The role of activated carbon size in the catalytic cracking of naphthalene

Activated carbons are efficient catalysts for tar cracking, suitable for hot cleaning of the syngas produced during biomass- and waste-to-energy gasification processes. This study investigates the conversion of naphthalene, utilised as reference for tar compounds, when catalysed by a coal-derived activated carbon. The attention focuses on the influence of the operating temperature, in the range 750-900°C, and the size of selected activated carbon, which has been used under form of pellets, granules and powders. The conversion efficiency improves when the temperature raised from 750°C to 900°C (from 79% to 99%, for the pellets), and when the catalyst size reduced from pellets to powders (from 79% to 97%, at 750°C). The diffusional resistance in the catalyst particles has been then quantified in terms of Thiele modulus and internal effectiveness factor. A gradual reduction of catalyst surface area has been also observed for longer tests, due to the progressive deposition of soot from naphthalene decomposition over and inside the porous structure of the activated carbon. The carbon content of these deposits has been quantified, showing larger percentages on the surface of granules and powders.Activated carbons are efficient catalysts for tar cracking, suitable for hot cleaning of the syngas produced during biomass- and waste-to-energy gasification processes. This study investigates the conversion of naphthalene, utilised as reference for tar compounds, when catalysed by a coal-derived activated carbon. The attention focuses on the influence of the operating temperature, in the range 750–900 °C, and the size of selected activated carbon, which has been used under form of pellets, granules and powders. The conversion efficiency improves when the temperature raised from 750 °C to 900 °C (from 79% to 99%, for the pellets), and when the catalyst size reduced from pellets to powders (from 79% to 97%, at 750 °C). The diffusional resistance in the catalyst particles has been then quantified in terms of Thiele modulus and internal effectiveness factor. A gradual reduction of catalyst surface area has been also observed for longer tests, due to the progressive deposition of soot from naphthalene decomposition over and inside the porous structure of the activated carbon. The carbon content of these deposits has been quantified, showing larger percentages on the surface of granules and powders

HYDRODYNAMICS OF UNCONVENTIONAL FLUIDIZED BEDS: SOLIDS FLOW PATTERNS AND THEIR INFLUENCE ON MIXING/SEGREGATION OF A LARGE FLOTSAM PARTICLE IN A BED OF FINER SOLIDS

Gross solids circulation of solid phase and its influence on mixing/segregation of a large flotsam particle in beds of finer solids in unconventional fluidized beds has been investigated. A tapered two-dimensional fluidization column and a fluidization column equipped with a diverging cone as gas distributor have been adopted. The hydrodynamics of the gas-solid suspension in the two apparatus has been qualitatively assessed by visual observation and the trajectories of the centre-of-gravity of large flotsam particles have been evaluated to assess the extent of mixing/segregation

Preliminary activity on the pyrolysis of a plastic based solid recovered fuel

Plastic is a versatile, lightweight, resistant, and inexpensive material, and an increase of its global demand has been observed in the last years (from 299 milion tonnes in 2013 to 348 in 2017) [1], with the dominant role played by the packaging sector, which absorbs almost 40% of the overall production. Management of post–consumer plastic packaging waste poses a serious environmental problem, and a number of strategies have been devised to reuse/recover these materials, mainly with the aim of recovering useful materials and avoiding landfilling. Among these strategies, pyrolysis can play a significant role for recovering useful products and energy from the post–selection mixed packaging waste, that is not amenable to other uses [1]. A large amount of studies has been developed to assess the possibility to convert waste plastic to oil by pyrolysis processes [1] either catalytic or non catalytic. Nevertheless, only a limited numbers of papers refer to the use of real plastic waste rather than simulated mixtures [2] even if the performances obtained are strongly influenced by the feedstock characteristics. Please click Additional Files below to see the full abstract

Binary mixtures of biomass and inert components in fluidized beds: experimental and neural network exploration

Considering the little understanding of the hydrodynamics of multicomponent particle beds involving biomass, a detailed investigation has been performed, which combines well-known experimental and theoretical approaches, relying, respectively, on conventional pressure drop methods and artificial neural network (ANN) techniques. Specific research tasks related to this research work include: i. to experimentally investigate by means of visual observation the mixing and segregation behavior of selected binary mixtures when varying the biomass size and shape as well as the properties (size and density) of the granular solids in cold flow experiments; ii. to carry out a systematic experimental investigation on the effect of the biomass weight and volume fractions on the characteristic velocities (e.g., complete fluidization velocity and minimum slugging velocity) of the investigated binary mixtures in order to select the critical weight fraction of biomass in the mixtures beyond which the fluidization properties deteriorate (e.g., channeling, segregation, slugging); iii. to analyze the results obtained in about 80 cold flow experiments by means of ANN techniques to scrutinize the key factors that influence the behavior and the characteristic properties of binary mixtures. Experimental results suggest that the bed components’ density difference prevails over the size difference in determining the mixing/segregation behavior of binary fluidized bed, whereas the velocities of minimum and complete fluidization increase with a growing biomass weight fraction in the bed. The training of ANNs demonstrated good performances for both outputs (Umf and Ucf); in particular, the best predictions have been obtained for Umf with a MAPE1 <4% (R2=0.98), while for Ucf the best ANN returned a MAPE of about 7% (R2=0.93). The analysis on the importance of each individual input on ANN predictions confirmed the importance of particle density of the bed components. Unexpectedly, results showed that morphological features of biomass have a limited importance on Ucf

