8 research outputs found
Investigation on 2 μm laser sources based on monoclinic crystals
Cette thèse est consacrée à l’étude du potentiel des cristaux biaxes dans le but de réaliser un laser de puissance. Les cristaux biaxes possèdent deux axes optiques ce qui donnent lieu à un effet appelé "réfraction (ou diffraction) conique". Cet effet, connu depuis 1832, est intensé- ment étudié depuis une décennie. Les progrès en croissance et découpe cristalline permettent d’obtenir des échantillons de longueurs et de qualités optiques suffisantes pour observer ce phénomène. L’utilisation de cet effet en cavité laser ayant déjà été réalisée [79, 78], l’objectif de cette thèse fut dans un premier temps de confirmer ces résultats. Ainsi, un système utilisant des cristaux de KGd(WO4)2 (KGW) dopés au Néodyme a été préalablement testé. Ces premiers résultats furent décevants. La stabilité, la qualité de faisceau ainsi que l’efficacité étaient plus que mé- diocres. L’efficacité maximale fut d’environ 40 % contre 74 % dans la publication [77]. Par ailleurs, le faisceau de sortie présentait un profil elliptique indiquant la présence d’une lentille thermique avec un fort astigmatisme. Ainsi, cette orientation, qui devrait être proche d’une direction athermale (ne présentant pas d’astigmatisme d’origine thermique) selon Biswal [10], ne l’est pas dans une cavité laser pour ce cristal. De plus ce laser est très peu stable et difficile à aligner. Les fluctuations importantes de l’efficacité de celui-ci ont abouti à une interrogation quant à la dépendance des propriétés optiques aux alentours de l’axe optique. Ainsi, dans les premiers chapitres de cette thèse, figurent une étude détaillée des principales propriétés optiques d’absorption et d’émission. Les ré- sultats de cette étude montrent que ces propriétés varient non seulement suivant la polarisation mais également suivant l’orientation aux alentours de l’axe optique. Etant donné que l’état de polarisation autour de l’axe optique varie avec l’orientation, les dépendances en orientation et polarisation sont liées. [...] Enfin, un montage innovant a été testé afin d’utiliser la réfraction conique. La puissance de sortie ainsi que l’efficacité de ce montage étaient très faibles, environ 800 mW en sortie pour 4 W de puissance de pompe.This thesis is devoted to the study on the potential of biaxial crystals in order to increase laser output power. Biaxial crystals have two optic axes and an effect called conical refraction (or diffraction) can occur. This effect is known since 1832, and intensively studied since the last decade. Thanks to the progress of crystal growth and crystal cutting, it is possible to have long samples of good optical quality in order to ob serve the conical refraction. This effect has already been used in a laser cavity [79, 78]. The aim of this thesis was to confirm the results previously obtained. Thus, Neodymium-doped KGd(WO4)2 (KGW) crystals, cut along the optic axis, have been tested. These first results were disappointing. Stability, beam quality and efficiency were very low. The maximum efficiency achieved was arount 40% compared to the 74% claimed in publication [77]. Thus, this orientation which should be an athermal direction using the calculation of Biswal [10] shows astigmatism when there is a temperature gradient. Furthermore, this laser being difficult to align with strong intensity fluctuations, rise interrogations about the optical property variations around the optic axis. Thus, in the first Chapters of this thesis a study of those properties around the optic axis is given. It shows a strong variation of the optical properties depending on the polarization and orientation around the optic axis. The study of the refraction along the optic axis helps to understand this complex dependency with the orientation. In a second time, holmium-doped KY(WO4)2 (KYW) crystals have been tested for laser emission at 2 µm. The choice of this ion has been done on several criteria. The first one is that the ISL laboratory is used to work with this wavelength and has a lot of equipment. The second one is that Holmium ions have a small "quantum defect" (pump wavelength 1960 nm and lasing wavelength 2074 nm). This low "quantum defect" limits the dispersion between the pump and lasing wavelengths. This decreases the separation between the optic axes of both wavelengths. Thus, when the pump is aligned for conical refraction the lasing wavelength is also aligned along the optic axis. Thanks to a better setup (with new mechanical parts) the polarization and orientation dependencies of the laser efficiency have been investigated. Up to 3 W of output power with a slope efficiency of 70% has been reached near the optic axis. The doping concentration of the Holmium-doped KY(WO4)2 (KYW) being more appropriated for high power laser, no thermal lens effect has been observed. Furthermore, the first conical refraction laser with a quasi-three-level system has been realized. An efficiency of 50% has been achieved with such a conical refraction laser. Finally, a new innovative setup is proposed using the External Conical Refraction. An output power of 800 mW for 4 W of incident pump power has been reached
