Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. METHODS: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. RESULTS: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. CONCLUSIONS: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures.Avaliação fotográfica para observar a presença ou a ausência de bolhas nos selantes de fóssula e fissuras Concise e Prisma Shield aos 7 dias, 18 meses, 36 meses e 11 anos, após a realização dos selamentos. METODOLOGIA: Foi aplicado na superfície oclusal, em todos os períodos de análise, uma solução corante a base de hematoxilina, que possibilitou a verificação e a avaliação dos materiais seladores presentes nesta superfície. Todas as superfícies oclusais foram fotografadas e as fotografias, correspondentes a cada período em análise, foram submetidas à avaliação fotográfica. RESULTADOS: Verificou-se diferença estatisticamente significativa somente aos 18 meses de análise, com o selante Prisma Shield apresentando um número significativamente maior de bolhas superficiais, que o selante Concise; enquanto que os demais grupos apresentaram-se estatisticamente semelhantes entre si, em todos os outros períodos de análise. Por outro lado, quando os selantes foram analisados isoladamente, nos períodos subseqüentes, não foi observada a presença de diferença estatisticamente significativa. CONCLUSÃO: De acordo com os resultados observados, pudemos verificar que os materiais seladores apresentaram o aparecimento e o desaparecimento de bolhas, fato que não interferiu na finalidade clínica do selamento realizado

Observação fotográfica da ocorrência de bolhas em selantes de fóssulas e fissuras

The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. METHODS: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. RESULTS: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. CONCLUSIONS: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures.Avaliação fotográfica para observar a presença ou a ausência de bolhas nos selantes de fóssula e fissuras Concise e Prisma Shield aos 7 dias, 18 meses, 36 meses e 11 anos, após a realização dos selamentos. METODOLOGIA: Foi aplicado na superfície oclusal, em todos os períodos de análise, uma solução corante a base de hematoxilina, que possibilitou a verificação e a avaliação dos materiais seladores presentes nesta superfície. Todas as superfícies oclusais foram fotografadas e as fotografias, correspondentes a cada período em análise, foram submetidas à avaliação fotográfica. RESULTADOS: Verificou-se diferença estatisticamente significativa somente aos 18 meses de análise, com o selante Prisma Shield apresentando um número significativamente maior de bolhas superficiais, que o selante Concise; enquanto que os demais grupos apresentaram-se estatisticamente semelhantes entre si, em todos os outros períodos de análise. Por outro lado, quando os selantes foram analisados isoladamente, nos períodos subseqüentes, não foi observada a presença de diferença estatisticamente significativa. CONCLUSÃO: De acordo com os resultados observados, pudemos verificar que os materiais seladores apresentaram o aparecimento e o desaparecimento de bolhas, fato que não interferiu na finalidade clínica do selamento realizado.2732Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

The influence of temperature of three adhesive systems on bonding to ground enamel

