Fault rheology in an aseismic fold-thrust belt (Shahdad, eastern Iran)

Geodetic observations of aseismic deformation in a thrust belt near Shahdad in eastern Iran have been used to place constraints on the rheology of creeping faults in a thin-skinned thrust belt (\textless5 km thickness). Creep on shallow and high-angle thrust ramps at the range front occurs at a steady rate, in response to the topographic gradient across the thrust belt. Parts of these thrust ramps, and the low-angle basal thrust they connect to at depth in a ramp-and-flat geometry, underwent accelerated creep following the nearby Mw 6.6 Fandoqa earthquake in 1998. Estimates of the rate of fault slip and the driving stresses in these two contrasting times reveal a nonlinear relationship between the stresses and sliding velocity. The degree of nonlinearity rules out bulk shear of a weak layer in the sedimentary section (e.g., evaporites) as the deformation mechanism. Instead, we suggest that the motions are accommodated by slip on faults governed by a friction law with a highly nonlinear relationship between shear stress and slip rate (e.g., as predicted by �rate and state� models). The high-angle thrust ramps are responsible for building aspects of the geological and geomorphological signs of active shortening visible at the surface, but the folding preserved in the geology must be accomplished by other methods, possibly during the rapid transient postseismic deformation following nearby earthquakes

The north cycladic detachment system and associated mineralization, Mykonos, Greece: Insights on the evolution of the Aegean domain

International audienceIn the Aegean back-arc domain, some 30-35 Ma ago, an increase of the rate of slab retreat led to the initiation of post-orogenic extension, largely accommodated by large-scale structures such as the North Cycladic Detachment System (NCDS). Although this extension is still active nowadays, an E-W compressional regime developed in the Late Miocene with the propagation of the North Anatolian Fault. On Mykonos island (Cyclades), the NE-SW back-arc extension is particularly well expressed with the Livada and Mykonos detachments that belong to the NCDS and that are associated with NW-SE barite veins emplaced during the synkinematic cooling of the Mykonos intrusion. This study shows that the formation of the mineralization occurred when the pluton crossed the ductile-to-brittle transition during its exhumation below the NCDS at ~11-10 Ma. In addition, the kinematics of mineralized structures evolved with time: (1) most of the displacement was accommodated by the top-to-the-NE Livada and Mykonos detachments accompanied by the formation of mineralized normal faults that were (2) reworked in a strike-slip regime with an E-W direction of shortening and a persistent NE-SW stretching and (3) a latepost-mineralization E-W compressional stage with a minor reworking of shallow-dipping faults (locally including the detachments themselves). We interpret this increase of the E-W shortening component recorded during the mineraldeposition as a consequence of the initiation of the westward motion of Anatolia from 10 Ma, thus 4 Ma before the propagation of the North Anatolian Fault in the Dardanelles Strait and the localization of the strain on the Aegean Sea margins

Improving InSAR geodesy using global atmospheric models

Spatial and temporal variations of pressure, temperature and water vapor content in the atmosphere introduce significant confounding delays in Interferometric Synthetic Aperture Radar (InSAR) observations of ground deformation and bias estimatesof regional strain rates. Producing robust estimates of tropospheric delays remains one of the key challenges in increasing the accuracy of ground deformation measurements using InSAR. Recent studies revealed the efficiency of global atmospheric reanalysis to mitigate the impact of tropospheric delays, motivating further exploration of their potential. Here, we explore the effectiveness of these models in several geographic and tectonic settings on both single interferograms and time series analysis products. Both hydrostatic and wet contributions to the phase delay are important to account for. We validate these path delay corrections by comparing with estimates of vertically integrated atmospheric water vapor content derived from the passive multi-spectral imager MERIS, onboard the ENVISAT satellite. Generally, the performance of the prediction depends on the vigor of atmospheric turbulence. We discuss (1) how separating atmospheric and orbital contributions allows one to better measure long wavelength deformation, (2) how atmospheric delays affect measurements of surface deformation following earthquakes and (3) we show that such a method allows us to reduce biases in multi-year strain rate estimates by reducing the influence of unevenly sampled seasonal oscillations of the tropospheric delay

From ductile to brittle, late- to post-orogenic evolution of the Betic Cordillera: Structural insights from the northeastern Internal zones

