First-principles study of the Young's modulus of Si <001> nanowires

We report the results of first-principles density functional theory calculations of the Young's modulus and other mechanical properties of hydrogen-passivated Si nanowires. The nanowires are taken to have predominantly {100} surfaces, with small {110} facets. The Young's modulus, the equilibrium length and the residual stress of a series of prismatic wires are found to have a size dependence that scales like the surface area to volume ratio for all but the smallest wires. We analyze the physical origin of the size dependence, and compare the results to two existing models.Comment: 5 pages, 3 figure

First-principles calculation of mechanical properties of Si <001> nanowires and comparison to nanomechanical theory

We report the results of first-principles density functional theory calculations of the Young's modulus and other mechanical properties of hydrogen-passivated Si nanowires. The nanowires are taken to have predominantly {100} surfaces, with small {110} facets according to the Wulff shape. The Young's modulus, the equilibrium length and the constrained residual stress of a series of prismatic beams of differing sizes are found to have size dependences that scale like the surface area to volume ratio for all but the smallest beam. The results are compared with a continuum model and the results of classical atomistic calculations based on an empirical potential. We attribute the size dependence to specific physical structures and interactions. In particular, the hydrogen interactions on the surface and the charge density variations within the beam are quantified and used both to parameterize the continuum model and to account for the discrepancies between the two models and the first-principles results.Comment: 14 pages, 10 figure

Nucleation and Growth of GaN/AlN Quantum Dots

We study the nucleation of GaN islands grown by plasma-assisted molecular-beam epitaxy on AlN(0001) in a Stranski-Krastanov mode. In particular, we assess the variation of their height and density as a function of GaN coverage. We show that the GaN growth passes four stages: initially, the growth is layer-by-layer; subsequently, two-dimensional precursor islands form, which transform into genuine three-dimensional islands. During the latter stage, island height and density increase with GaN coverage until the density saturates. During further GaN growth, the density remains constant and a bimodal height distribution appears. The variation of island height and density as a function of substrate temperature is discussed in the framework of an equilibrium model for Stranski-Krastanov growth.Comment: Submitted to PRB, 10 pages, 15 figure

Viking navigation

A comprehensive description of the navigation of the Viking spacecraft throughout their flight from Earth launch to Mars landing is given. The flight path design, actual inflight control, and postflight reconstruction are discussed in detail. The preflight analyses upon which the operational strategies and performance predictions were based are discussed. The inflight results are then discussed and compared with the preflight predictions and, finally, the results of any postflight analyses are presented

Rethinking place and the social work office in the delivery of children's social work services

Limited attention has been given to the concept of place in social work research and practice. This paper draws on the national evaluation of social work practices (SWPs) in England undertaken between 2009 and 2012. SWPs were pilot organisations providing independent social work services for children in out-of-home care in five sites. One factor distinguishing some of these pilots was their attention to place. The evaluation employed a mixed methods approach and we use data from interviews with 121 children and young people in out-of-home care, 19 birth parents and 31 interviews with SWP staff which explored their views and experiences of the SWP offices. Children and young people were alert to the stigma which could attach to social work premises and appreciated offices which were planned and furnished to appear less institutional and more ‘normal’. Daily interactions with staff which conveyed a sense of recognition and value to service users also contributed to a view of some SWP offices as accessible and welcoming places. Both children and parents appreciated offices that provided fun activities that positioned them as active rather than passive. Staff valued opportunities for influencing planning decisions about offices and place was seen to confer a value on them as well as on service users. However, not all the SWPs were able to achieve these aspects of place, and engaging children and families in place was less likely when the service user population was widely dispersed. Recognising the importance of place and how place is constructed through relationships between people as well as through the physical environment appeared to be key to creating offices that combated the stigma attached to out-of-home care. Those leading and managing children’s services should explore ways of involving local communities in planning social work offices and turn attention to making these offices accessible, welcoming, places

Dynamic of a non homogeneously coarse grained system

To study materials phenomena simultaneously at various length scales, descriptions in which matter can be coarse grained to arbitrary levels, are necessary. Attempts to do this in the static regime (i.e. zero temperature) have already been developed. In this letter, we present an approach that leads to a dynamics for such coarse-grained models. This allows us to obtain temperature-dependent and transport properties. Renormalization group theory is used to create new local potentials model between nodes, within the approximation of local thermodynamical equilibrium. Assuming that these potentials give an averaged description of node dynamics, we calculate thermal and mechanical properties. If this method can be sufficiently generalized it may form the basis of a Molecular Dynamics method with time and spatial coarse-graining.Comment: 4 pages, 4 figure

Cisplatin-induced emesis: systematic review and meta-analysis of the ferret model and the effects of 5-HT3 receptor antagonists