Orientador: Jose Roberto LovadinoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de PiracicabaResumo: O objetivo deste estudo foi avaliar a influência da temperatura do adesivo na resistência à microtração (µT) de um convencional de frasco único, Primer &Bond NT(PBNT) e dois adesivos autocondicionante,Clearfil SE Bond (SEB) e Adper Prompt L-Pop (PLP). Adicionalmente, foram analisados o padrão de condicionamento (PC) e a interface resina-esmalte (IRE). Foram utilizados 63 dentes bovinos divididos em 3 grupos (n=21) de acordo com o adesivo. Cada grupo foi subdividido em 3 sub-grupos de acordo com a temperatura do adesivo (NORM = 20°C; FRIO = 5°C; QNT = 40°C). Os dentes tiveram sua face vestibular média planificada com lixas de granulação 320, 400 e 600 de SiC e abrasionada com uma ponta diamantada por 10s. Os sistemas adesivos foram aplicados segundo as instruções do fabricante e a resina composta em incrementos 2mm de espessura. Cada incremento foi polimerizado por 40s. Em seguida, os espécimes foram cortadas no sentido mésio-distal, sendo a metade cervical destinada a análise da interface e a incisal destinada ao teste de µT , realizado em máquina de ensaio universal. Para cada espécime, 4 amostras do tipo "Hour Glass" foi testado e o padrão de fratura avaliado. Para o PC foram confeccionados 2 blocos para cada subgrupo (14), os quais receberam o mesmo tratamento de superfície dos espécimes utilizados para o teste de µT, porém as superfícies foram lavadas após a aplicação da solução ácida . Para a análise da interface, estas foram polidas e limpas através da aplicação de plasma de argônio e foram, juntamente com os espécimes do padrão de condicionamento, preparados para visualização em MEV. Os valores de resistência à µT foram analisados pelo teste ANOVA/Tukey (p<0,05). Na temperatura NORM não houve diferença estatística entre os adesivos, porém no FRIO a resistência à µT dos adesivos PBNT e PLP foram menores que a do SEB. Na temperatura QNT houve uma redução na resistência à µT dos adesivos SEB e PLP. Dentro de cada adesivo, o SEB aquecido, foi o único que reduziu sua resistência. O padrão de fratura mostrou maior incidência de fraturas coesivas em esmalte para o adesivo PBNT. Porém, os adesivos autocondicionantes mostraram uma predominância de fraturas adesivas/ coesivas e adesivas. O aspecto da interface e do padrão de condicionamento foi dependente da temperatura e do adesivo. O grupo PLP foi o que mais se aproximou do grupo com condicionamento ácido prévio, porém apenas na temperatura ambiente. Através dos resultados deste estudo, pode-se concluir que os adesivos autocondicionantes apresentam menor agressividade de desmineralização em relação ao ácido fosfórico e são influenciados pela alteração da temperatura.Abstract: This study evaluated the influence of adhesive temperature on microtensile (µT) bond strength of a total-etch adhesive, Primer&Bond NT (PBNT) and two self-etching adhesives, Clearfil SE Bond (SEB) and Adper Prompt L-Pop (PLP). Additionally, the etch patterns (EP) and resin-enamel interface were analyzed. Sixty-three bovine incisors were randomly divided into 3 experimental groups (N=21) according to the adhesive. Each group was subdivided into 3 sub-groups according to the temperature (NORM = 20°C; FRIO = 5°C; QNT = 40°C). The buccal enamel surfaces were flattened with 320, 400, 600-grit SiC paper and abrasioned with a diamond bur for 10s under water coolant. The adhesive were applied according to the manufacturers' instructions and resin was incrementally placed in 2mm thick. Each resin increment was light cured for 40s. The specimens were sectioned in the middle. For the µT test was used incisal center, accomplished in a universal testing machine, 4 "hour glass" type specimens were tested, after was fractures type classified. The cervical middle was used for interface analyze. The sections were polished and cleanned with Argon Plasma. For the EP, 24 fragments received the same treatment of the specimens used for µT, but the surface was rinsed off after the application of the acidic solutions. EP and interface analyze were examined under a scanning electron microscope (SEM). The bond strength data were analyzed by ANOVA/Tukey test (p<5%). No significant differences were found for NORM adhesives. However, for FRIO, PBNT and APLP presented the lower bond strength means significantly differing from SEB. For QNT, the SEB and PLP presented the lowest bond strength means. Within each adhesive, the SEB used in a QNT, was the only one to present a reduction in a bond strength. There was a more enamel cohesive fracture type to PBNT. However, the self-etching adhesive presented adhesive/cohesive fracture types. The interface aspect was temperature and adhesive depended. When the APLP was applied in normal temperature there was greater similarity with the group PBNT. The result of this study was concluded that the self-etching showed a least aggressive etch patterns in relation to the Phosphoric acid and temperature change influenced adhesive µT bond strength and EP. However, they were adhesive and temperature dependent.MestradoDentísticaMestre em Clínica Odontológic

Considerations about enamel microabrasion after 18 years

Purpose: To review of the current status of enamel microabrasion method and its results 18 years after the development and application of this method. Methods: A technique performing enamel microabrasion with hydrochloric acid mixed with pumice and other techniques employing a commercially available compound of hydrochloric acid and fine-grit silicon carbide particles in a water-soluble paste have been described. Much has been learned about the application of this esthetic technique, long-term treatment results and microscopic changes to the enamel surface that has significant clinical implications. The latest treatment protocol is presented and photographic case histories document the treatment results. Clinical observations made over 18 years are discussed. Results: According to our findings, the dental enamel microabrasion technique is a highly satisfactory, safe and effective procedure

In vitro-evaluation of secondary caries formation around restoration.

The objective of this in vitro study was to evaluate demineralization around restorations. Class V preparations were made on the buccal and lingual surfaces of each tooth. TPH (Group 1), Fuji II LC (Group 2), Tetric (Group 3), Dyract (Group 4), GS 80 (Group 5) and Chelon Fil (Group 6) were randomly placed in equal numbers of teeth. The teeth were submitted to a pH-cycling model associated with a thermocycling model. Sections were made and the specimens were examined for the presence of demineralization under polarized light microscopy. Demineralization was significantly reduced with Chelon Fil (Group 6). Furthermore, a similar inhibitory effect on the development of demineralization was observed in Groups 2, 4 and 5

Smile restoration through use of enamel mricroabrasion associated with tooth bleaching

