Application of reverse micelle sol-gel synthesis for bulk doping and heteroatoms Surface Enrichment in Mo-Doped TiO 2 nanoparticles

TiO 2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol-gel method allowing the dispersion of Mo atoms in the TiO 2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N 2 adsorption/desorption isotherms at -196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV-Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoO x species occurring only at a higher Mo content

Binder free and flexible asymmetric supercapacitor exploiting Mn3O4 and MoS2 nanoflakes on carbon fibers

Emerging technologies, such as portable electronics, have had a huge impact on societal norms, such as access to real time information. To perform these tasks, portable electronic devices need more and more accessories for the processing and dispensation of the data, resulting in higher demand for energy and power. To overcome this problem, a low cost high-performing flexible fiber shaped asymmetric supercapacitor was fabricated, exploiting 3D-spinel manganese oxide Mn3O4 as cathode and 2D molybdenum disulfide MoS2 as anode. These asymmetric supercapacitors with stretched operating voltage window of 1.8 V exhibit high specific capacitance and energy density, good rate capability and cyclic stability after 3000 cycles, with a capacitance retention of more than 80%. This device has also shown an excellent bending stability at different bending conditions

Reverse Micelle Strategy for the Synthesis of MnOx-TiO2Active Catalysts for NH3-Selective Catalytic Reduction of NOxat Both Low Temperature and Low Mn Content

MnOx-TiO2catalysts (0, 1, 5, and 10 wt % Mn nominal content) for NH3-SCR (selective catalytic reduction) of NOxhave been synthesized by the reverse micelle-assisted sol-gel procedure, with the aim of improving the dispersion of the active phase, usually poor when obtained by other synthesis methods (e.g., impregnation) and thereby lowering its amount. For comparison, a sample at nominal 10 wt % Mn was obtained by impregnation of the (undoped) TiO2sample. The catalysts were characterized by using an integrated multitechnique approach, encompassing X-ray diffraction followed by Rietveld refinement, micro-Raman spectroscopy, N2isotherm measurement at −196 °C, energy-dispersive X-ray analysis, diffuse reflectance UV-vis spectroscopy, temperature-programmed reduction technique, and X-ray photoelectron spectroscopy. The obtained results prove that the reverse micelle sol-gel approach allowed for enhancing the catalytic activity, in that the catalysts were active in a broad temperature range at a substantially low Mn loading, as compared to the impregnated catalyst. Particularly, the 5 wt % Mn catalyst showed the best NH3-SCR activity in terms of both NOxconversion (ca. 90%) and the amount of produced N2O (ca. 50 ppm) in the 200-250 °C temperature range

Modelling Galaxies with a Multi-Phase ISM in 3d

We present a modified TREESPH code to model galaxies in 3d. The model includes a multi-phase description of the interstellar medium which combines two numerical techniques. A diffuse warm/hot gas phase is modelled by SPH while a sticky particle scheme is used to represent a cloudy medium. Interaction processes, such as star formation and feedback, cooling and mixing by condensation and evaporation, are taken into account. Here we apply our model to the evolution of a Milky Way type galaxy. After an initial stage, a quasi-equilibrium state is reached. It is characterised by a star formation rate of ~1 M_sun/year. Condensation and evaporation rates are in balance at 0.1-1 M_sun/year.Comment: 6 pages, 7 figures, Refereed contribution to the 5th Galactic Chemodynamics conference held in Swinburne, July 2003. Accepted for publication in PAS

Electrical Properties of Meso-Porous Silicon: from a surface effect to Coulomb Blockade and more

Abstract: since the Volker Lehmann's paper "Resistivity of Porous Silicon: a surface effect" published in 1995 [1], a great deal of efforts has been produced in understanding the basic mechanisms ruling the electron transport in Si mesostructures and how these phenomena are affected by external environment. After more than 10 years, new experimental evidences and physical insights have been obtained, like gas sensitivity [2], chemisorption phenomena [3], Coulomb blockade [4] and glassy dynamics In the first half of the '90s, the most studied porous silicon morphology was from high resistivity p-type wafers, because of the high luminescence efficiency. The Lehmann's paper on electrical properties of porous silicon from p+ doped wafers, addressed few unanswered crucial questions regarding resistivity, impurity role, carrier freeze out and surface conditioning proposing a microscopic model of transport in mesoPS, in analogy to submicron channels of CMOS devices, whose figures of telegraph noise are affected by single charge trapping at the oxide-semiconductor interface. In 1999, the first report of strong interaction between mesoporous p+ silicon was announced in Strasbourg, EMRS by our group The successive years were so devoted to a fundamental study of mesoporous silicon in interaction with gas, by means of IR spectroscopy, ESR, NMR and ab-initio calculations Since the former paper of 1999 other groups contributed to study the phenomenon of NO 2 interaction with detailed papers on IR spectroscopy and Drude effect due to free carriers restored by nitrogen dioxid

A feature-based morphing methodology for in-vivo strain assessment in biological structures

It is often important, for diagnostic purposes, to evaluate quantitatively the motion undergone by a biological structure, starting from a viable tomographic imaging technique, such as Computed Tomography (CT) or Magnetic Resonance (MR). This is often associated with the need of the clinical personnel to perform an evaluation of a risk factor associated with pathology, e.g. ventricle performance [1]. As of today, the problem has been approached by using the magnetic resonance (MR) tagging technique [2] or experimentally by determining the location of a series of surgically implanted markers in each temporal phase [3]. The latter procedure is naturally very invasive, while MR tagging requires the use of sophisticated MR sequences that are rarely employed in standard care. Multi-detector row computer tomography (CT) scanners (routinely used in cardiac pathology diagnosis) as well as routine cine-MR sequences, on the other hand, allow dynamic imaging of the heart and large vessels with cardiac gating. In order to exploit these dynamic sequences, we have developed a tag-less method to estimate local strains from dynamic tomography gated images.</jats:p