Biological waste gas treatment with a modified rotating biological contactor. ΙΙ. Effect of operating parameters on process performance and mathematical modeling

In the first part of this paper, we introduced a modified rotating biological contactor (RBC) for the biological treatment of waste gas, and demonstrated its feasibility by applying the process to the biodegradation of toluene in a 91-liter reactor containing 20 biofilm support discs with a diameter of 40cm [1]. We showed that the proposed system allows the unlimited growth of the biofilm to be suppressed, hence eliminating the risk of clogging associated with other biological waste gas treatment systems. Furthermore, we observed stationary long-term performance for more than one year under typical standard operating conditions. In this part of our work, we investigate experimentally the influence of the main process parameters, i.e., gas flow rate, inlet gas concentration, and rotational speed of the biofilm supports on process performance for the same system. Experimental results indicate that the modified RBC system is mass transfer limited for toluene loadings below 150g/m3h, whereas at higher inlet concentrations of the pollutant, it becomes limited by the biodegradation reaction inside the biofilm. Surprisingly, the disc rotational speed is found to have no major effect on process performance for the system under investigation. A time-independent mathematical model of the process is also presented, and predictions are compared with experimental degradation data. In the range of the investigation process parameters, good agreement between the experimental data and simulation results is obtaine

Biological waste gas treatment with a modified rotating biological contactor. Ι. Control of biofilm growth and long-term performance

In this work, we introduce a modified rotating biological contactor (RBC) system and demonstrate its feasibility by applying the newly devised process to the biological treatment of artificial waste gas. In the proposed system, the waste gas is introduced to the bioreactor in the spacings between the rotating discs through a hollow shaft, thus allowing for intimate gas-liquid contact. A 91-l modified RBC containing 20 biofilm support discs 40cm in diameter was used in the experiments. Toluene was used as the model pollutant, and the system was operated under standard operating conditions for more than one year in order to investigate its long-term performance and assess its ability to control the growth of the biofilm. It was demonstrated that the proposed system allows to efficiently control the growth of the biofilm, thus overcoming the clogging problem inherent in most conventional methods for the biological treatment of waste gas. Moreover, the system was shown to exhibit stationary long-term performance for a period of more than one year, hence indicating its feasibility for industrial applicatio

Variability of aliphatic glucosinolates in Arabidopsis thaliana (L.) – Impact on glucosinolate profile and insect resistance

The glucosinolate(GS)-myrosinase system of Brassicaceae, including the model plant Arabidopsis thaliana (L.), comprises a defence which is effective especially against generalist herbivores. Based on their side chain structure GS are grouped into aliphatic, aromatic, and indolyl GS. Indolyl GS are widely distributed among A. thaliana ecotypes and the Brassicaceae family, but the presence of aliphatic GS is variable and under strong genetic control. We investigated the effect of AOP gene expression on the side chain modifications of GS and the impact on insect resistance. AOP2 and AOP3 genes from Mr-0 and Sap-0 ecotypes, respectively, were crossbred into the methylsulfinyl GS producing Gie-0. Successful crosses were heterozygote plants which produced allyl (AOP2) or 3-hydroxypropyl GS (AOP3). After self-pollination, the chemical profile of the F3 generation of plants was screened to identify homozygote lines. Homozygote lines producing 3-hydroxypropyl GS were compared to methylsulfinyl GS, which were used to study the impact of GS structure on insect performance in first experiments. Our experiments revealed that methylsulfinyl GS containing ecotype lines were more resistant to the generalist caterpillar Spodoptera exigua (Hübner) and to the specialist caterpillar Pieris brassicae (L.) than the lines containing hydroxypropyl GS as main compounds

A steerable UV laser system for the calibration of liquid argon time projection chambers

A number of liquid argon time projection chambers (LAr TPC's) are being build or are proposed for neutrino experiments on long- and short baseline beams. For these detectors a distortion in the drift field due to geometrical or physics reasons can affect the reconstruction of the events. Depending on the TPC geometry and electric drift field intensity this distortion could be of the same magnitude as the drift field itself. Recently, we presented a method to calibrate the drift field and correct for these possible distortions. While straight cosmic ray muon tracks could be used for calibration, multiple coulomb scattering and momentum uncertainties allow only a limited resolution. A UV laser instead can create straight ionization tracks in liquid argon, and allows one to map the drift field along different paths in the TPC inner volume. Here we present a UV laser feed-through design with a steerable UV mirror immersed in liquid argon that can point the laser beam at many locations through the TPC. The straight ionization paths are sensitive to drift field distortions, a fit of these distortion to the linear optical path allows to extract the drift field, by using these laser tracks along the whole TPC volume one can obtain a 3D drift field map. The UV laser feed-through assembly is a prototype of the system that will be used for the MicroBooNE experiment at the Fermi National Accelerator Laboratory (FNAL)

Measurement of the drift field in the ARGONTUBE LAr TPC with 266~nm pulsed laser beams

ARGONTUBE is a liquid argon time projection chamber (LAr TPC) with a drift field generated in-situ by a Greinacher voltage multiplier circuit. We present results on the measurement of the drift-field distribution inside ARGONTUBE using straight ionization tracks generated by an intense UV laser beam. Our analysis is based on a simplified model of the charging of a multi-stage Greinacher circuit to describe the voltages on the field cage rings

A method to suppress dielectric breakdowns in liquid argon ionization detectors for cathode to ground distances of several millimeters

We present a method to reach electric field intensity as high as 400 kV/cm in liquid argon for cathode-ground distances of several millimeters. This can be achieved by suppressing field emission from the cathode, overcoming limitations that we reported earlier

On the Electric Breakdown in Liquid Argon at Centimeter Scale

We present a study on the dependence of electric breakdown discharge properties on electrode geometry and the breakdown field in liquid argon near its boiling point. The measurements were performed with a spherical cathode and a planar anode at distances ranging from 0.1 mm to 10.0 mm. A detailed study of the time evolution of the breakdown volt-ampere characteristics was performed for the first time. It revealed a slow streamer development phase in the discharge. The results of a spectroscopic study of the visible light emission of the breakdowns complement the measurements. The light emission from the initial phase of the discharge is attributed to electro-luminescence of liquid argon following a current of drifting electrons. These results contribute to set benchmarks for breakdown-safe design of ionization detectors, such as Liquid Argon Time Projection Chambers (LAr TPC).Comment: Minor revision according to editor report. 17 pages, 15 figures, 2 tables. Turboencabulato