In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures

Polymer nanocomposites have always attracted the interest of researchers and industry because of their potential combination of properties from both the nanofillers and the hosting matrix. Gathering nanomaterials and 3D printing could offer clear advantages and numerous new opportunities in several application fields. Embedding nanofillers in a polymeric matrix could improve the final material properties but usually the printing process gets more difficult. Considering this drawback, in this paper we propose a method to obtain polymer nanocomposites by in situ generation of nanoparticles after the printing process. 3D structures were fabricated through a Digital Light Processing (DLP) system by disolving metal salts in the starting liquid formulation. The 3D fabrication is followed by a thermal treatment in order to induce in situ generation of metal nanoparticles (NPs) in the polymer matrix. Comprehensive studies were systematically performed on the thermo-mechanical characteristics, morphology and electrical properties of the 3D printed nanocomposites

A Facile and Green Microwave-Assisted Strategy to Induce Surface Properties on Complex-Shape Polymeric 3D Printed Structures

Light- induced polymeric 3D printing is becoming a well-established fabrication method, showing manifold advantages such as control of the local chemistry of the manufactured devices. It can be considered a green technology, since the parts are produced when needed and with minimum amount of materials. In this work 3D printing is combined with another green technology, microwave-assisted reaction, to fabricate objects of complex geometry with controllable surface properties, exploiting the presence of remaining functional groups on the surface of 3D printed specimens. In this context, surface functionalization with different amines is studied, optimizing formulations, reaction times, and avoiding surface deterioration. Then, two different applications are investigated. MW-functionalized filter-type structures have been tested against Staphylococcus aureus bacteria, showing high bactericidal activity on the surface along all areas of the complex-shaped structure. Second, a fluidic chip composed of three separated channels is 3D printed, filled with different amine-reactive dyes (dansyl and eosine derivatives), and made to react simultaneously. Complete and independent functionalization of the surface of the three channels is achieved only after 2 min of irradiation. This study demonstrates that light induced 3D printing and microwave-induced chemistry can be used together effectively, and used to produce functional devices

A Facile and Green Microwave-Assisted Strategy to Induce Surface Properties on Complex-Shape Polymeric 3D Printed Structures

Light- induced polymeric 3D printing is becoming a well-established fabrication method, showing manifold advantages such as control of the local chemistry of the manufactured devices. It can be considered a green technology, since the parts are produced when needed and with minimum amount of materials. In this work 3D printing is combined with another green technology, microwave-assisted reaction, to fabricate objects of complex geometry with controllable surface properties, exploiting the presence of remaining functional groups on the surface of 3D printed specimens. In this context, surface functionalization with different amines is studied, optimizing formulations, reaction times, and avoiding surface deterioration. Then, two different applications are investigated. MW-functionalized filter-type structures have been tested against Staphylococcus aureus bacteria, showing high bactericidal activity on the surface along all areas of the complex-shaped structure. Second, a fluidic chip composed of three separated channels is 3D printed, filled with different amine-reactive dyes (dansyl and eosine derivatives), and made to react simultaneously. Complete and independent functionalization of the surface of the three channels is achieved only after 2 min of irradiation. This study demonstrates that light induced 3D printing and microwave-induced chemistry can be used together effectively, and used to produce functional devices

Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing

Light-based 3D printing techniques could be a valuable instrument in the development of customized and affordable biomedical devices, basically for high precision and high flexibility in terms of materials of these technologies. However, more studies related to the biocompatibility of the printed objects are required to expand the use of these techniques in the health sector. In this work, 3D printed polymeric parts are produced in lab conditions using a commercial Digital Light Processing (DLP) 3D printer and then successfully tested to fabricate components suitable for biological studies. For this purpose, different 3D printable formulations based on commercially available resins are compared. The biocompatibility of the 3D printed objects toward A549 cell line is investigated by adjusting the composition of the resins and optimizing post-printing protocols; those include washing in common solvents and UV post-curing treatments for removing unreacted and cytotoxic products. It is noteworthy that not only the selection of suitable materials but also the development of an adequate post-printing protocol is necessary for the development of biocompatible devices

3D printable acrylate polydimethylsiloxane resins for cell culture and drug testing

Nowadays, most of the microfluidic devices for biological applications are fabricated with only few well-established materials. Among these, polydimethylsiloxane (PDMS) is the most used and known. However, it has many limitations, like the operator dependent and time-consuming manufacturing technique and the high molecule retention. TEGORad or Acrylate PDMS is an acrylate polydimethylsiloxane copolymer that can be 3D printed through Digital Light Processing (DLP), a technology that can boast reduction of waste products and the possibility of low cost and rapid manufacturing of complex components. Here, we developed 3D printed Acrylate PDMS-based devices for cell culture and drug testing. Our in vitro study shows that Acrylate PDMS can sustain cell growth of lung and skin epithelium, both of great interest for in vitro drug testing, without causing any genotoxic effect. Moreover, flow experiments with a drug-like solution (Rhodamine 6G) show that Acrylate PDMS drug retention is negligible unlike the high signal shown by PDMS. In conclusion, the study demonstrates that this acrylate resin can be an excellent alternative to PDMS to design stretchable platforms for cell culture and drug testing

In situ generation of silver nanoparticles in PVDF for the development of resistive switching devices