Towards Biomass Gasification Enhanced by Structured Iron-Based Catalysts

The main drawback for the development of biomass gasification technology is tar conversion. Among the various methods for tar abatement, the use of catalysts has been proposed in the literature. Most of the works reported in the literature on catalytic systems for biomass tar conversion refers to catalysts in the form of powder; however, deactivation occurs by fast clogging with particulates deriving from biomass gasification. The integration of catalytic filter element for particle and tar removal directly integrated into the freeboard of the reactor is a new concept recently proposed and patented. In this context, this paper evaluates the possibility to integrate a structured iron-based catalytic monolith in the freeboard of a fluidized bed gasifier to enhance biomass gasification. The effectiveness of using a monolith for gas conditioning has been preliminarily verified. The limited effect on the gas production and composition seems to be related to the limited range of operating conditions explored in this work rather than to the low activity of the iron-based catalyst. Further studies to optimize the performance and to assess the possible deactivation of the catalyst due to coke deposition must be carried out

Towards Biomass Gasification Enhanced by Structured Iron-Based Catalysts

The main drawback for the development of biomass gasification technology is tar conversion. Among the various methods for tar abatement, the use of catalysts has been proposed in the literature. Most of the works reported in the literature on catalytic systems for biomass tar conversion refers to catalysts in the form of powder; however, deactivation occurs by fast clogging with particulates deriving from biomass gasification. The integration of catalytic filter element for particle and tar removal directly integrated into the freeboard of the reactor is a new concept recently proposed and patented. In this context, this paper evaluates the possibility to integrate a structured iron-based catalytic monolith in the freeboard of a fluidized bed gasifier to enhance biomass gasification. The effectiveness of using a monolith for gas conditioning has been preliminarily verified. The limited effect on the gas production and composition seems to be related to the limited range of operating conditions explored in this work rather than to the low activity of the iron-based catalyst. Further studies to optimize the performance and to assess the possible deactivation of the catalyst due to coke deposition must be carried out

Pseudo-component thermal decomposition kinetics of tomato peels via isoconversional methods

The kinetics of the thermal decomposition of tomato peel residues under nitrogen atmosphere was studied by non-isothermal thermogravimetric analysis in the heating rate range 2–40 °C/min. Due to the complexity of the kinetic mechanism, which implies simultaneous multi-component decomposition reactions, an analytical approach involving the deconvolution of the overlapping decomposition steps from the overall differential thermogravimetric curves (DTG) and the subsequent application of model-free kinetic methods to the separated peaks was employed. Two freely available Matlab functions, which adopt a non-linear optimization algorithm to decompose a complex overlapping-peak signal into its component parts, were used. Different statistical functions (i.e., Gaussian, Voigt, Pearson, Lorentzian, equal-width Gaussian and equal-width Lorentzian) were tested for deconvolution and the best fits were obtained by using suitable combinations of Gaussian and Lorentzian functions. For the kinetic analysis of the deconvoluted DTG peaks, the Friedman's isoconversional method was adopted, which does not involve any mathematical approximation. The reliability of the derived kinetic parameters was proved by successfully reproducing two non-isothermal conversion curves, which were recorded at a heating rate of 60 °C/min and 80 °C/min and not included in data set used for the kinetic analysis. Seven pseudo-components were identified as a result of the deconvolution procedure and satisfactorily associated with the main constituents of the investigated tomato peels

Isoconversional kinetic analysis of olive pomace decomposition under torrefaction operating conditions

Kinetic analysis of the olive pomace thermal degradation in the temperature range of interest for torrefaction was performed by using non-isothermal thermogravimetric measurements at different heating rates, ranging from 2 to 40 degrees C/min. A comparison is presented between two selected integral isoconversional methods, i.e., the nonlinear Vyazovkin incremental approach, which is more accurate but time-consuming, and the linear Ozawa-Flynn-Wall (OFW) method, which is less accurate but computationally simpler. Results show that the values of the activation energy by the OFW method are consistent with the ones provided by the Vyazovkin approach. This implies that the OFW method, more user-friendly compared to the Vyazovkin procedure, is suitable for studying the torrefaction kinetics of residual biomass, such as olive pomace. The reliability of the OFW method was further confirmed by the successful application of the derived kinetic data to reproduce (i.e., predict) experimental TG curves not included in the kinetic computations