Investigation on 2 μm laser sources based on monoclinic crystals
Cette thèse est consacrée à l’étude du potentiel des cristaux biaxes dans le but de réaliser un laser de puissance. Les cristaux biaxes possèdent deux axes optiques ce qui donnent lieu à un effet appelé "réfraction (ou diffraction) conique". Cet effet, connu depuis 1832, est intensé- ment étudié depuis une décennie. Les progrès en croissance et découpe cristalline permettent d’obtenir des échantillons de longueurs et de qualités optiques suffisantes pour observer ce phénomène. L’utilisation de cet effet en cavité laser ayant déjà été réalisée [79, 78], l’objectif de cette thèse fut dans un premier temps de confirmer ces résultats. Ainsi, un système utilisant des cristaux de KGd(WO4)2 (KGW) dopés au Néodyme a été préalablement testé. Ces premiers résultats furent décevants. La stabilité, la qualité de faisceau ainsi que l’efficacité étaient plus que mé- diocres. L’efficacité maximale fut d’environ 40 % contre 74 % dans la publication [77]. Par ailleurs, le faisceau de sortie présentait un profil elliptique indiquant la présence d’une lentille thermique avec un fort astigmatisme. Ainsi, cette orientation, qui devrait être proche d’une direction athermale (ne présentant pas d’astigmatisme d’origine thermique) selon Biswal [10], ne l’est pas dans une cavité laser pour ce cristal. De plus ce laser est très peu stable et difficile à aligner. Les fluctuations importantes de l’efficacité de celui-ci ont abouti à une interrogation quant à la dépendance des propriétés optiques aux alentours de l’axe optique. Ainsi, dans les premiers chapitres de cette thèse, figurent une étude détaillée des principales propriétés optiques d’absorption et d’émission. Les ré- sultats de cette étude montrent que ces propriétés varient non seulement suivant la polarisation mais également suivant l’orientation aux alentours de l’axe optique. Etant donné que l’état de polarisation autour de l’axe optique varie avec l’orientation, les dépendances en orientation et polarisation sont liées. [...] Enfin, un montage innovant a été testé afin d’utiliser la réfraction conique. La puissance de sortie ainsi que l’efficacité de ce montage étaient très faibles, environ 800 mW en sortie pour 4 W de puissance de pompe.This thesis is devoted to the study on the potential of biaxial crystals in order to increase laser output power. Biaxial crystals have two optic axes and an effect called conical refraction (or diffraction) can occur. This effect is known since 1832, and intensively studied since the last decade. Thanks to the progress of crystal growth and crystal cutting, it is possible to have long samples of good optical quality in order to ob serve the conical refraction. This effect has already been used in a laser cavity [79, 78]. The aim of this thesis was to confirm the results previously obtained. Thus, Neodymium-doped KGd(WO4)2 (KGW) crystals, cut along the optic axis, have been tested. These first results were disappointing. Stability, beam quality and efficiency were very low. The maximum efficiency achieved was arount 40% compared to the 74% claimed in publication [77]. Thus, this orientation which should be an athermal direction using the calculation of Biswal [10] shows astigmatism when there is a temperature gradient. Furthermore, this laser being difficult to align with strong intensity fluctuations, rise interrogations about the optical property variations around the optic axis. Thus, in the first Chapters of this thesis a study of those properties around the optic axis is given. It shows a strong variation of the optical properties depending on the polarization and orientation around the optic axis. The study of the refraction along the optic axis helps to understand this complex dependency with the orientation. In a second time, holmium-doped KY(WO4)2 (KYW) crystals have been tested for laser emission at 2 µm. The choice of this ion has been done on several criteria. The first one is that the ISL laboratory is used to work with this wavelength and has a lot of equipment. The second one is that Holmium ions have a small "quantum defect" (pump wavelength 1960 nm and lasing wavelength 2074 nm). This low "quantum defect" limits the dispersion between the pump and lasing wavelengths. This decreases the separation between the optic axes of both wavelengths. Thus, when the pump is aligned for conical refraction the lasing wavelength is also aligned along the optic axis. Thanks to a better setup (with new mechanical parts) the polarization and orientation dependencies of the laser efficiency have been investigated. Up to 3 W of output power with a slope efficiency of 70% has been reached near the optic axis. The doping concentration of the Holmium-doped KY(WO4)2 (KYW) being more appropriated for high power laser, no thermal lens effect has been observed. Furthermore, the first conical refraction laser with a quasi-three-level system has been realized. An efficiency of 50% has been achieved with such a conical refraction laser. Finally, a new innovative setup is proposed using the External Conical Refraction. An output power of 800 mW for 4 W of incident pump power has been reached
