784 research outputs found
Impact of surface roughness on diffusion of confined fluids
Using event-driven molecular dynamics simulations, we quantify how the self
diffusivity of confined hard-sphere fluids depends on the nature of the
confining boundaries. We explore systems with featureless confining boundaries
that treat particle-boundary collisions in different ways and also various
types of physically (i.e., geometrically) rough boundaries. We show that, for
moderately dense fluids, the ratio of the self diffusivity of a rough wall
system to that of an appropriate smooth-wall reference system is a linear
function of the reciprocal wall separation, with the slope depending on the
nature of the roughness. We also discuss some simple practical ways to use this
information to predict confined hard-sphere fluid behavior in different
rough-wall systems
Does Young's equation hold on the nanoscale? A Monte Carlo test for the binary Lennard-Jones fluid
When a phase-separated binary () mixture is exposed to a wall, that
preferentially attracts one of the components, interfaces between A-rich and
B-rich domains in general meet the wall making a contact angle .
Young's equation describes this angle in terms of a balance between the
interfacial tension and the surface tensions ,
between, respectively, the - and -rich phases and the wall,
. By Monte Carlo simulations
of bridges, formed by one of the components in a binary Lennard-Jones liquid,
connecting the two walls of a nanoscopic slit pore, is estimated from
the inclination of the interfaces, as a function of the wall-fluid interaction
strength. The information on the surface tensions ,
are obtained independently from a new thermodynamic integration method, while
is found from the finite-size scaling analysis of the
concentration distribution function. We show that Young's equation describes
the contact angles of the actual nanoscale interfaces for this model rather
accurately and location of the (first order) wetting transition is estimated.Comment: 6 pages, 6 figure
Recommended from our members
Simple model of adsorption on external surface of carbon nanotubes: a new analytical approach basing on molecular simulation data
Nitrogen adsorption on carbon nanotubes is wide- ly studied because nitrogen adsorption isotherm measurement is a standard method applied for porosity characterization. A further reason is that carbon nanotubes are potential adsorbents for separation of nitrogen from oxygen in air. The study presented here describes the results of GCMC simulations of nitrogen (three site model) adsorption on single and multi walled closed nanotubes. The results obtained are described by a new adsorption isotherm model proposed in this study. The model can be treated as the tube analogue of the GAB isotherm taking into account the lateral adsorbate-adsorbate interactions. We show that the model describes the simulated data satisfactorily. Next this new approach is applied for a description of experimental data measured on different commercially available (and characterized using HRTEM) carbon nanotubes. We show that generally a quite good fit is observed and therefore it is suggested that the observed mechanism of adsorption in the studied materials is mainly determined by adsorption on tubes separated at large distances, so the tubes behave almost independently
From Capillary Condensation to Interface Localization Transitions in Colloid Polymer Mixtures Confined in Thin Film Geometry
Monte Carlo simulations of the Asakura-Oosawa (AO) model for colloid-polymer
mixtures confined between two parallel repulsive structureless walls are
presented and analyzed in the light of current theories on capillary
condensation and interface localization transitions. Choosing a polymer to
colloid size ratio of q=0.8 and studying ultrathin films in the range of D=3 to
D=10 colloid diameters thickness, grand canonical Monte Carlo methods are used;
phase transitions are analyzed via finite size scaling, as in previous work on
bulk systems and under confinement between identical types of walls. Unlike the
latter work, inequivalent walls are used here: while the left wall has a
hard-core repulsion for both polymers and colloids, at the right wall an
additional square-well repulsion of variable strength acting only on the
colloids is present. We study how the phase separation into colloid-rich and
colloid-poor phases occurring already in the bulk is modified by such a
confinement. When the asymmetry of the wall-colloid interaction increases, the
character of the transition smoothly changes from capillary condensation-type
to interface localization-type. The critical behavior of these transitions is
discussed, as well as the colloid and polymer density profiles across the film
in the various phases, and the correlation of interfacial fluctuations in the
direction parallel to the confining walls. The experimental observability of
these phenomena also is briefly discussed.Comment: 36 pages, 15 figure
Compaction of microporous amorphous solid water by ion irradiation
We have studied the compaction of vapor-deposited amorphous solid water by energetic ions at 40 K. The porosity was characterized by ultraviolet-visible spectroscopy, infrared spectroscopy, and methane adsorption/desorption. These three techniques provide different and complementary views of the structural changes in ice resulting from irradiation. We find that the decrease in internal surface area of the pores, signaled by infrared absorption by dangling bonds, precedes the decrease in the pore volume during irradiation. Our results imply that impacts from cosmic rays can cause compaction in the icy mantles of the interstellar grains, which can explain the absence of dangling bond features in the infrared spectrum of molecular clouds.Fil: Raut, U.. University of Virginia; Estados UnidosFil: Teolis, B. D.. University of Virginia; Estados UnidosFil: Loeffler, M. J.. University of Virginia; Estados UnidosFil: Vidal, Ricardo Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Famá, M.. University of Virginia; Estados UnidosFil: Baragiola, R. A.. University of Virginia; Estados Unido