International audienceRelations between Alpine detachment-bounded metamorphic domes, crustal-scale strike-slip fault zones and sedimentary basins in the Internal zones of the Betic cordillera are still matter of debate. Current tectonic interpretations of these basins vary from late-orogenic extensional structures to compressional ones associated with strike-slip motions along major still active faults. Structural investigations including new field mapping, meso-scale faults recognition, palaeostress analysis of brittle small-scale faults systems were performed in the sedimentary cover of the Almanzora corridor and the Huércal-Overa basins, located either in the hanging wall unit of the Filabres extensional shear zone or at the termination of the Alhama de Murcia sinistral fault zone. In parallel, a detailed study of the ductile and the ductile-brittle deformation was carried out in the footwall unit of the Filabres extensional shear zone, in the Nevado-Fílabride complex. Three main brittle events were recognised in the basin cover including two extensional events that occurred prior to a weak tectonic inversion of the basin during a third, still active event. The first one, D1b is characterized by the development a first stress regime consistent with ~NW-SE extensional tectonics. Besides, the consistency between the latest ductile and the brittle kinematics for the Filabres extensional shear zone and the activity of meso-scale fault systems that primarily control the main SW-NE depocentres allow concluding to a top-to-the-NW continuum of strain during the final exhumation of the Nevado-Filábride complex. The resulting overall half-graben architecture of the basins is then related to the combination of the formation of the metamorphic domes that added a local control superimposed on the regional deformation. Indeed, after a consistent top-to-the-west shearing prevailing during most of the Nevado-Filábride exhumation, final exhumation stages were in turn, characterised by important kinematics changes with a subordinate top-to-the-NW sense of shear (D1b). The onset of sedimentation in the basins occurred shortly after the crossing of the ductile-brittle transition in the underlying metamorphic domes at ca. 14 Ma into SW-NE fault-bounded troughs. Tectonic subsidence was then maintained during D2b while extensional kinematics changed to N-S or even locally to SSW-NNE. Extensional tectonics then lasted most of the Tortonian during the final tectonic denudation increments of the Sierra de los Filabres achieved at ca. 9-8 Ma. Intramontane basins are therefore genuinely extensional and clearly related to the latest exhumation stages of the Nevado-Filábride complex in the back-arc domain. Conversely, at ca. 8 Ma, basins started to record a ~N-S to NNW-SSE compressional stress regime (D3b) and ceased to be active depocentres while shortening within the Internal zones then recorded only the Iberia/Africa convergence. The weak inversion of the basins however resulted either in the reactivation of originally extensional faults such as the Alhama de Murcia fault or the basin individualisation and a progressive water exchange reduction with the Atlantic ocean and is thus proposed to be directly responsible for the Late Miocene salinity crises

Untargeted Metabolomics Approach Reveals Diverse Responses of Pastinaca Sativa to Ozone and Wounding Stresses

Stresses such as wounding or atmospheric pollutant exposure have a significant impact on plant fitness.Since it has been widely described that the metabolome directly reflects plant physiological status, a way to assess this impact is to perform a global metabolomic analysis. In this study, we investigated the effect of two abiotic stresses (mechanical wounding and ozone exposure) on parsnip metabolic balance using a liquid chromatography-mass spectrometry-based untargeted metabolomic approach.For this purpose, parsnip leaves were submitted to an acute ozone exposure or were mechanically wounded and sampled 24, 48, and 72 h post-treatment. Multivariate and univariate statistical analyses highlighted numerous differentially-accumulated metabolic features as a function of time and treatment. Mechanical wounding led to a more differentiated response than ozone exposure.We found that the levels of coumarins and fatty acyls increased in wounded leaves, while flavonoid concentration decreased in the same conditions. These results provide an overview of metabolic destabilization through differentially-accumulated compounds and provide a better understanding of global plant metabolic changes in defense mechanisms

Systematic InSAR tropospheric phase delay corrections from global meteorological reanalysis data

6p.International audienceDespite remarkable successes achieved by Differential InSAR, estimations of low tectonic strain rates remain challenging in areas where deformation and topography are correlated, mainly because of the topography‐related atmospheric phase screen (APS). In areas of high relief, empirical removal of the stratified component of the APS may lead to biased estimations of tectonic deformation rates. Here we describe a method to correct interferograms from the effects of the spatial and temporal variations in tropospheric stratification by computing tropospheric delay maps coincident with SAR acquisitions using the ERA‐ Interim global meteorological model. The modeled phase delay is integrated along vertical profiles at the ERA‐I grid nodes and interpolated at the spatial sampling of the interferograms above the elevation of each image pixel. This approach is validated on unwrapped interferograms. We show that the removal of the atmospheric signal before phase unwrapping reduces the risk of unwrapping errors in areas of rough topography

Autonomous Extraction of Millimeter-scale Deformation in InSAR Time Series Using Deep Learning

Systematic characterization of slip behaviours on active faults is key to unraveling the physics of tectonic faulting and the interplay between slow and fast earthquakes. Interferometric Synthetic Aperture Radar (InSAR), by enabling measurement of ground deformation at a global scale every few days, may hold the key to those interactions. However, atmospheric propagation delays often exceed ground deformation of interest despite state-of-the art processing, and thus InSAR analysis requires expert interpretation and a priori knowledge of fault systems, precluding global investigations of deformation dynamics. Here we show that a deep auto-encoder architecture tailored to untangle ground deformation from noise in InSAR time series autonomously extracts deformation signals, without prior knowledge of a fault's location or slip behaviour. Applied to InSAR data over the North Anatolian Fault, our method reaches 2 mm detection, revealing a slow earthquake twice as extensive as previously recognized. We further explore the generalization of our approach to inflation/deflation-induced deformation, applying the same methodology to the geothermal field of Coso, California

Monitoring of Tectonic Deformation by Mining Satellite Image Time Series

National audienceCet article présente une nouvelle approche pour l'analyse de séries d'images satellite InSAR (Interferometric Synthetic Aperture Radar) et son application au monitoring de fluage le long d'une faille sismique active majeure. Les données InSAR permettent de mesurer les déformations du sol entre deux dates sur de grandes zones géographiques, mais la précision des mesures reste limitée par le bruit du aux variations en temps et en espace des conditions atmosphériques. L'approche proposée combine des techniques d'analyse d'images satellite et des techniques de fouille de données. Elle permet de traiter des séries d'images satellite InSAR de façon non supervisée, même avec des conditions atmosphériques variables, et fournit aux experts des cartes d'évolutions décrivant les déformations du sol. Des résultats expérimentaux sur une série d'images ENVISAT de la faille de Haiyuan (zone Nord-Est du plateau tibétain) sont présentés. Les cartes obtenues montrent un glissement asismique continu superficiel le long d'une portion de la faille, ce qui est consistant avec les modèles géophysiques actuels