PURPOSE: The ferret cisplatin emesis model has been used for ~30 years and enabled identification of clinically used anti-emetics. We provide an objective assessment of this model including efficacy of 5-HT(3) receptor antagonists to assess its translational validity. METHODS: A systematic review identified available evidence and was used to perform meta-analyses. RESULTS: Of 182 potentially relevant publications, 115 reported cisplatin-induced emesis in ferrets and 68 were included in the analysis. The majority (n = 53) used a 10 mg kg(−1) dose to induce acute emesis, which peaked after 2 h. More recent studies (n = 11) also used 5 mg kg(−1), which induced a biphasic response peaking at 12 h and 48 h. Overall, 5-HT(3) receptor antagonists reduced cisplatin (5 mg kg(−1)) emesis by 68% (45–91%) during the acute phase (day 1) and by 67% (48–86%) and 53% (38–68%, all P < 0.001), during the delayed phase (days 2, 3). In an analysis focused on the acute phase, the efficacy of ondansetron was dependent on the dosage and observation period but not on the dose of cisplatin. CONCLUSION: Our analysis enabled novel findings to be extracted from the literature including factors which may impact on the applicability of preclinical results to humans. It reveals that the efficacy of ondansetron is similar against low and high doses of cisplatin. Additionally, we showed that 5-HT(3) receptor antagonists have a similar efficacy during acute and delayed emesis, which provides a novel insight into the pharmacology of delayed emesis in the ferret

Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods

Fibre reinforced composites have recently received much attention as potential bone fracture fixation applications. Bioresorbable composites based on poly lactic acid (PLA) and phosphate based glass fibre were investigated according to ion release, degradation, biocompatibility and mechanical retention profiles. The phosphate based glass fibres used in this study had the composition of 40P2O5-24MgO-16CaO-16Na2O- 4Fe2O3 in mol% (P40). The degradation and ion release profiles for the composites showed similar trends with the amount of sodium and orthophosphate ions released being greater than the other cations and anions investigated. This was attributed to low Dietzal's field strength for the Na+ in comparison with Mg2 + and Ca2 + and breakdown of longer chain polyphosphates into orthophosphate ions. P40 composites exhibited good biocompatibility to human mesenchymal stem cells (MSCs), which was suggested to be due to the low degradation rate of P40 fibres. After 63 days immersion in PBS at 37 C, the P40 composite rods lost ∼ 1.1% of mass. The wet flexural, shear and compressive strengths for P40 UD rods were ∼ 70%, ∼ 80% and ∼ 50% of their initial dry values after 3 days of degradation, whereas the flexural modulus, shear and compressive strengths were ∼ 70%, ∼ 80%, and ∼ 65% respectively. Subsequently, the mechanical properties remained stable for the duration of the study at 63 days. The initial decrease in mechanical properties was attributed to a combination of the plasticisation effect of water and degradation of the fibre-matrix interface, with the subsequent linear behaviour being attributed to the chemical durability of P40 fibres. P40 composite rods showed low degradation and ion release rates, good biocompatibility and maintained mechanical properties similar to cortical bone for the duration of the study. Therefore, P40 composite rods have huge potential as resorbable intramedullary nails or rods. © 2013 Elsevier B.V

Lessons for major system change: centralization of stroke services in two metropolitan areas of England

OBJECTIVES: Our aim was to identify the factors influencing the selection of a model of acute stroke service centralization to create fewer high-volume specialist units in two metropolitan areas of England (London and Greater Manchester). It considers the reasons why services were more fully centralized in London than in Greater Manchester. METHODS: In both areas, we analysed 316 documents and conducted 45 interviews with people leading transformation, service user organizations, providers and commissioners. Inductive and deductive analyses were used to compare the processes underpinning change in each area, with reference to propositions for achieving major system change taken from a realist review of the existing literature (the Best framework), which we critique and develop further. RESULTS: In London, system leadership was used to overcome resistance to centralization and align stakeholders to implement a centralized service model. In Greater Manchester, programme leaders relied on achieving change by consensus and, lacking decision-making authority over providers, accommodated rather than challenged resistance by implementing a less radical transformation of services. CONCLUSIONS: A combination of system (top-down) and distributed (bottom-up) leadership is important in enabling change. System leadership provides the political authority required to coordinate stakeholders and to capitalize on clinical leadership by aligning it with transformation goals. Policy makers should examine how the structures of system authority, with performance management and financial levers, can be employed to coordinate transformation by aligning the disparate interests of providers and commissioners

Renormalization group approach to multiscale modelling in materials science

Dendritic growth, and the formation of material microstructure in general, necessarily involves a wide range of length scales from the atomic up to sample dimensions. The phase field approach of Langer, enhanced by optimal asymptotic methods and adaptive mesh refinement, copes with this range of scales, and provides an effective way to move phase boundaries. However, it fails to preserve memory of the underlying crystallographic anisotropy, and thus is ill-suited for problems involving defects or elasticity. The phase field crystal (PFC) equation-- a conserving analogue of the Hohenberg-Swift equation --is a phase field equation with periodic solutions that represent the atomic density. It can natively model elasticity, the formation of solid phases, and accurately reproduces the nonequilibrium dynamics of phase transitions in real materials. However, the PFC models matter at the atomic scale, rendering it unsuitable for coping with the range of length scales in problems of serious interest. Here, we show that a computationally-efficient multiscale approach to the PFC can be developed systematically by using the renormalization group or equivalent techniques to derive appropriate coarse-grained coupled phase and amplitude equations, which are suitable for solution by adaptive mesh refinement algorithms