Oxygen Absorption in Free-Standing Porous Silicon: A Structural, Optical and Kinetic Analysis
Porous silicon (PSi) is a nanostructured material possessing a huge surface area per unit volume. In consequence, the adsorption and diffusion of oxygen in PSi are particularly important phenomena and frequently cause significant changes in its properties. In this paper, we study the thermal oxidation of p+-type free-standing PSi fabricated by anodic electrochemical etching. These free-standing samples were characterized by nitrogen adsorption, thermogravimetry, atomic force microscopy and powder X-ray diffraction. The results show a structural phase transition from crystalline silicon to a combination of cristobalite and quartz, passing through amorphous silicon and amorphous silicon-oxide structures, when the thermal oxidation temperature increases from 400 to 900 °C. Moreover, we observe some evidence of a sinterization at 400 °C and an optimal oxygen-absorption temperature about 700 °C. Finally, the UV/Visible spectrophotometry reveals a red and a blue shift of the optical transmittance spectra for samples with oxidation temperatures lower and higher than 700 °C, respectively
Vanadium oxide supported on porous clay heterostructure for the partial oxidation of hydrogen sulphide to sulfur
Vanadium oxide supported on porous clay heterostructures (PCH) catalysts have been synthesized, characterized and evaluated in the selective oxidation of H2S to elemental sulfur. The catalysts were characterized by XRD, adsorption-desorption of N-2 at -196 degrees C, diffuse reflectance UV-vis, H-2-TPR, Raman spectroscopy and XPS. The catalysts with higher vanadium content are more active and selective, exhibiting a H2S conversion close to 70% after 360h on stream with a high selectivity toward elemental sulfur and a low formation of undesired SO2. The catalysts with V2O5 crystallites have shown a higher activity and resistance to the deactivation. The analysis of the spent catalyst has revealed the formation of V4O9 crystals during the catalytic test, which has been reported as the active phase in the selective oxidation of the H2S. (C) 2015 Elsevier B.V. All rights reserved.The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-C03-01, CTQ2012-37925-C03-03 and FEDER funds, and MAT2010-19837-C06-05) and project of Excellence of Junta de Andalucia (project P12-RNM-1565) for financial support. A. Natoli thanks to SECAT (Spain) for a grant.Soriano Rodríguez, MD.; Cecilia, JA.; Natoli, A.; Jimenez-Jimenez, J.; López Nieto, JM.; Rodriguez Castellon, E. (2015). Vanadium oxide supported on porous clay heterostructure for the partial oxidation of hydrogen sulphide to sulfur. Catalysis Today. 254:36-42. https://doi.org/10.1016/j.cattod.2014.12.022S364225
Reduction of aldehydes and hydrogen cyanide yields in mainstream cigarette smoke using an amine functionalised ion exchange resin
<p>Abstract</p> <p>Background</p> <p>Cigarette smoking is a well recognized cause of diseases such as lung cancer, chronic obstructive pulmonary disease and cardiovascular disease. Of the more than 5000 identified species in cigarette smoke, at least 150 have toxicological activity. For example, formaldehyde and acetaldehyde have been assigned as Group 1 and Group 2B carcinogens by IARC, and hydrogen cyanide has been identified as a respiratory and cardiovascular toxicant. Active carbon has been shown to be an effective material for the physical adsorption of many of the smoke volatile species. However, physical adsorption of acetaldehyde, formaldehyde and also hydrogen cyanide from smoke is less effective using carbon. Alternative methods for the removal of these species from cigarette smoke are therefore of interest. A macroporous, polystyrene based ion-exchange resin (Diaion<sup>®</sup>CR20) with surface amine group functionality has been investigated for its ability to react with aldehydes and HCN in an aerosol stream, and thus selectively reduce the yields of these compounds (in particular formaldehyde) in mainstream cigarette smoke.</p> <p>Results</p> <p>Resin surface chemistry was characterized using vapour sorption, XPS, TOF-SIMS and <sup>15</sup>N NMR. Diaion<sup>®</sup>CR20 was found to have structural characteristics indicating weak physisorption properties, but sufficient surface functionalities to selectively remove aldehydes and HCN from cigarette smoke. Using 60 mg of Diaion<sup>®</sup>CR20 in a cigarette cavity filter gave reductions in smoke formaldehyde greater than 50% (estimated to be equivalent to >80% of the formaldehyde present in the smoke vapour phase) independent of a range of flow rates. Substantial removal of HCN (>80%) and acetaldehyde (>60%) was also observed. The performance of Diaion<sup>®</sup>CR20 was found to be consistent over a test period of 6 months. The overall adsorption for the majority of smoke compounds measured appeared to follow a pseudo-first order approximation to second order kinetics.</p> <p>Conclusions</p> <p>This study has shown that Diaion<sup>®</sup>CR20 is a highly selective and efficient adsorbent for formaldehyde, acetaldehyde and HCN in cigarette smoke. The reductions for these compounds were greater than those achieved using an active carbon. The results also demonstrate that chemisorption can be an effective mechanism for the removal of certain vapour phase toxicants from cigarette smoke.</p
- …