Investigation sur des sources lasers émettant à 2 μm utilisant des cristaux monocliniques
This thesis is devoted to the study on the potential of biaxial crystals in order to increase laser output power. Biaxial crystals have two optic axes and an effect called conical refraction (or diffraction) can occur. This effect is known since 1832, and intensively studied since the last decade. Thanks to the progress of crystal growth and crystal cutting, it is possible to have long samples of good optical quality in order to ob serve the conical refraction. This effect has already been used in a laser cavity [79, 78]. The aim of this thesis was to confirm the results previously obtained. Thus, Neodymium-doped KGd(WO4)2 (KGW) crystals, cut along the optic axis, have been tested. These first results were disappointing. Stability, beam quality and efficiency were very low. The maximum efficiency achieved was arount 40% compared to the 74% claimed in publication [77]. Thus, this orientation which should be an athermal direction using the calculation of Biswal [10] shows astigmatism when there is a temperature gradient. Furthermore, this laser being difficult to align with strong intensity fluctuations, rise interrogations about the optical property variations around the optic axis. Thus, in the first Chapters of this thesis a study of those properties around the optic axis is given. It shows a strong variation of the optical properties depending on the polarization and orientation around the optic axis. The study of the refraction along the optic axis helps to understand this complex dependency with the orientation. In a second time, holmium-doped KY(WO4)2 (KYW) crystals have been tested for laser emission at 2 µm. The choice of this ion has been done on several criteria. The first one is that the ISL laboratory is used to work with this wavelength and has a lot of equipment. The second one is that Holmium ions have a small "quantum defect" (pump wavelength 1960 nm and lasing wavelength 2074 nm). This low "quantum defect" limits the dispersion between the pump and lasing wavelengths. This decreases the separation between the optic axes of both wavelengths. Thus, when the pump is aligned for conical refraction the lasing wavelength is also aligned along the optic axis. Thanks to a better setup (with new mechanical parts) the polarization and orientation dependencies of the laser efficiency have been investigated. Up to 3 W of output power with a slope efficiency of 70% has been reached near the optic axis. The doping concentration of the Holmium-doped KY(WO4)2 (KYW) being more appropriated for high power laser, no thermal lens effect has been observed. Furthermore, the first conical refraction laser with a quasi-three-level system has been realized. An efficiency of 50% has been achieved with such a conical refraction laser. Finally, a new innovative setup is proposed using the External Conical Refraction. An output power of 800 mW for 4 W of incident pump power has been reached.Cette thèse est consacrée à l’étude du potentiel des cristaux biaxes dans le but de réaliser un laser de puissance. Les cristaux biaxes possèdent deux axes optiques ce qui donnent lieu à un effet appelé "réfraction (ou diffraction) conique". Cet effet, connu depuis 1832, est intensé- ment étudié depuis une décennie. Les progrès en croissance et découpe cristalline permettent d’obtenir des échantillons de longueurs et de qualités optiques suffisantes pour observer ce phénomène. L’utilisation de cet effet en cavité laser ayant déjà été réalisée [79, 78], l’objectif de cette thèse fut dans un premier temps de confirmer ces résultats. Ainsi, un système utilisant des cristaux de KGd(WO4)2 (KGW) dopés au Néodyme a été préalablement testé. Ces premiers résultats furent décevants. La stabilité, la qualité de faisceau ainsi que l’efficacité étaient plus que mé- diocres. L’efficacité maximale fut d’environ 40 % contre 74 % dans la publication [77]. Par ailleurs, le faisceau de sortie présentait un profil elliptique indiquant la présence d’une lentille thermique avec un fort astigmatisme. Ainsi, cette orientation, qui devrait être proche d’une direction athermale (ne présentant pas d’astigmatisme d’origine thermique) selon Biswal [10], ne l’est pas dans une cavité laser pour ce cristal. De plus ce laser est très peu stable et difficile à aligner. Les fluctuations importantes de l’efficacité de celui-ci ont abouti à une interrogation quant à la dépendance des propriétés optiques aux alentours de l’axe optique. Ainsi, dans les premiers chapitres de cette thèse, figurent une étude détaillée des principales propriétés optiques d’absorption et d’émission. Les ré- sultats de cette étude montrent que ces propriétés varient non seulement suivant la polarisation mais également suivant l’orientation aux alentours de l’axe optique. Etant donné que l’état de polarisation autour de l’axe optique varie avec l’orientation, les dépendances en orientation et polarisation sont liées. [...] Enfin, un montage innovant a été testé afin d’utiliser la réfraction conique. La puissance de sortie ainsi que l’efficacité de ce montage étaient très faibles, environ 800 mW en sortie pour 4 W de puissance de pompe
