815 research outputs found
Exclusion zone phenomena in water -- a critical review of experimental findings and theories
The existence of the exclusion zone (EZ), a layer of water in which plastic
microspheres are repelled from hydrophilic surfaces, has now been independently
demonstrated by several groups. A better understanding of the mechanisms which
generate EZs would help with understanding the possible importance of EZs in
biology and in engineering applications such as filtration and microfluidics.
Here we review the experimental evidence for EZ phenomena in water and the
major theories that have been proposed. We review experimental results from
birefringence, neutron radiography, nuclear magnetic resonance, and other
studies. Pollack and others have theorized that water in the EZ exists has a
different structure than bulk water, and that this accounts for the EZ. We
present several alternative explanations for EZs and argue that Schurr's theory
based on diffusiophoresis presents a compelling alternative explanation for the
core EZ phenomenon. Among other things, Schurr's theory makes predictions about
the growth of the EZ with time which have been confirmed by Florea et al. and
others. We also touch on several possible confounding factors that make
experimentation on EZs difficult, such as charged surface groups, dissolved
solutes, and adsorbed nanobubbles.Comment: 14 pg
The integration of on-line monitoring and reconfiguration functions using IEEE1149.4 into a safety critical automotive electronic control unit.
This paper presents an innovative application of IEEE 1149.4 and the integrated diagnostic reconfiguration (IDR) as tools for the implementation of an embedded test solution for an automotive electronic control unit, implemented as a fully integrated mixed signal system. The paper describes how the test architecture can be used for fault avoidance with results from a hardware prototype presented. The paper concludes that fault avoidance can be integrated into mixed signal electronic systems to handle key failure modes
The Effects of X-irradiation and Anti-lymphocyte Serum on the Responses to Tumour Allografts
The growth of a CBA mammary adenocarcinoma has been studied following transplantation to syngeneic and allogeneic recipients, with particular reference to the susceptibilities of the primary and secondary responses elicited by the tumour allografts, to impairment by whole-body X-irradiation and by treatment with rabbit-anti-mouse lymphocyte serum. In syngeneic recipients, the diameter of tumour implants increases linearly with time and there is no difference in the growth curves in females and in males. Later tumour generations grow faster than earlier generations. In allogeneic recipients, there is a relationship between the tumour diameter on day 21 (T) and the dose of X-irradiation (D) administered before implantation
The mechanical effects of extracorporeal irradiation on bone
Extracorporeal irradiation of an excised tumour-bearing segment of bone followed by its reimplantation is a technique used in bone sarcoma surgery for limb salvage when the bone is of reasonable quality. There is no agreement among previous studies about the dose of irradiation to be given: up to 300 Gy have been used. We investigated the influence of extracorporeal irradiation on the elastic and viscoelastic properties of bone. Bone was harvested from mature cattle and subdivided into 13 groups: 12 were exposed to increasing levels of irradiation: one was not and was used as a control. The specimens, once irradiated, underwent mechanical testing in saline at 37°C. The mechanical properties of each group, including Young's modulus, storage modulus and loss modulus, were determined experimentally and compared with the control group. There were insignificant changes in all of these mechanical properties with an increasing level of irradiation. We conclude that the overall mechanical effect of high levels of extracorporeal irradiation (300 Gy) on bone is negligible. Consequently the dose can be maximised to reduce the risk of local tumour recurrence
The mechanical effect of extracorporeal irradiation on bone
Extracorporeal irradiation and re-implantation of a bone segment is a technique employed in bone sarcoma surgery for limb salvage in the setting of reasonable bone stock. There is neither consensus nor rationale given for the dosage of irradiation used in previous studies, with values of up to 300Gy applied. We investigated the influence of extracorporeal irradiation on the elastic and viscoelastic properties of bone. Bone specimens were extracted from mature cattle and subdivided into thirteen groups; twelve groups exposed to increasing levels of irradiation and a control group. The specimens, once irradiated, underwent mechanical testing in saline at 37ËC. Mechanical properties were calculated by experimental means which included Youngâs Modulus, Poissonâs Ratio, Dissipation Factor, Storage Modulus, Loss Modulus and Dynamic Modulus. These were all obtained for comparison of the irradiated specimens to the control group. We found that the overall effect of increasing irradiation doses up to 300Gy seems to present negligible change, albeit negative, on the behavior of bone. However, the increase in Poissonâs ratio following extracorporeal irradiation treatment was statistically significant. Therefore, it is concluded that the overall mechanical effect of high levels of extracorporeal irradiation (300Gy) is minute, and could be administered to reduce the risk of malignancy recurrence
Inter- and intra-operator variability of the segmentation of the knee joint
Computer-Assisted Orthopedic Surgery (CAOS), developed to improve the alignment of the arthroplasty components, has increased in number significantly during the last decade. Some CAOS procedures rely on pre-operative imaging, raising the possibility of inter-and intra-observer variability affecting segmentations previously studied in various other tissues and locations [1]. However, despite the high prevalence of knee models and the abundance of TKR surgeries, to our knowledge, no study attempts to investigate the reliability and variability of the segmentation of knee joints. Therefore, the main purpose of this study is to find the intra- and inter-examiner variability of image segmentation of the knee