It is widely accepted that resistive switching devices (RSDs) are extremely appealing as active components in computer memories and logic gates in electronics, directly enabling neuromorphic functionalities. The aim of this study is to investigate the chemical and electrical properties of a nanocomposite polymer, the active component of the device, in order to characterise its composition and behaviour under electric field. This paper presents the morphological and chemical characterization of an in-situ generated silver – Polyvinylidene fluoride-hexafluoropropylene PVDF-HFP nanocomposite (NC) material. A silver salt is added as precursor to the polymer solution and then, after a film casting step, the nanoparticles generation and growth processes are carried out by way of UV irradiation; the growth and the distribution of in-situ generated silver nanoparticles (NPs) in the polymer matrix are described. The devices, built on a planar electrode structure, undergo an I/V test to explore their resistance states at different switching voltages. Furthermore, after electrical analysis a remarkable R off /R on ratio and a relatively low switching voltage (3 V) are achieved, demonstrating the suitability of the developed material for the next generation of soft, wearable, RSDs

Single-Step 3D Printing of Silver-Patterned Polymeric Devices for Bacteria Proliferation Control

This work describes the fabrication of silver-patterned polymeric devices via light-based 3D printing methods from a tailored resin. An acrylate resin containing silver nitrate (AgNO3) as a silver precursor is employed to generate silver nanoparticles (AgNPs) through the in situ reduction of the metallic salt. The silver-based resin is processed through a customized stereolithography SL-3D printing to fabricate structures with silver-patterned surfaces. This customized SL-printer (emitting at 405 nm) offers the possibility of adjusting the machine settings during the printing process allowing for AgNPs to be selectively generated by modifying the laser settings during the 3D printing step. Thus, the resin photopolymerization and the photoinduced formation of AgNPs-based strands can be sequentially achieved during the same printing process with the same light source and using the same printable resin. The fabricated silver-patterned devices exhibit different surface features that might be exploited in systems working in a marine environment to control biofilm proliferation. As a proof-of-concept, the antimicrobial behavior of the silver-based 3D printed device is tested against environmental bacterial mixed communities via UV–vis spectroscopy and evaluating the absorbance change. Further tests, however, would be needed to reinforce the evidence of the bacteria behavior on the silver-patterned 3D printed devices

Diffusible repression of cytokinin signalling produces endodermal symmetry and passage cells.

In vascular plants, the root endodermis surrounds the central vasculature as a protective sheath that is analogous to the polarized epithelium in animals, and contains ring-shaped Casparian strips that restrict diffusion. After an initial lag phase, individual endodermal cells suberize in an apparently random fashion to produce 'patchy' suberization that eventually generates a zone of continuous suberin deposition. Casparian strips and suberin lamellae affect paracellular and transcellular transport, respectively. Most angiosperms maintain some isolated cells in an unsuberized state as so-called 'passage cells', which have previously been suggested to enable uptake across an otherwise-impermeable endodermal barrier. Here we demonstrate that these passage cells are late emanations of a meristematic patterning process that reads out the underlying non-radial symmetry of the vasculature. This process is mediated by the non-cell-autonomous repression of cytokinin signalling in the root meristem, and leads to distinct phloem- and xylem-pole-associated endodermal cells. The latter cells can resist abscisic acid-dependent suberization to produce passage cells. Our data further demonstrate that, during meristematic patterning, xylem-pole-associated endodermal cells can dynamically alter passage-cell numbers in response to nutrient status, and that passage cells express transporters and locally affect the expression of transporters in adjacent cortical cells

A Recent Class of Chemosensory Neurons Developed in Mouse and Rat

In most animal species, the vomeronasal organ ensures the individual recognition of conspecifics, a prerequisite for a successful reproduction. The vomeronasal organ expresses several receptors for pheromone detection. Mouse vomeronasal type-2 receptors (V2Rs) are restricted to the basal neurons of this organ and organized in four families. Family-A, B and D (family ABD) V2Rs are expressed monogenically (one receptor per neuron) and coexpress with either Vmn2r1 or Vmn2r2, two members of family-C V2Rs. Thus, basal neurons are characterized by specific combinations of two V2Rs. To investigate this issue, we raised antibodies against all family-C V2Rs and analyzed their expression pattern. We found that six out of seven family-C V2Rs (Vmn2r2-7) largely coexpressed and that none of the anti-Vmn2r2-7 antibodies significantly stained Vmn2r1 positive neurons. Thus, basal neurons are divided into two complementary subsets. The first subset (Vmn2r1-positive) preferentially coexpresses a distinct group of family-ABD V2Rs, whereas the second subset (Vmn2r2-7-positive) coexpresses the remaining group of V2Rs. Phylogenetic reconstruction and the analysis of genetic loci in various species reveal that receptors expressed by this second neuronal subset are recent branches of the V2R tree exclusively present in mouse and rat. Conversely, V2Rs expressed in Vmn2r1 positive neurons, are phylogenetically ancient and found in most vertebrates including rodents. Noticeably, the more recent neuronal subset expresses a type of Major Histocompatibility Complex genes only found in murine species. These results indicate that the expansion of the V2R repertoire in a murine ancestor occurred with the establishment of a new population of vomeronasal neurons in which coexists the polygenic expression of a recent group of family-C V2Rs (Vmn2r2-7) and the monogenic expression of a recent group of family-ABD V2Rs. This evolutionary innovation could provide a molecular rationale for the exquisite ability in individual recognition and mate choice of murine species