Laser action along and near the optic axis of a holmium-doped KY(WO 4 ) 2 crystal
International audienceWe demonstrate the first (to our knowledge) quasi-three-level conical refraction laser operating at 2 μm, with 1.6 W of output power at 2074 nm, using a holmium-doped KY…WO 4 † 2 crystal. A maximum slope efficiency of 52% has been achieved, along the optic axis with respect to the absorbed pump power. Furthermore, lasing operation around the optic axis has been performed. In this case, a maximum output power of 3 W has been reached, with a slope efficiency better than 70%, which are the best performances ever reported on this material. Studies of conical refraction (CR) have recently revived. When a Gaussian light beam propagates along the optic axis of a biaxial crystal, under certain conditions a two ring-shaped beam can be observed, at the exit face of the crystal. Several publications describe this effect, theo-retically and experimentally [1–4]. Recent availability of long biaxial crystals, with good optical quality, facili-tates CR studies. Therefore, several applications of this effect have recently been investigated, such as optical tweezers [5], particle trapping [6], beam shaping [7–11], and microscopy [12]. There are also some publications about laser operation along an optic axis of a biaxial crys-tal, the first publication being [13]. Using a short (3 mm long) biaxial crystal of a CR-cut ytterbium-doped KGd…WO 4 † 2 (KGW), the output polarization of their laser was modified, by translating the output coupler mirror. The researchers obtained a slope efficiency of 60% along the CR axis, which is similar to the value obtained for a classical N g -cut orientation. However, the threshold was 2× higher for CR orientation. A few years later, [14,15] presented a four-level conical refraction laser, made with neodymium-doped KGW. The researchers obtained both a Gaussian and CR output beam. They reported a slope efficiency close to the quantum defect limit [14], and no influence of any thermal effect over the measurement range (up to 3 W at 1067 nm) was observed. The thermo-optic properties of neodymium-doped KGW were studied in [16]. The researchers show the anisotropy of the thermo-optic properties, along this propagation direc-tion with a short crystal (1 mm long). However, the effect of CR inside the cavity, changing the light distribution in-side the crystal, is still not well-known. In this Letter, we report the first experimental results (to our knowledge) of a holmium-doped KY…WO 4 † 2 (KYW) CR laser, showing laser action along the CR axis. Measurements near the optic axis have also been per-formed, in order to be able to compare CR and Gaussian beam intracavity laser performance
Wavelength dependence of the orientation of optic axes in KGW
We report on the wavelength dependence of the orientation of the optic axes in monoclinic crystals using undoped and neodymium-doped KGd(WO4)2 (KGW) samples. Measurements have been performed over a wide wavelength range from 420 up to 1,580 nm with more than 70 measurement points. This provides the widest measurement range of the optic axis variation ever reported in literature for KGW crystals. With such a measurement, which can be performed in principle in all biaxial crystals, the refractive indices values can be checked with a precision down to 10−3
iPot: Improved potato monitoring in Belgium using remote sensing and crop growth modelling
Orientation and polarization dependence of both the absorption and the laser efficiency around the optic axis in monoclinic Ho3+ :KYW
We report on the absorption profile of the monoclinic holmium-doped KY(WO4)2 crystal near the optic axis for the maximal absorption wavelength at 1960 nm. The full angular distribution of the absorption coefficient at the vicinity of such optical singularity has been experimentally and numerically investigated. Furthermore, laser experiments along the optic axis have been carried out. So-called conical refraction laser and classical Gaussian laser operation are compared near the optic axis, taking into account the complex absorption profile.A complete solid solution between the anion-deficient pyrochlore Ag2Sb2O6 and the ideal pyrochlore Cd2Sb2O7 has been synthesized through the standard solid state ceramic method. Each composition has been characterized by various different techniques, including powder X-ray diffraction, optical spectroscopy, electron paramagnetic resonance and 121Sb Mössbauer spectroscopy. Computational methods based on density functional theory complement this investigation. Photocatalytic activity has been studied, and transport properties have been measured on pellets densified by spark plasma sintering. The analysis of the data collected from these various techniques enables a comprehensive characterization of the complete solid solution and revealed an anomalous behavior in the Cd-rich end of the solid solution, which has been proposed to arise from a possible radical O− species in small concentrations