Quitting the Boss? The Role of Manager Influence Tactics and Employee Emotional Engagement in Voluntary Turnover

Employees commonly cite their managers’ behavior as the primary reason for quitting their jobs. We sought to extend turnover research by investigating whether two commonly used influence tactics by managers affect their employees’ voluntary turnover and whether employees’ emotional engagement and job satisfaction mediate this relationship. We tested our hypotheses using survey data collected at two time points from a sample of financial services directors and objective lagged turnover data. Using multilevel path modeling, we found that managers’ use of pressure and inspirational appeals had opposite effects on employee voluntary turnover and that employees’ emotional engagement was a significant and unique mediating mechanism even when job satisfaction, the traditional attitudinal predictor of turnover, was also included in the path model. Our findings contribute to turnover research by demonstrating a relationship between specific managerial behaviors and employee turnover and shed light on a key mediating mechanism that explains these effects

CHIMP: A SIMPLE POPULATION MODEL FOR USE IN INTEGRATED ASSESSMENT OF GLOBAL ENVIRONMENTAL CHANGE

We present the Canberra-Hamburg Integrated Model for Population (CHIMP), a new global population model for long-term projections. Distinguishing features of this model, compared to other model for secular population projections, are that (a) mortality, fertility, and migration are partly driven by per capita income; (b) large parts of the model have been estimated rather than calibrated; and (c) the model is in the public domain. Scenario experiments show similarities but also differences with other models. Similarities include rapid aging of the population and an eventual reversal of global population growth. The main difference is that CHIMP projects substantially higher populations, particularly in Africa, primarily because our data indicate a slower fertility decline than assumed elsewhere. Model runs show a strong interaction between population growth and economic growth, and a weak feedback of climate change on population growth.population model, long term projections, global change, integrated assessment

Efficacy of using a dual layer of membrane (d PTFE placed over collagen) for ridge preservation in fresh extraction sites: a micro‐computed tomographic study in dogs

Objective To assess if overbuilding the buccal plate or using a dual‐layer socket grafting technique prevents alveolar bone resorption and enhances final ridge width, height, and volume after tooth loss in an animal model. Material and methods In eight beagle dogs bilateral second (P2)‐, third (P3)‐, and fourth (P4) premolars were endodontically treated. All bilateral mandibular first premolars and distal roots of P2, P3, and P4 were hemisectioned and atraumatically extracted. Animals were randomly divided into four groups: (i) Control–Socket alone, (ii) Particulate allograft in the alveolum, socket covered with high‐density polytetrafluoroethylene ( dPTFE ) membrane and sutured over the alveolum, (iii) Particulate allograft in the alveolum and overbuilding the buccal plate, socket covered with dPTFE membrane and sutured over the alveolum, (iv) Particulate allograft in the alveolum and covered with dual layer ( dPTFE placed over collagen membrane), and sutured over the alveolum. After 16 weeks, the animals were sacrificed. Mandibular blocks of the jaws were assessed for bone volume ( BV ), vertical bone height ( VBH ), alveolar ridge thickness, and bone mineral density ( BMD ) using micro‐computed tomography. Results The BV in groups 1, 2, 3, and 4 was 169.5, 207.57, 242.4, and 306.1 mm 3 , respectively. The VBH in groups 1, 2, 3, and 4 was 4.2, 6.4, 6.2, and 7.3 mm, respectively. Ridge widths in groups 1, 2, 3, and 4 were 5.45 ± 0.75, 5.91 ± 0.86, 6.05 ± 0.63, and 6.28 ± 1.01 mm, respectively. There was no significant difference in BMD between the groups. Conclusions The RP using a dual layer of membrane following tooth extraction results in more BV , VBH , and alveolar ridge width as compared to when a single layer of membrane is used.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/100133/1/clr2526.pd

The Chlamydomonas genome project: A decade on

The green alga Chlamydomonas reinhardtii is a popular unicellular organism for studying photosynthesis, cilia biogenesis, and micronutrient homeostasis. Ten years since its genome project was initiated an iterative process of improvements to the genome and gene predictions has propelled this organism to the forefront of the omics era. Housed at Phytozome, the plant genomics portal of the Joint Genome Institute (JGI), the most up-to-date genomic data include a genome arranged on chromosomes and high-quality gene models with alternative splice forms supported by an abundance of whole transcriptome sequencing (RNA-Seq) data. We present here the past, present, and future of Chlamydomonas genomics. Specifically, we detail progress on genome assembly and gene model refinement, discuss resources for gene annotations, functional predictions, and locus ID mapping between versions and, importantly, outline a standardized framework for naming genes

Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites : a comprehensive analysis of machining-induced damage responses

This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray μCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples.Peer reviewe

Analysis of Yield Attributing Characters of Different Genotypes of Wheat in Rupandehi, Nepal

