The circular economy in corporate reporting: Text mining of energy companies’ management reports

This paper explores the implementation of the circular economy in the energy sector. The research findings contribute to our understanding of the practical application of the circular economy, enabling policymakers and stakeholders to make informed decisions and develop targeted strategies. The study analyzes 88 Portuguese companies’ reports, examining the presence of circular economy strategies and initiatives. The results reveal that energy sector companies tend to prioritize reporting their greenhouse gas reduction efforts over their circular economy strategies. The findings align with previous studies in the oil and gas industry, emphasizing the significance of sustainability reporting and potential biases in reporting practices. The study also identifies a gap between circular economy terminology and its representation in reports, indicating the need for greater incorporation of circular economy-oriented initiatives in the energy sector. The research highlights the role of technology in fostering innovation and calls for strategic alliances and knowledge sharing to drive circular economy practices. Further research is recommended to understand the barriers to implementing circular economy practices and identify effective solutions. Overall, this paper provides valuable insights for advancing the circular economy in the energy sector and achieving broader sustainability goals.info:eu-repo/semantics/publishedVersio

A low-noise CMOS front-end for TOF-PET

An analogue CMOS front-end for triggering and amplification of signals produced by a silicon photomultiplier (SiPM) coupled to a LYSO scintillator is proposed. The solution is intended for time-of-flight measurement in compact Positron Emission Tomography (TOF-PET) medical imaging equipments where excellent timing resolution is required (approximate to 100 ps). A CMOS 0.13 mu m technology was used to implement such front end, and the design includes preamplification, shaping, baseline holder and biasing circuitry, for a total silicon area of 500x90 mu m. Waveform sampling and time-over-threshold (ToT) techniques are under study and the front-end provides fast and shaped outputs for time and energy measurements. Post layout simulation results show that, for the trigger of a single photoelectron, the time jitter due to the pre-amplifier noise can be as low as 15 ps (FWHM), for a photodetector with a total capacitance of 70 pF. The very low input impedance of the pre-amplifier (approximate to 5 Omega) allows 1.8 ns of peaking time, at the cost of 10 mW of power consumption

Evidence for the evolutionary steps leading to mecA-mediated ß-lactam resistance in staphylococci

The epidemiologically most important mechanism of antibiotic resistance in Staphylococcus aureus is associated with mecA–an acquired gene encoding an extra penicillin-binding protein (PBP2a) with low affinity to virtually all β-lactams. The introduction of mecA into the S. aureus chromosome has led to the emergence of methicillin-resistant S. aureus (MRSA) pandemics, responsible for high rates of mortality worldwide. Nonetheless, little is known regarding the origin and evolution of mecA. Different mecA homologues have been identified in species belonging to the Staphylococcus sciuri group representing the most primitive staphylococci. In this study we aimed to identify evolutionary steps linking these mecA precursors to the β-lactam resistance gene mecA and the resistance phenotype. We sequenced genomes of 106 S. sciuri, S. vitulinus and S. fleurettii strains and determined their oxacillin susceptibility profiles. Single-nucleotide polymorphism (SNP) analysis of the core genome was performed to assess the genetic relatedness of the isolates. Phylogenetic analysis of the mecA gene homologues and promoters was achieved through nucleotide/amino acid sequence alignments and mutation rates were estimated using a Bayesian analysis. Furthermore, the predicted structure of mecA homologue-encoded PBPs of oxacillin-susceptible and -resistant strains were compared. We showed for the first time that oxacillin resistance in the S. sciuri group has emerged multiple times and by a variety of different mechanisms. Development of resistance occurred through several steps including structural diversification of the non-binding domain of native PBPs; changes in the promoters of mecA homologues; acquisition of SCCmec and adaptation of the bacterial genetic background. Moreover, our results suggest that it was exposure to β-lactams in human-created environments that has driven evolution of native PBPs towards a resistance determinant. The evolution of β-lactam resistance in staphylococci highlights the numerous resources available to bacteria to adapt to the selective pressure of antibiotics

A low-noise CMOS front-end for TOF-PET

An analogue CMOS front-end for triggering and amplification of signals produced by a silicon photomultiplier (SiPM) coupled to a LYSO scintillator is proposed. The solution is intended for time-of-flight measurement in compact Positron Emission Tomography (TOF-PET) medical imaging equipments where excellent timing resolution is required (approximate to 100 ps). A CMOS 0.13 mu m technology was used to implement such front end, and the design includes preamplification, shaping, baseline holder and biasing circuitry, for a total silicon area of 500x90 mu m. Waveform sampling and time-over-threshold (ToT) techniques are under study and the front-end provides fast and shaped outputs for time and energy measurements. Post layout simulation results show that, for the trigger of a single photoelectron, the time jitter due to the pre-amplifier noise can be as low as 15 ps (FWHM), for a photodetector with a total capacitance of 70 pF. The very low input impedance of the pre-amplifier (approximate to 5 Omega) allows 1.8 ns of peaking time, at the cost of 10 mW of power consumption

