Perspectives on Electric Machines with Cryogenic Cooling

Cryogenic cooling is a well-established and expanding technology. In the field of electric machines, it allows the construction of more efficient machines with a high power density. This paper addresses the main cooling technologies and their impact on cryogenic machine construction, providing perspective for their use in future electrical machines. Although cost and safety issues of cryogenic systems are still holding back the uptake of cryogenic electric motors and generators, research in this field should provide significant improvements and promote their use at different levels

RESTING CYSTS FROM COASTAL MARINE PLANKTON

Coastal plankton show fluctuations in abundance and species composition. Resting stage (cyst) production is a common strategy adopted by hundreds of plankton species to ensure reproduction and to avoid adverse conditions. During the resting period, these species are normally absent from the water column, and cysts produced in the plankton accumulate in the sediment where they wait for the return of suitable conditions. A portion of the cyst bank does not hatch, instead undergoing a dormancy that may extend for decades. Confined coastal areas accumulate cysts in sediment due to one or more possibilities, including reduced water movement/hydrodynamics, high population density, abundance of cyst-producing species, and the absence or scarcity of possible cyst consumers in the benthos. The pelagic-benthic nexus, which affects both the sediment and the water column (and possibly sea ice) is still poorly understood. In fact, the presence of cysts in the life cycle of organisms is likely to have considerable consequences for the ecology of coastal plankton, as well as the evolution and biogeography of species. This review aims to depict the presence (and even abundance) of resting stages in marine environments and their impact on ecosystem functioning. The review starts with a description of encysted resting stages in all marine planktonic taxa, listing a total of 501 species with known cysts, and methods and tools for their collection and study. The physiology and timing of the rest period is then described for various taxa, followed by a discussion of the evolutionary implications of resting. The presence of encysted stages in different realms and phyla of plankton suggests an ancient origin and a successive diversification of morphologies that, today, roughly characterise each taxa. Ecological and biogeographical implications stem from this general framework and support the hypothesis of seasonal occurrences of planktonic life in ecosystems where productivity is suspended for a long time (e.g. in polar seas). The potential to suspend or resume life has implications for human activities, such as the risk of translocations through ship ballast water and contamination of water and seafood with toxins but also the benefit of cysts for the production of aquaculture feed. The review concludes with perspectives on present knowledge and outstanding questions to address in future studies

Design aspects of a CMC coating-like system for hot surfaces of aero engine components

Ceramic Matrix Composite (CMC) is an emerging material system that can be a game changer in the aerospace industry, both civil and military. CMCs components are, in fact, lighter and less prone to fatigue failure in a high temperature environment. However, at high temperatures, the diffusion of oxygen and water vapour inside the CMC can have detrimental effects. Therefore, the presence of protective coating is necessary to extend the life of CMC components. In the present work, a three-layers coating, consisting of a silicon bond (BND), adhesively bonded to the CMC, an Environment Barrier Coating (EBC) and a softer layer 3 (LAY3), is investigated for a CMC component. An aero-engine high pressure turbine seal segment was considered. Two design aspects are covered: (i) creep law is determined and calibrated in environment Abaqus from the experimental data of each coating layer available in the open literature, to provide a suitable instrument for the creep relaxation analyses of hot components; (ii) thickness sensitivity study of each layer of the coating is conducted to minimise the interface stresses of coating with substrate in order to mitigate cracking and removal/spalling phenomena when exposed to temperature gradients and to increase their service life. These two different aspects are combined together to predict the coating stress field as a function of service time

Abrasive fluidized bed finishing to improve the fatigue behaviour of Ti6Al4V parts fabricated by electron beam melting

A study of the abrasive fluidized bed (AFB) finishing process was conducted to quantify the obtainable improvement of the fatigue behaviour of Ti6Al4V parts produced by electron beam melting (EBM). Axial-symmetric EBM samples were rotated at high speed inside a fluidized bed of stainless-steel media. The effects of the treatment time and the rotational speed on morphological features and fatigue life of the EBM samples were investigated. Outcomes showed that the improvement in surface properties induced by the AFB finishing process determined an increase up to 50% in fatigue life and a shift of the S-N curve

Reply to Comment on: Hawking radiation from ultrashort laser pulse filaments

A comment by R. Schutzhold et al. raises possible concerns and questions regarding recent measurements of analogue Hawking radiation. We briefly reply to the opinions expressed in the comment and sustain that the origin of the radiation may be understood in terms of Hawking emission

Association between serum Mg2+ concentrations and cardiovascular organ damage in a cohort of adult subjects

Magnesium (Mg2+) levels are associated with insulin resistance, hypertension, atherosclerosis, and type 2 diabetes (T2DM). We evaluated the clinical utility of physiological Mg2+ in assessing subclinical cardiovascular organ damage including increased carotid artery intima-media thickness (c-IMT) and left ventricular mass index (LVMI) in a cohort of well-characterized adult non-diabetic individuals. Age-and gender-adjusted correlations between Mg2+ and metabolic parameters showed that Mg2+ circulating levels were correlated negatively with body mass index (BMI), fasting glucose, and 2h-oral glucose tolerance test (OGTT) glucose. Similarly, Mg2+ levels were significantly and negatively related to c-IMT and LVMI. A multivariate regression analysis revealed that age (β = 0.440; p < 0.0001), BMI (β = 0.225; p < 0.0001), and Mg2+ concentration (β = −0.122; p < 0.01) were independently associated with c-IMT. Age (β = 0.244; p = 0.012), Mg2+ (β = −0.177; p = 0.019), and diastolic blood pressure (β = 0.184; p = 0.038) were significantly associated with LVMI in women, while age (β = 0.211; p = 0.019), Mg2+ (β = −0.171; p = 0.038) and the homeostasis model assessment index of insulin resistance (HOMA-IR) (β = −0.211; p = 0.041) were the sole variables associated with LVMI in men. In conclusion, our data support the hypothesis that the assessment of Mg2+ as part of the initial work-up might help unravel the presence of subclinical organ damage in subjects at increased risk of cardiovascular complications

Development and laboratory testing of a self-excited synchronous machines without permanent magnets

Today, self-excited synchronous machines are the object of increasing interest because they use neither brushes nor permanent magnets. In fact, the price of rare earth metals is considerably high and still raising. This is the main reason why researchers are looking for suitable alternatives to permanent magnets in the construction of rotating electrical machinery. This paper deals with the design and laboratory testing of a synchronous machine with an efficient layout and an economic construction. The proposed self-excited machine exploits the space harmonics of the magneto-motive force to produce the excitation field. The model analysis is based on the computation of the back EMFs that are associated to the magneto motive force components. The mathematical model suggests an easy way to decouple the rotor windings. The machine has been built and experimental tests have been performed in order to validate the electrical behavior

Wood-Reinforced Polyphthalamide Resins: MultiFunctional Composite Coating for Metal Substrates

Protective layers were deposited on aluminum substrates by dipping them inside a fluidized bed (FB) of wood and polyphthalamide powders. The experimental investigation looked into the influence of the main process parameters (number and composition of superimposed layers, heating temperature, and dipping time) on the visual appearance, scratch adhesion, wear resistance, and thermal insulation of the resulting coatings. Micromechanical and tribological responses of the coatings were significantly improved by the effect of the wooden particles dispersed inside the polyphthalamide binder. An improvement of the thermal insulation was also achieved whatever the setting of the process parameters. Further, the coatings displayed good adhesion to the substrate and wear endurance