Field experiment was conducted at National Wheat Research Program, Bhairahawa, Rupandehi with the objective to identify high yielding superior wheat genotypes for Rupandehi district of Nepalduring 2014. Experiment was laid out in one factorial Randomized completely block design with ten wheat genotypes including both released and promising; Annapurna 1, Annapurna 3, Pasang Lahmu, Bijaya, BL 3623, Bhirkuti, NL 297, BL 4316, BL 3978 and BL 4347with three replications. The results showed that the grain yield of BL 3978 was found higher (4.03 t ha-1) than other genotypes followed by BL 4347 (3.93t ha-1). BL 3978 have also higher number of effective tillers m-2 and test weight. Among release varieties, NL 297 show higher yield (4 t ha-1) followed by Bhirkuti (3.43 t ha-1)and Bijaya (3.37 t ha-1). From this experiment it can be concluded that BL 3978 was found promising among all genotypes however should be tested at on-farms before promoted for general cultivation in Rupandehi district of Nepal

Binder free 2D aligned efficient MnO2 micro flowers as stable electrodes for symmetric supercapacitor applications

δ-MnO2 thin film electrodes (M1) deposited on stainless steel mesh using CBD were used in symmetric supercapacitor device (SSM/M1//M1/SSM) with aqueous 1 M Na2SO4 electrolyte. The device shows 138% retention of specific capacitance after 2500 cycles.</p

Incomplete inhibition of phosphorylation of 4E-BP1 as a mechanism of primary resistance to ATP-competitive mTOR inhibitors

The mammalian target of rapamycin (mTOR) regulates cell growth by integrating nutrient and growth factor signaling and is strongly implicated in cancer. But mTOR is not an oncogene, and which tumors will be resistant or sensitive to new ATP-competitive mTOR inhibitors now in clinical trials remains unknown. We screened a panel of over 600 human cancer cell lines to identify markers of resistance and sensitivity to the mTOR inhibitor PP242. RAS and PIK3CA mutations were the most significant genetic markers for resistance and sensitivity to PP242, respectively; colon origin was the most significant marker for resistance based on tissue type. Among colon cancer cell lines, those with KRAS mutations were most resistant to PP242, while those without KRAS mutations most sensitive. Surprisingly, cell lines with co-mutation of PIK3CA and KRAS had intermediate sensitivity. Immunoblot analysis of the signaling targets downstream of mTOR revealed that the degree of cellular growth inhibition induced by PP242 was correlated with inhibition of phosphorylation of the translational repressor 4E-BP1, but not ribosomal protein S6. In a tumor growth inhibition trial of PP242 in patient-derived colon cancer xenografts, resistance to PP242 induced inhibition of 4E-BP1 phosphorylation and xenograft growth was again observed in KRAS mutant tumors without PIK3CA co-mutation, compared to KRAS WT controls. We show that, in the absence of PIK3CA co-mutation, KRAS mutations are associated with resistance to PP242 and that this is specifically linked to changes in the level of phosphorylation of 4E-BP1

The Gemini Planet Imager Exoplanet Survey: Giant Planet and Brown Dwarf Demographics From 10-100 AU

We present a statistical analysis of the first 300 stars observed by the Gemini Planet Imager Exoplanet Survey (GPIES). This subsample includes six detected planets and three brown dwarfs; from these detections and our contrast curves we infer the underlying distributions of substellar companions with respect to their mass, semi-major axis, and host stellar mass. We uncover a strong correlation between planet occurrence rate and host star mass, with stars M $>$ 1.5 $M_\odot$ more likely to host planets with masses between 2-13 M$_{\rm Jup}$ and semi-major axes of 3-100 au at 99.92% confidence. We fit a double power-law model in planet mass (m) and semi-major axis (a) for planet populations around high-mass stars (M $>$ 1.5M$_\odot$) of the form $\frac{d^2 N}{dm da} \propto m^\alpha a^\beta$, finding $\alpha$ = -2.4 $\pm$ 0.8 and $\beta$ = -2.0 $\pm$ 0.5, and an integrated occurrence rate of $9^{+5}_{-4}$% between 5-13 M$_{\rm Jup}$ and 10-100 au. A significantly lower occurrence rate is obtained for brown dwarfs around all stars, with 0.8$^{+0.8}_{-0.5}$% of stars hosting a brown dwarf companion between 13-80 M$_{\rm Jup}$ and 10-100 au. Brown dwarfs also appear to be distributed differently in mass and semi-major axis compared to giant planets; whereas giant planets follow a bottom-heavy mass distribution and favor smaller semi-major axes, brown dwarfs exhibit just the opposite behaviors. Comparing to studies of short-period giant planets from the RV method, our results are consistent with a peak in occurrence of giant planets between ~1-10 au. We discuss how these trends, including the preference of giant planets for high-mass host stars, point to formation of giant planets by core/pebble accretion, and formation of brown dwarfs by gravitational instability.Comment: 52 pages, 18 figures. AJ in pres