Identification of Movement Strategies during the Sit-to-Walk Movement in Patients with Knee Osteoarthritis
Patients with osteoarthritis (OA) of the knee commonly alter their movement to compensate for deficiencies. This study presents a new numerical procedure for classifying sit-to-walk (STW) movement strategies. Ten control and twelve OA participants performed the STW task in a motion capture laboratory. A full body biomechanical model was used. Participants were instructed to sit in a comfortable self-selected position on a stool height adjusted to 100% of their knee height and then stand and pick up an object from a table in front of them. Three matrices were constructed defining the progression of the torso, feet and hands in the sagittal plane along with a fourth expressing the location of the hands relative to the knees. Hierarchical clustering (HC) was used to identify different strategies. Trials were also classified as to whether the left (L) and right (R) extremities used a matching strategy (bilateral) or not (asymmetrical). Fisherâs exact test was used to compare this between groups. Clustering of the torso matrix dichotomised the trials in two major clusters; subjects leaning forward (LF) or not. The feet and hands matrices revealed sliding the foot backward (FB) and moving an arm forward (AF) strategies respectively. Trials not belonging in the AF cluster were submitted to the last HC of the fourth matrix exposing three additional strategies, the arm pushing through chair (PC), arm pushing through knee (PK) and arm not used (NA). The control participants used the LF+FBR+PK combination most frequently whereas the OA participants used the AFR+PCL. OA patients used significantly more asymmetrical arm strategies, p=0.034. The results demonstrated that control and OA participants favour different STW strategies. The OA patients asymmetrical arm behaviour possibly indicates compensating for weakness of the affected leg. These strategy definitions may be useful to assess post-operative outcomes and rehabilitation progress
Evidence for a mechanism for the initiation of acid hydrolase secretion by macrophages that is functionally independent of alternative pathway complement activation
Intracerebroventricular Catalase Reduces Hepatic Insulin Sensitivity and Increases Responses to Hypoglycemia in Rats
Specialized metabolic-sensors in the hypothalamus regulate blood glucose levels by influencing hepatic glucose output and hypoglycemic counter regulatory responses. Hypothalamic reactive oxygen species (ROS) may act as a metabolic signal mediating responses to changes in glucose, other substrates and hormones. The role of ROS in the brain's control of glucose homeostasis remains unclear. We hypothesized that hydrogen peroxide (HO), a relatively stable form of ROS, acts as a sensor of neuronal glucose consumption and availability and that lowering brain HO with the enzyme catalase would lead to systemic responses increasing blood glucose. During hyperinsulinemic euglycemic clamps in rats, ICV catalase infusion resulted in increased hepatic glucose output, which was associated with reduced neuronal activity in the arcuate nucleus of the hypothalamus (ARC). Electrophysiological recordings revealed a subset of ARC neurons expressing pro-opiomelanocortin (POMC) that were inhibited by catalase and excited by HO. During hypoglycemic clamps, ICV catalase increased glucagon and epinephrine responses to hypoglycemia, consistent with perceived lower glucose levels. Our data suggest that HO represents an important metabolic cue which, through tuning the electrical activity of key neuronal populations such as POMC neurons, may have a role in the brain's influence of glucose homeostasis and energy balance.This work was supported by the Juvenile Diabetes Research Foundation Grant 1-2006-29 and the Diabetes UK Grant RD05/ 003059 (to M.L.E.), the Wellcome Trust Grant WT098012 (to L.K.H.), and Cambridge Medical Research Council Centre for Study of Obesity and Related Disorders. In addition, PhD studentships/fellowships were supported for S.P.M. (Elmore Fund), P.H. (Sir Jules Thorn Trust), and C.-Y.Y. (Chang Gung University College of Medicine Grant numbers CMRPG6B0291 and CMRPG6B0292)
Structural Analysis of HIV-1 Maturation Using Cryo-Electron Tomography
HIV-1 buds form infected cells in an immature, non-infectious form. Maturation into an infectious virion requires proteolytic cleavage of the Gag polyprotein at five positions, leading to a dramatic change in virus morphology. Immature virions contain an incomplete spherical shell where Gag is arranged with the N-terminal MA domain adjacent to the membrane, the CA domain adopting a hexameric lattice below the membrane, and beneath this, the NC domain and viral RNA forming a disordered layer. After maturation, NC and RNA are condensed within the particle surrounded by a conical CA core. Little is known about the sequence of structural changes that take place during maturation, however. Here we have used cryo-electron tomography and subtomogram averaging to resolve the structure of the Gag lattice in a panel of viruses containing point mutations abolishing cleavage at individual or multiple Gag cleavage sites. These studies describe the structural intermediates correlating with the ordered processing events that occur during the HIV-1 maturation process. After the first cleavage between SP1 and NC, the condensed NC-RNA may retain a link to the remaining Gag lattice. Initiation of disassembly of the immature Gag lattice requires cleavage to occur on both sides of CA-SP1, while assembly of the mature core also requires cleavage of SP1 from CA
- âŚ