Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → μ+μ−)/B(Bs → μ+μ−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

LHCb upgrade software and computing : technical design report

This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis

Measurement of prompt D+D^+ and Ds+D^+_{s} production in pPbp\mathrm{Pb} collisions at sNN=5.02 \sqrt {s_{\mathrm{NN}}}=5.02\,TeV

The production of prompt $D^+$ and $D^+_{s}$ mesons is studied in proton-lead collisions at a centre-of-mass energy of $\sqrt {s_{\mathrm{NN}}}=5.02\,$TeV. The data sample corresponding to an integrated luminosity of $(1.58\pm0.02)\mathrm{nb}^{-1}$ is collected by the LHCb experiment at the LHC. The differential production cross-sections are measured using $D^+$ and $D^+_{s}$ candidates with transverse momentum in the range of $0<p_{\mathrm{T}} <14\,\mathrm{GeV}/c$ and rapidities in the ranges of $1.5<y^*<4.0$ and $-5.0<y^*<-2.5$ in the nucleon-nucleon centre-of-mass system. For both particles, the nuclear modification factor and the forward-backward production ratio are determined. These results are compared with theoretical models that include initial-state nuclear effects. In addition, measurements of the cross-section ratios between $D^+$, $D^+_{s}$ and $D^0$ mesons are presented, providing a baseline for studying the charm hadronization in lead-lead collisions at LHC energies.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2023-006.html (LHCb public pages

The LHCb upgrade I

The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software

Determination of short- and long-distance contributions in B0→K*0μ+μ− decays

An amplitude analysis of the B 0 → K * 0 μ + μ − decay is presented. The analysis is based on data collected by the LHCb experiment from proton-proton collisions at √ s = 7 , 8 and 13 TeV, corresponding to an integrated luminosity of 4.7     fb − 1 . For the first time, Wilson coefficients and nonlocal hadronic contributions are accessed directly from the unbinned data, where the latter are parametrized as a function of q 2 with a polynomial expansion. Wilson coefficients and nonlocal hadronic parameters are determined under two alternative hypotheses: the first relies on experimental information alone, while the second one includes information from theoretical predictions for the nonlocal contributions. Both models obtain similar results for the parameters of interest. The overall level of compatibility with the Standard Model is evaluated to be between 1.8 and 1.9 standard deviations when looking at the C 9 Wilson coefficient alone, and between 1.3 and 1.4 standard deviations when considering the full set of C 9 , C 10 , C ′ 9 and C ′ 10 Wilson coefficients. The ranges reflect the theoretical assumptions made in the analysis

Amplitude analysis of the Λ0b→pK−γ decay

The resonant structure of the radiative decay Λ0b→pK−γ in the region of proton-kaon invariant-mass up to 2.5 GeV/c2 is studied using proton-proton collision data recorded at centre-of-mass energies of 7, 8, and 13 TeV collected with the LHCb detector, corresponding to a total integrated luminosity of 9 fb−1. Results are given in terms of fit and interference fractions between the different components contributing to this final state. Only Λ resonances decaying to pK− are found to be relevant, where the largest contributions stem from the Λ(1520), Λ(1600), Λ(1800), and Λ(1890) states

Search for Bc+ → π+μ+μ- decays and measurement of the branching fraction ratio B(Bc+ → ψ (2S)π+) / B(Bc+ → J/ψπ+)

The first search for nonresonant Bc+ → π+μ+μ- decays is reported. The analysis uses proton–proton collision data collected with the LHCb detector between 2011 and 2018, corresponding to an integrated luminosity of 9fb-1. No evidence for an excess of signal events over background is observed and an upper limit is set on the branching fraction ratio B(Bc+→π+μ+μ-)/B(Bc+→J/ψπ+)&lt;2.1×10-4 at 90% confidence level. Additionally, an updated measurement of the ratio of the Bc+→ψ(2S)π+ and Bc+→J/ψπ+ branching fractions is reported. The ratio B(Bc+→ψ(2S)π+)/B(Bc+→J/ψπ+) is measured to be 0.254±0.018±0.003±0.005, where the first uncertainty is statistical, the second systematic, and the third is due to the uncertainties on the branching fractions of the leptonic J/ψ and ψ(2S) decays. This measurement is the most precise to date and is consistent with previous LHCb results

Measurement of prompt D+ and Ds+ production in pPb collisions at √sNN = 5. 02 TeV

The production of prompt D+ and D+s mesons is studied in proton-lead collisions at a centre-of-mass energy of √sNN = 5.02 TeV. The data sample corresponding to an integrated luminosity of (1.58 ± 0.02)nb−1 is collected by the LHCb experiment at the LHC. The differential production cross-sections are measured using D+ and D+s candidates with transverse momentum in the range of 0 &lt; pT &lt; 14 GeV/c and rapidities in the ranges of 1.5 &lt; y∗ &lt; 4.0 and –5.0 &lt; y∗ &lt; –2.5 in the nucleon-nucleon centre-of-mass system. For both particles, the nuclear modification factor and the forward-backward production ratio are determined. These results are compared with theoretical models that include initial-state nuclear effects. In addition, measurements of the cross-section ratios between D+, D+s and D0 mesons are presented, providing a baseline for studying the charm hadronization in lead-lead collisions at LHC energies

Observation of the Bc+ → J/ψπ+π0 decay

The first observation of the Bc+→J/ψπ+π0 decay is reported with high significance using proton-proton collision data, corresponding to an integrated luminosity of 9 fb−1, collected with the LHCb detector at centre-of-mass energies of 7, 8, and 13 TeV. The ratio of its branching fraction relative to the Bc+→J/ψπ+ channel is measured to beBBc+→J/ψπ+π0BBc+→J/ψπ+=2.80±0.15±0.11±0.16, where the first uncertainty is statistical, the second systematic and the third related to imprecise knowledge of the branching fractions for B+ → J/ψK*+ and Bc+→J/ψπ+ decays, which are used to determine the π0 detection efficiency. The π+π0 mass spectrum is found to be consistent with the dominance of an intermediate ρ+ contribution in accordance with a model based on QCD factorisation

Observation of Λ0b → Λ+cD¯(∗)0K− and Λ0b → Λ+cD∗−s decays

Abstract available from publisher's website