Enamel microabrasion can eliminate enamel irregularities and discoloration defects, improving the appearance of teeth. This article presents the latest treatment protocol of enamel microabrasion to remove stains on the enamel surface. It has been verified that teeth submitted to microabrasion acquire a yellowish color because of the thinness of the remaining enamel, revealing the color of dentinal tissue to a greater degree. In these clinical conditions, correction of the color pattern of these teeth can be obtained with a considerable margin of clinical success using products containing carbamide peroxide in custom trays. Thus, patients can benefit from combined enamel microabrasion/tooth bleaching therapy, which yields attractive cosmetic results. Esthetics plays an important role in contemporary dentistry, especially because the media emphasizes beauty and health. Currently, in many countries, a smile is considered beautiful if it imitates a natural appearance, with clear, well-aligned teeth and defined anatomical shapes.1-3 Enamel microabrasion is one technique that can be used to correct discolored enamel. This technique has been elucidated and strongly advocated by Croll and Cavanaugh since 1986,4 and by other investigators1,2,5-13 who suggested mechanical removal of enamel stains using acidic substances in conjunction with abrasive agents. Enamel microabrasion is indicated to remove intrinsic stains of any color and of hard texture, and is contraindicated for extrinsic stains, dentinal stains, for patients with deficient labial seals, and in cases where there is no possibility to place a rubber dam adequately during the microabrasion procedure.1,2 It should be emphasized that enamel microabrasion causes a microreduction on the enamel surface,3,6,10 and, in some cases, teeth submitted to microabrasion may appear a darker or yellowish color because the thin remaining enamel surface can reveal some of the dentinal tissue color. In these situations, according to Haywood and Heymann in 1989,14 correction of the color pattern of teeth can be obtained through the use of whitening products containing carbamide peroxide in custom trays. A considerable margin of clinical success has been shown when diligence to at-home protocols is achieved by the patient and supervised by the professional.3 Considering these possibilities, this article presents the microabrasion technique for removal of stains on dental enamel, followed by tooth bleaching with carbamide peroxide and composite resin restoration, if required

Evaluating the bonding of two adhesive systems to enamel submitted to whitening dentifrices.

The aim of this study was to evaluate by micro-shear bond strength test, the bond strength of composite resin restoration to enamel submitted to whitening dentifrices. Forty bovine teeth were embedded in polystyrene resin and polished. The specimens were randomly divided into eight groups (n=5), according to the dentifrice (carbamide peroxide, hydrogen peroxide and conventional dentifrice) and the adhesive system (Prime & Bond 2.1 and Adper Single Bond 2). Dentifrice was applied for 15 minutes a day, for 21 days. Thirty minutes after the last exposure to dentifrice, the samples were submitted to a bonding procedure with the respective adhesive system. After that, four buttons of resin were bonded in each sample using transparent cylindrical molds. After 24 hours, the teeth were submitted to the micro-shear bond strength test and subsequent analysis of the fracture mode. Data were submitted to analysis of variance and Fisher's PLSD test (alpha = 0.05). The micro-shear bond strength showed no difference between adhesives systems but a significant reduction was found between the control and carbamide groups (p = 0.0145) and the control and hydrogen groups (p = 0.0370). The evaluation of the failures modes showed that adhesive failures were predominant. Cohesive failures were predominant in group IV The use of dentifrice with peroxides can decrease bonding strength in enamel

Dental bleaching with a 10% hydrogen peroxide product: a six-month clinical observation

Context: The possibility of bleaching vital teeth with peroxide-based products considerably revolutionized esthetic dentistry. Aim: The aim of this clinical study was to evaluate tooth color change and dental sensitivity after exposure to preloaded film containing a 10% hydrogen peroxide whitening system (Opalescence Trθswhite Supreme). Materials and Methods: A total of 13 volunteers, aged 18 to 25 years, participated in this study. The patients used the whitening system once a day for 60 minutes during the 8-day study. For maxillary incisors and canines, the color change was visually evaluated with the Vita color scale before, immediately, and six months after the treatment. Tooth sensitivity was evaluated during the daily gel applications. All whitening applications were done in office and under the supervision of a dental professional. Statistical Analysis Used: The results were analyzed using the Friedman Test (nonparametric repeated measures ANOVA) at a level of 5%, and Dunn's Multiple Comparison Test at the level of 5%. Results: It was verified that the original mean color values observed at the baseline analysis differed significantly from those observed immediately after bleaching, as well as from those seen in the analysis at six months ( P = 0.001). There was no significant difference between the mean color values observed in the immediate time and in the analysis at six months ( P = 0.474). No tooth sensitivity was observed in any patients. Conclusion: It was concluded that the bleaching technique using the 10% hydrogen peroxide system was effective in a short period of time without tooth sensitivity during applications

Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. Methods: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. Results: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. Conclusions: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures

Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd