a cohort of 1,000 students enrolled in ASAP would generate net fiscal benefits for the taxpayer of more than$46 million relative to enrolling in the conventional degree program. ASAP results demonstrate that an effective educational policy can generate returns to the taxpayer that vastly exceed the public investment required

Frequent use of paracetamol and risk of allergic disease among women in an Ethiopian population

Introduction The hypothesis that paracetamol might increase the risk of asthma and other allergic diseases have gained support from a range of independent studies. However, in studies based in developed countries, the possibility that paracetamol and asthma are associated through aspirin avoidance is difficult to exclude. Objectives To explore this hypothesis among women in a developing country, where we have previously reported aspirin avoidance to be rare. Methods In 2005/6 a population based cohort of 1065 pregnant women was established in Butajira, Ethiopia and baseline demographic data collected. At 3 years post birth, an interview-based questionnaire administered to 945 (94%) of these women collected data on asthma, eczema, and hay fever in the past 12 month, frequency of paracetamol use and potential confounders. Allergen skin tests to Dermatophagoides pteronyssinus and cockroach were also performed. The independent effects of paracetamol use on allergic outcomes were determined using multiple logistic regression analysis. Findings The prevalence of asthma, eczema and hay fever was 1.7%, 0.9% and 3.8% respectively; of any one of these conditions 5.5%, and of allergen sensitization 7.8%. Paracetamol use in the past month was reported by 29%, and associations of borderline significance were seen for eczema (adjusted OR (95% CI) = 8.51 (1.68 to 43.19) for 1–3 tablets and 2.19 (0.36 to 13.38) for ≥4 tablets, compared to no tablets in the past month; overall p = 0.055) and for ‘any allergic condition’ (adjusted OR (95% CI) = 2.73 (1.22 to 6.11) for 1–3 tablets and 1.35 (0.67 to 2.70) for ≥4 tablets compared to 0 in the past month; overall p = 0.071). Conclusions This study provides further cross-sectional evidence that paracetamol use increases the risk of allergic disease

The use of design activity for research into Computer Supported Co-operative Working (CSCW)

This paper describes current research at Loughborough University in the field of Computer Supported Co-operative Working (CSCW). The project, which is funded by the Information Engineering Directorate (IED) within the Science and Engineering Research Council (SERC), is titled 'Establishing the Communicational Requirements of Information Technology (IT) Systems that Support Humans Co-operating Remotely'. The research group have adopted a less cumbersome acronym for the project - ROCOCO which is derived from REmote COoperation and COmmunication. Design activity has been proposed as offering a suitable context for a study of co-operation and at the time of writing the first phase of the experiments - involving face to face or proximal co-operation - has been undertaken and the analysis begun. The ROCOCO project is about to embark on phase two involving remote co-operation. This paper presents, in some detail, the construction and operation of a pilot study that allowed project members to assess and adjust the experimental design prior to the start of Phase One. A selection of initial findings illustrate the nature of the investigation to be undertaken. The paper also seeks to highlight the importance of CSCW research for the design community. The substance of the paper is concerned with a presentation of issues involved in an analysis of co-operation, involving as it does, verbal and non-verbal communication

Tunable dispersion compensating grating in a 10Gbit/s 100-220km step index fibre link

Chirped fibre gratings are of particular interest for compensating the dispersion (~17ps/nm.km @ 1.55µm) of installed step index (SI) fibre links since they are compact, low-loss, polarisation-insensitive and offer high negative-dispersion. In this paper we present a detailed investigation of the bandwidth-dispersion trade-off for a fixed (40mm) length tunable linearly-chirped fibre grating. In addition we demonstrate that such a grating can precisely compensate the dispersion in a 10Gbit/s transmission experiment for SI fibre lengths in the range 103-216km

Cognitive behaviour therapy versus counselling intervention for anxiety in young people with high-functioning autism spectrum disorders: a pilot randomised controlled trial

The use of cognitive-behavioural therapy (CBT) as a treatment for children and adolescents with autism spectrum disorder (ASD) has been explored in a number of trials. Whilst CBT appears superior to no treatment or treatment as usual, few studies have assessed CBT against a control group receiving an alternative therapy. Our randomised controlled trial compared use of CBT against person-centred counselling for anxiety in 36 young people with ASD, ages 12–18. Outcome measures included parent- teacher- and self-reports of anxiety and social disability. Whilst each therapy produced improvements inparticipants, neither therapy was superior to the other to a significant degree on any measure. This is consistent with findings for adults

Domestic chicken diversity: Origin, distribution, and adaptation

Chicken is the most numerous among the domesticated livestock species. Across cultures, religions, and societies, chicken is widely accepted with little or no taboo compared to other domestic animals. Its adaptability to diverse environmental conditions and demonstrated potential for breeding improvement provide a unique genetic resource for addressing the challenges of food security in a world impacted by climatic change and human population growth. Recent studies, shedding new knowledge on the chicken genomes, have helped reconstruct its past evolutionary history. Here, we review the literature concerning the origin, dispersion, and adaptation of domestic chicken. We highlight the role of human and natural selection in shaping the diversity of the species and provide a few examples of knowledge gaps that may be the focus of future research