A low-noise CMOS front-end for TOF-PET

An analogue CMOS front-end for triggering and amplification of signals produced by a silicon photomultiplier (SiPM) coupled to a LYSO scintillator is proposed. The solution is intended for time-of-flight measurement in compact Positron Emission Tomography (TOF-PET) medical imaging equipments where excellent timing resolution is required (approximate to 100 ps). A CMOS 0.13 mu m technology was used to implement such front end, and the design includes preamplification, shaping, baseline holder and biasing circuitry, for a total silicon area of 500x90 mu m. Waveform sampling and time-over-threshold (ToT) techniques are under study and the front-end provides fast and shaped outputs for time and energy measurements. Post layout simulation results show that, for the trigger of a single photoelectron, the time jitter due to the pre-amplifier noise can be as low as 15 ps (FWHM), for a photodetector with a total capacitance of 70 pF. The very low input impedance of the pre-amplifier (approximate to 5 Omega) allows 1.8 ns of peaking time, at the cost of 10 mW of power consumption

A low-noise CMOS front-end for TOF-PET

An analogue CMOS front-end for triggering and amplification of signals produced by a silicon photomultiplier (SiPM) coupled to a LYSO scintillator is proposed. The solution is intended for time-of-flight measurement in compact Positron Emission Tomography (TOF-PET) medical imaging equipments where excellent timing resolution is required (approximate to 100 ps). A CMOS 0.13 mu m technology was used to implement such front end, and the design includes preamplification, shaping, baseline holder and biasing circuitry, for a total silicon area of 500x90 mu m. Waveform sampling and time-over-threshold (ToT) techniques are under study and the front-end provides fast and shaped outputs for time and energy measurements. Post layout simulation results show that, for the trigger of a single photoelectron, the time jitter due to the pre-amplifier noise can be as low as 15 ps (FWHM), for a photodetector with a total capacitance of 70 pF. The very low input impedance of the pre-amplifier (approximate to 5 Omega) allows 1.8 ns of peaking time, at the cost of 10 mW of power consumption

A model to explain angular distributions of J/ψJ/\psi and ψ(2S)\psi(2S) decays into ΛΛ‾\Lambda\overline{\Lambda} and Σ0Σ‾0\Sigma^0\overline{\Sigma}^0

BESIII data show a particular angular distribution for the decay of the $J/\psi$ and $\psi(2S)$ mesons into the hyperons $\Lambda\overline{\Lambda}$ and $\Sigma^0\overline{\Sigma}^0$. More in details the angular distribution of the decay $\psi(2S) \to \Sigma^0\overline{\Sigma}^0$ exhibits an opposite trend with respect to that of the other three channels: $J/\psi \to \Lambda\overline{\Lambda}$, $J/\psi \to \Sigma^0\overline{\Sigma}^0$ and $\psi(2S) \to \Lambda\overline{\Lambda}$. We define a model to explain the origin of this phenomenon.Comment: 6 pages, 7 figures, to be published in Chinese Physics

A Cylindrical GEM Inner Tracker for the BESIII experiment at IHEP

The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/{\psi} and {\psi}(2s). Due to the increase of the luminosity up to its nominal value of 10^33 cm-2 s-1 and aging effect, the MDC decreases its efficiency in the first layers up to 35% with respect to the value in 2014. Since BESIII has to take data up to 2022 with the chance to continue up to 2027, the Italian collaboration proposed to replace the inner part of the MDC with three independent layers of Cylindrical triple-GEM (CGEM). The CGEM-IT project will deploy several new features and innovation with respect the other current GEM based detector: the {\mu}TPC and analog readout, with time and charge measurements will allow to reach the 130 {\mu}m spatial resolution in 1 T magnetic field requested by the BESIII collaboration. In this proceeding, an update of the status of the project will be presented, with a particular focus on the results with planar and cylindrical prototypes with test beams data. These results are beyond the state of the art for GEM technology in magnetic field

Ferroelectric characterization of aligned barium titanate nanofibres

We report the synthesis, structural and ferroelectric characterization of continuous well-aligned nanofibres of barium titanate produced by the electrospinning technique. The fibres with average diameter of 150–400 nm consist of connected nanoparticles of BaTiO 3 stacked together to form the shape of a long filament. The tetragonal phase in the obtained nanofibres was revealed by the x-ray diffraction and Raman spectroscopy and has been also confirmed by the second harmonic generation (SHG) and piezoresponse force microscopy (PFM). The temperature dependence of the SHG in the vicinity of the paraelectric–ferroelectric phase transition suggests that barium titanate nanofibres are indeed ferroelectric with an apparent glass-like state caused by metastable polar nanoregions. The existence of domain structure and local switching studied by PFM present clear evidence of the polar phase at room temperature.Fundação para a Ciência e a Tecnologia (FCT

Ordered La0.7Sr0.3MnO3 nanohole arrays fabricated on a nanoporous alumina template by pulsed laser ablation

Highly ordered nanohole arrays of [Formula: see text] manganite have been synthesized using pulsed laser deposition on nanoporous alumina template. Their structure and phase formation were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive x-ray spectroscopy (EDX) and x-ray diffraction (XRD). The magnetic measurements were performed with respect to temperature and field and exhibit a ferromagnetic to paramagnetic transition at 284 K. In addition, the temperature dependence of electrical resistance was measured at different magnetic fields and an insulating phase throughout all the temperatures was observed. The low temperature ferromagnetic insulating state is discussed by the presence of a canted ferromagnetic state induced by the nanoholes. The present work shows the feasibility of combining both the nanoporous alumina template and pulsed laser ablation for the fabrication of perovskite manganite nanohole arrays which can also be extended to fabricate other multicomponent oxide nanohole materials.M K is thankful to FCT, Portugal for the Grant No. SFRH/ BPD/75110/2010. The authors acknowledged the financial supports from the projects NORTE-07–0124-FEDER000070, CERN/FIS-NUC/0004/2015 and IF/00686/2014