Flying particle sensors in hollow-core photonic crystal fibre

Optical fibre sensors make use of diverse physical effects to measure parameters such as strain, temperature and electric field. Here we introduce a new class of reconfigurable fibre sensor, based on a 'flying-particle' optically trapped inside a hollow-core photonic crystal fibre and illustrate its use in electric field and temperature sensing with high spatial resolution. The electric field distribution near the surface of a multi-element electrode is measured with a resolution of similar to 100 mu m by monitoring changes in the transmitted light signal due to the transverse displacement of a charged silica microparticle trapped within the hollow core. Doppler-based velocity measurements are used to map the gas viscosity, and thus the temperature, along a hollow-core photonic crystal fibre. The flying-particle approach represents a new paradigm in fibre sensors, potentially allowing multiple physical quantities to be mapped with high positional accuracy over kilometre-scale distances

Fluorescence-based remote irradiation sensor in liquid-filled hollow-core photonic crystal fiber

We report an irradiation sensor based on a fluorescent “flying particle” that is optically trapped and propelled inside the core of a water-filled hollow-core photonic crystal fiber. When the moving particle passes through an irradiated region, its emitted fluorescence is captured by guided modes of the fiber core and so can be monitored using a filtered photodiode placed at the fiber end. The particle speed and position can be precisely monitored using in-fiber Doppler velocimetry, allowing the irradiation profile to be measured to a spatial resolution of ~10 $\mu$m. The spectral response can be readily adjusted by appropriate choice of particle material. Using dye-doped polystyrene particles, we demonstrate detection of green (532 nm) and ultraviolet (340 nm) light.Richard Zeltner acknowledges funding from the Cluster of Excellence “Engineering of Advanced Materials” (www.eam.uni-erlangen.de) at the University of ErlangenNuremberg.This is the author accepted manuscript. The final version is available from AIP Publishing via http://dx.doi.org/10.1063/1.495359

Fluorescence-based flying-particle sensor in liquid-filled hollow-core photonic crystal fiber

© 2016 OSA. We present a novel irradiation sensor based on a fluorescent microparticle that is optically guided inside the core of a liquid-filled photonic crystal fiber. We demonstrate irradiance measurements with spatial resolution of ∼10 μm

Models for guidance in kagome-structured hollow-core photonic crystal fibres

We demonstrate by numerical simulation that the general features of the loss spectrum of photonic crystal fibres (PCF) with a kagome structure can be explained by simple models consisting of thin concentric hexagons or rings of glass in air. These easily analysed models provide increased understanding of the mechanism of guidance in kagome PCF, and suggest ways in which the high-loss resonances in the loss spectrum may be shifted. © 2007 Optical Society of America

Numerical study of guided modes in arrays of metallic nanowires

We numerically investigate the band structure and guided modes within arrays of metallic nanowires. We show that bandgaps appear for a range of array geometries and that these can be used to guide light in these structures. Values of attenuation as low as 1.7 dB/cm are predicted for arrays of silver wires at communications wavelengths. This is more than 100 times smaller than the attenuation of the surface plasmon polariton modes on a single silver nanowire. © 2007 Optical Society of America

RF-dressed Rydberg atoms in hollow-core fibres

The giant electro-optical response of Rydberg atoms manifests itself in the emergence of sidebands in the Rydberg excitation spectrum if the atom is exposed to a radio-frequency (RF) electric field. Here we report on the study of RF-dressed Rydberg atoms inside hollow-core photonic crystal fibres (HC-PCF), a system that enables the use of low modulation voltages and offers the prospect of miniaturised vapour-based electro-optical devices. Narrow spectroscopic features caused by the RF field are observed for modulation frequencies up to 500 MHz.This is the author accepted manuscript. It is currently under an indefinite embargo pending publication by the Institute of Physics

Optical excitation and characterization of gigahertz acoustic resonances in optical fiber tapers

Transverse acoustic resonances at gigahertz frequencies are excited by electrostriction in the few-micrometer-thick waists of low-loss optical fiber tapers of up to 40 cm long. A pump-probe technique is used in which the resonances are excited by a train of optical pulses and probed in a Sagnac interferometer. Strong radially symmetric acoustic resonances are observed and the dependence of their frequencies on taper thickness is investigated. Such easily reconfigurable acousto-optic interactions may have applications in the high-frequency mode locking of fiber lasers. (C) 2008 American Institute of Physics.931

Stable Immobilization of Size-Controlled Bimetallic Nanoparticles in Photonic Crystal Fiber Microreactor

© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. The possibility of immobilizing ex situ-synthesized colloidal bimetallic nanoparticles (NPs) of well-defined characteristics inside hollow core photonic crystal fiber (HC-PCF) microreactors is demonstrated. With the developed method, PtNi clusters remain strongly attached to the fiber core and can be used as active catalysts for the hydrogenation of an azobenzene dye. The study revealed that optical transmission exhibits a size-dependent behavior, i.e., smaller NPs bring in less optical signal loss. Sufficient light transmission was achieved for all particle sizes. Furthermore, with these catalytic PCF microreactors, kinetic data can be obtained with a much lower amount of precious metals compared to a conventional batch reactor, opening a new pathway for in situ catalyst screening

Guided modes in arrays of metallic nanowires

We study numerically the formation of photonic band gaps and guided "defect" modes within two dimensional arrays of metallic nanowires. Attenuations as low as 1.7 dB/cm are predicted for silver wires at 1550 nm wavelength. © 2007 Optical Society of America