Assessment of Ammonia Adsorption onto Teflon and LDPE Tubing used in Pollutant Stream Conveyance

Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a Technical Paper from International Commission of Agricultural Engineering (CIGR, Commission Internationale du Genie Rural) E-Journal Volume 5 (2003): S. Mukhtar, A. Rose, S. Capareda, C. Boriack, R. Lacey, B. Shaw, and C. Parnell. Assessment of Ammonia Adsorption onto Teflon and LDPE Tubing used in Pollutant Stream Conveyance. Vol. V. December 2003

Elucidating the chemical properties and potential applications of wood vinegars produced by controlled thermal treatments.

? Wood vinegar (WV) has been used for ages as fertilizer and antimicrobial agent, but its impacts on ecosystems are not well understood. Our objective was to investigate potential uses for WVs made from biomass resources and evaluate conditions for possible agronomic, chemical/pharmaco-chemical purposes and potential impact on the environment. We studied four woods vinegars made by slow pyrolysis using: Cambara (WVCam), Eucaliptus (WVEuc) at 350ºC for 72 h, Nim (WVNim) and Nim mixed with fresh Nim leaves and branches, soaked into WVNim (WVMix) at 120ºC for 40 h. WVs from WVMix, WVEuc and WVCam demonstrated significant potential chemical products, while WVNim for pharmaceutical purposes. WVs can be used to partially substitute fertilizers and chemicals, most especially WVMix. Soil bacteria tests suggest a concentration of 0.8% or less for WVs application in soils. No WVs tested presented risk for environmental and human health due to absence of carcinogenic poly-aromatic hydrocarbons (PAHs)

Plant–Rhizobium symbiosis, seed nutraceuticals, and waste quality for energy production of Vicia faba L. as affected by crop management

Background: Broad bean fits sustainable agriculture model due to symbiosis with Rhizobium, the seeds being a good source of energy, proteins, polyphenols, and fiber. The large amount of broad bean biomass residues can be employed for biofuel production, thus valorizing the overall production process. This research was aimed to investigate on the effects of farming management, such as greenhouse cultivation and appropriate planting time on the qualities of broad bean seeds and residual biomass for conversion into biofuel. The related balances of energy gain associated to both ethanol yield and nitrogen fertilizer saving due to Rhizobium nitrogen fixation were assessed. Methods: Research was carried out on broad bean in Portici, province of Naples, southern Italy, based on the factorial combination of two farming systems (open field, greenhouse) and five planting times: 27 September and 11 October, to obtain early production; 25 October, which fell in the usual period for broad bean planting in the province area; and 8 November and 22 November, for late production. For each of these cultivation conditions, the quality of seeds, in terms of protein, fiber and antioxidant concentrations, and of crop residual biomass were determined. In addition, the energy yield as ethanol production from residual biomass and nitrogen fertilizer saving due to Rhizobium atmospheric fixation were assessed. Results and discussion: The highest plant nitrogen uptake was recorded under the fourth planting time in open field and the third in greenhouse, the average accumulation attaining 87% in residual biomass, 7.4% in pods, and 5.6% in seeds. Seed protein content was 12.6% higher in greenhouse than in open field and 16.2% higher under the latest planting time compared to the earliest one. Seed polyphenol concentration was higher in open field than in greenhouse and with the two earliest planting times. Greenhouse grown biomass showed higher values of lignin, hemicellulose and pectin, compared to open field, whereas the opposite trend was for cellulose. Lignin showed a decrease from the first to the last crop cycle, opposite to cellulose, and glucose was the most represented monosaccharide. Both the highest theoretical ethanol and overall energy production were highest with the fourth planting time. Conclusions: Greenhouse management enabled broad bean plants to accumulate higher proteins in seeds, but open field conditions resulted in better residual biomass quality for ethanol and Rhizobium-depending energy production

Experimental investigation of pyrolysis of rice straw using bench-scale auger, batch and fluidized bed reactors

Energy conversion efficiencies of three pyrolysis reactors (bench-scale auger, batch, and fluidized bed) were investigated using rice straw as the feedstock at a temperature of 500 °C. The highest bio-oil yield of 43% was obtained from the fluidized bed reactor, while the maximum bio-char yield of 48% was obtained from the batch reactor. Similar bio-oil yields were obtained from the auger and batch type reactors. The GCMS and FTIR were used to evaluate the liquid products from all reactors. The best quality bio-oil and bio-char from the batch reactor was determined to have a heating value of 31 MJ/kg and 19 MJ/kg, respectively. The highest alkali mineral was found in the bio-char produced from the auger reactor. The energy conversion efficiencies of the three reactors indicated that the majority of the energy (50–64%) was in the bio-char products from the auger and batch reactors, while the bio-oil from the fluidized bed reactor contained the highest energy (47%). A Sankey diagram has been produced to show the flows of product energy from each pyrolysis process. The result will help determine which conversion process would be optimal for producing specific products of bio-char, bio-oil, and gas depending on the needs

Experimental investigation of pyrolysis of rice straw using bench-scale auger, batch and fluidized bed reactors

Energy conversion efficiencies of three pyrolysis reactors (bench-scale auger, batch, and fluidized bed) were investigated using rice straw as the feedstock at a temperature of 500 °C. The highest bio-oil yield of 43% was obtained from the fluidized bed reactor, while the maximum bio-char yield of 48% was obtained from the batch reactor. Similar bio-oil yields were obtained from the auger and batch type reactors. The GCMS and FTIR were used to evaluate the liquid products from all reactors. The best quality bio-oil and bio-char from the batch reactor was determined to have a heating value of 31 MJ/kg and 19 MJ/kg, respectively. The highest alkali mineral was found in the bio-char produced from the auger reactor. The energy conversion efficiencies of the three reactors indicated that the majority of the energy (50–64%) was in the bio-char products from the auger and batch reactors, while the bio-oil from the fluidized bed reactor contained the highest energy (47%). A Sankey diagram has been produced to show the flows of product energy from each pyrolysis process. The result will help determine which conversion process would be optimal for producing specific products of bio-char, bio-oil, and gas depending on the needs