Streakline flow visualization of discrete-hole film cooling with normal, slanted, and compound angle injection

Film injection from discrete holes in a three-row, staggered array with five-diameter spacing was studied for three hole angles: (1) normal, (2) slanted 30 deg to the surface in the direction of the main stream, and (3) slanted 30 deg to the surface and 45 deg laterally to the main stream. The ratio of the boundary layer thickness-to-hole diameter and Reynolds number were typical of gas-turbine film-cooling applications. Detailed streaklines showing the turbulent motion of the injected air were obtained by photographing very small neutrally buoyant, helium-filled soap bubbles which follow the flow field

Flow visualization of discrete hole film cooling for gas turbine applications

Film injection from discrete holes in a three row staggered array with 5-diameter spacing is studied. The boundary layer thickness-to-hole diameter ratio and Reynolds number are typical of gas turbine film cooling applications. Two different injection locations are studied to evaluate the effect of boundary layer thickness on film penetration and mixing. Detailed streaklines showing the turbulent motion of the injected air are obtained by photographing neutrally buoyant helium filled soap bubbles which follow the flow field. The bubble streaklines passing downstream injection locations are clearly identifiable and can be traced back to their origin. Visualization of surface temperature patterns obtained from infrared photographs of a similar film cooled surface are also included

Compositional analysis of the very-low-Ti mare basalt component of NWA 773 and comparison with low-Ti basalts, LAP03632 and LAP02436

Abstract not available

An excess of damped Lyman alpha galaxies near QSOs

We present a sample of 33 damped Lyman alpha systems (DLAs) discovered in the Sloan Digital Sky Survey (SDSS) whose absorption redshifts (z_abs) are within 6000 km/s of the QSO's systemic redshift (z_sys). Our sample is based on 731 2.5 < z_sys < 4.5 non-broad-absorption-line (non-BAL) QSOs from Data Release 3 (DR3) of the SDSS. We estimate that our search is ~100 % complete for absorbers with N(HI) >= 2e20 cm^-2. The derived number density of DLAs per unit redshift, n(z), within v < 6000 km/s is higher (3.5 sigma significance) by almost a factor of 2 than that of intervening absorbers observed in the SDSS DR3, i.e. there is evidence for an overdensity of galaxies near the QSOs. This provides a physical motivation for excluding DLAs at small velocity separations in surveys of intervening 'field' DLAs. In addition, we find that the overdensity of proximate DLAs is independent of the radio-loudness of the QSO, consistent with the environments of radio-loud and radio-quiet QSOs being similar.Comment: Accepted for publication in MNRAS (13 pages, 6 figures

Streakline flow visualization of discrete hole film cooling with holes inclined 30 deg to surface

Film injection from three rows of discrete holes angled 30 deg to the surface in line with mainstream flow and spaced 5 diameters apart in a staggered array was visualized by using helium bubbles as tracer particles. Both the main stream and the film injectant were ambient air. Detailed streaklines showing the turbulent motion of the film mixing with the main stream were obtained by photographing small, neutrally buoyant helium-filled soap bubbles which followed the flow field. The ratio of boundary layer thickness to hole diameter and the Reynolds number were typical of gas turbine film cooling applications. The results showed the behavior of the film and its interaction with the main stream for a range of blowing rates and two initial boundary layer thicknesses

Results of the Mariner 6 and 7 Mars occultation experiments

Final profiles of temperature, pressure, and electron density on Mars were obtained for the Mariner 6 and 7 entry and exit cases, and results are presented for both the lower atmosphere and ionosphere. The results of an analysis of the systematic and formal errors introduced at each stage of the data-reduction process are also included. At all four occulation points, the lapse rate of temperature was subdadiabatic up to altitudes in excess of 20 km. A pronounced temperature inversion was present above the surface at the Mariner 6 exit point. All four profiles exhibit a sharp, superadiabatic drop in temperature at high altitudes, with temperatures falling below the frost point of CO2. These results give a strong indication of frozen CO2 in the middle atmosphere of Mars

Flat-top oscillons in an expanding universe

Oscillons are extremely long lived, oscillatory, spatially localized field configurations that arise from generic initial conditions in a large number of non-linear field theories. With an eye towards their cosmological implications, we investigate their properties in an expanding universe. We (1) provide an analytic solution for one dimensional oscillons (for the models under consideration) and discuss their generalization to 3 dimensions, (2) discuss their stability against long wavelength perturbations and (3) estimate the effects of expansion on their shapes and life-times. In particular, we discuss a new, extended class of oscillons with surprisingly flat tops. We show that these flat topped oscillons are more robust against collapse instabilities in (3+1) dimensions than their usual counterparts. Unlike the solutions found in the small amplitude analysis, the width of these configurations is a non-monotonic function of their amplitudes.Comment: v2-matches version published in Phys. Rev D. Updated references and minor modification to section 4.