Combining economic and social goals in the design of production systems by using ergonomics standards

In designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational work environments. This paper gives an overview of the 174 international ISO and European CEN standards in this field, and discusses their applicability in design processes. The available standards include general recommendations for integrating ergonomics into the design process, as well as specific requirements for manual handling, mental load, task design, human-computer-interaction, noise, heat, body measurements, and other topics. The standards can be used in different phases of the design process: allocation of system functions between humans and machines, design of the work organization, work tasks and jobs, design of work environment, design of work equipment, hardware and software, and design of workspace and workstation. The paper is meant to inform engineers and managers involved in the design of production systems about the existence of a large number of ISO and CEN standards on ergonomics, which can be used to optimize human well-being and overall system performance.review;standard;standardization;ergonomics;CEN;ISO;human factors;production engineering;production planning

Three Dimensional Printing of Multiscale Carbon Fiber-Reinforced Polymer Composites Containing Graphene or Carbon Nanotubes

Three-dimensional printing offers a promising, challenging opportunity to manufacture component parts with ad hoc designed composite materials. In this study, the novelty of the research is the production of multiscale composites by means of a solvent-free process based on melt compounding of acrylonitrile–butadiene–styrene (ABS), with various amounts of microfillers, i.e., milled (M) carbon fibers (CFs) and nanofillers, i.e., carbon nanotubes (CNTs) or graphene nanoplatelets (GNPs). The compounded materials were processed into compression molded sheets and into extruded filaments. The latter were then used to print fused filament fabrication (FFF) specimens. The multiscale addition of the microfillers inside the ABS matrix caused a notable increase in rigidity and a slight increase in strength. However, it also brought about a significant reduction of the strain at break. Importantly, GNPs addition had a good impact on the rigidity of the materials, whereas CNTs favored/improved the composites’ electrical conductivity. In particular, the addition of this nanofiller was very effective in improving the electrical conductivity compared to pure ABS and micro composites, even with the lowest CNT content. However, the filament extrusion and FFF process led to the creation of voids within the structure, causing a significant loss of mechanical properties and a slight improvement of the electrical conductivity of the printed multiscale composites. Selective parameters have been presented for the comparison and selection of compositions of multiscale nanocomposites

Implementasi Model Pembelajaran Kooperatiftipe Jigsaw Untuk Perolehanbelajar Konsep Hak Asasi Manusia

Tujuan penelitian ini adalah untuk mengetahui penerapan model pembelajaran kooperatif tipe jigsaw dalam pembelajaran PKn untuk perolehan belajar konsep hak asasi manusia. Penelitian ini merupakan penelitian deskriptif kualitatif. Sebagai subyek penelitian ini adalah siswa dan guru. Teknik pengumpulan data dalam penelitian ini menggunakan observasi, wawancara dan studi dokumentasi. Analisis data dalam penelitian ini menggunakan prosedur analisis data kualitatif yakni reduksi data, penyajian data dan penyimpulan/verifikasi. Hasil penelitian ini menunjukkan adanya peningkatan perolehan belajar siswa dan telah dilaksanakan dengan baik maka penelitian ini merekomendasikan agar guru dapat menggunakan model pembelajaran kooperatif tipe jigsaw ini sesuai dengan materi pembelajaran sehingga proses pembelajaran lebih bermakna bagi guru maupun siswa. Kata Kunci : Tipe jigsaw, Perolehan Belajar siswa. Abstrac : Research whichaims to know the implementation of Jigsaw type corporative learning model in studying of PKn to achieve the human right learning concept for grade.This research is adescriptive and qualitative. As the subject for this research are students and teacher. Technique of collecting data in the research uses an observation,interview and documentation study. Data analysis in the research uses qualitative data analysis procedures are data reduction, data presentation and conclusion/verification.The output of research is recommended so that teachers are able to use this Jigsaw type cooperative learning model that relevant to studying material so the process oflearning is more meaningful for students and teachers

INFLUENCE OF DOUBLE SOLUTION TREATMENT ON HARDNESS IN 17-4 PH STEEL

The investigated material is a corrosion-resistant, Cu precipitation hardened steel 17-4PH, which undergoes a macroscopic contraction, as a result of applying the following heat treatment: double solution treatment at 1028°C for 1 h (condition A), ageing at 540°C for 4 h (condition H1025). The second solution treatment at 1028°C was found to eliminate the retained austenite, being the evidence of a completely finished martensitic transformation.Indeed, the only phase identified in all samples was fcc lath martensite exhibiting a parallel striped structure. Unfortunately, this additional heat-treatment operation leads likewise to significant and irregular grain growth, which consequently causes a drop in material hardness. Moreover, the second solution annealing, caused a shift in the XRD peaks to higher 2θ angles, resulting from a lattice parameter decrease by0,25%. The two subsequent heat-treatment procedures bring the lattice parameter back to its initial value. This seemingly reversible process of decrease and increase of the lattice parameter was observed for samples subjected to all the heat treatment operations, strongly suggesting the existence of a relation between the microstructural changes and the macroscopic contraction of the steel material. In addition to the martensitic phase, in the unaged samples, a δ- ferrite phase could be identified by TEM and electron diffraction, which is favorable for ductility and toughness of the material. In all samples, non-coherent fcc-NbC precipitates identified by electron diffraction and EDX mapping having sizes up to 70 nm were found

Combining economic and social goals in the design of production systems by using ergonomics standards

In designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational work environments. This paper gives an overview of the 174 international ISO and European CEN standards in this field, and discusses their applicability in design proces

Hydrodynamic gene delivery in human skin using a hollow microneedle device

Microneedle devices have been proposed as a minimally invasive delivery system for the intradermal administration of nucleic acids, both plasmid DNA (pDNA) and siRNA, to treat localised disease or provide vaccination. Different microneedle types and application methods have been investigated in the laboratory, but limited and irreproducible levels of gene expression have proven to be significant challenges to pre-clinical to clinical progression. This study is the first to explore the potential of a hollow microneedle device for the delivery and subsequent expression of pDNA in human skin. The regulatory approved MicronJet600® (MicronJet hereafter) device was used to deliver reporter plasmids (pCMVβ and pEGFP-N1) into viable excised human skin. Exogenous gene expression was subsequently detected at multiple locations that were distant from the injection site but within the confines of the bleb created by the intradermal bolus. The observed levels of gene expression in the tissue are at least comparable to that achieved by the most invasive microneedle application methods e.g. lateral application of a microneedle. Gene expression was predominantly located in the epidermis, although also evident in the papillary dermis. Optical coherence tomography permitted real time visualisation of the sub-surface skin architecture and, unlike a conventional intradermal injection, MicronJet administration of a 50 μL bolus appears to create multiple superficial microdisruptions in the papillary dermis and epidermis. These were co-localised with expression of the pCMVβ reporter plasmid. We have therefore shown, for the first time, that a hollow microneedle device can facilitate efficient and reproducible gene expression of exogenous naked pDNA in human skin using volumes that are considered to be standard for intradermal administration, and postulate a hydrodynamic effect as the mechanism of gene delivery

On Convergence of the Inexact Rayleigh Quotient Iteration with the Lanczos Method Used for Solving Linear Systems

For the Hermitian inexact Rayleigh quotient iteration (RQI), the author has established new local general convergence results, independent of iterative solvers for inner linear systems. The theory shows that the method locally converges quadratically under a new condition, called the uniform positiveness condition. In this paper we first consider the local convergence of the inexact RQI with the unpreconditioned Lanczos method for the linear systems. Some attractive properties are derived for the residuals, whose norms are $\xi_{k+1}$'s, of the linear systems obtained by the Lanczos method. Based on them and the new general convergence results, we make a refined analysis and establish new local convergence results. It is proved that the inexact RQI with Lanczos converges quadratically provided that $\xi_{k+1}\leq\xi$ with a constant $\xi\geq 1$. The method is guaranteed to converge linearly provided that $\xi_{k+1}$ is bounded by a small multiple of the reciprocal of the residual norm $\|r_k\|$ of the current approximate eigenpair. The results are fundamentally different from the existing convergence results that always require $\xi_{k+1}<1$, and they have a strong impact on effective implementations of the method. We extend the new theory to the inexact RQI with a tuned preconditioned Lanczos for the linear systems. Based on the new theory, we can design practical criteria to control $\xi_{k+1}$ to achieve quadratic convergence and implement the method more effectively than ever before. Numerical experiments confirm our theory.Comment: 20 pages, 8 figures. arXiv admin note: text overlap with arXiv:0906.223