621 research outputs found
Correlating low energy impact damage with changes in modal parameters: a preliminary study on composite beams
This paper is an experimental study of the effects of multi-site damage on the vibration response of a composite beam damaged by low energy impact. The variation of the modal parameters with different levels of impact energy and density of impact is studied. Specimens are impacted symmetrically in order to induce a global rate of damage. A damage detection tool Damage Index is introduced in order to verify the estimation of damping ratios. Design of Experiments is used to establish the sensitivity of both energy of impact and density of damage. The DOE analysis results (using natural frequency only) indicate that impact energy for 2nd, 3rd and 4th bending modes is the most significant factor contributing to the changes in the modal parameters for this kind of symmetrical dynamic test
Lean-Burn Stationary Natural Gas Reciprocating Engine Operation with a Prototype Miniature Diode Side Pumped Passively Q-switched Laser Spark Plug
To meet the ignition system needs of large bore lean burn stationary natural gas engines a laser diode side pumped passively Q-switched laser igniter was developed and used to ignite lean mixtures in a single cylinder research engine. The laser design was produced from previous work. The in-cylinder conditions and exhaust emissions produced by the miniaturized laser were compared to that produced by a laboratory scale commercial laser system used in prior engine testing. The miniaturized laser design as well as the combustion and emissions data for both laser systems was compared and discussed. It was determined that the two laser systems produced virtually identical combustion and emissions data
Potential Predictors of Injury Among Pre-Professional Ballet and Contemporary Dancers
Injuries occur frequently among ballet and contemporary dancers. However, limited literature exists on injuries to pre-professional dancers in the USA. The goals of this study were to 1. provide a descriptive epidemiology of the incidence of musculoskeletal injuries in an adolescent and young adult dance population and 2. identify parsimonious regression models that could be potentially used to predict injury incidence. The study was based at the University of North Carolina School of the Arts (UNCSA) from Fall 2009 to Spring 2015. An injury was defined as any event that caused a dancer to be seen at the UNCSA Student Health Services and caused the dancer to modify or curtail dance activity for at least 1 day. Injury rate ratios (IRRs) were calculated using negative binomial generalized estimating equations. Models predicting injury rates were built using forward selection, stratified by sex. Among 480 dancers, 1,014 injuries were sustained. Most injuries were to the lower extremity and the result of overuse. There were differences in upper extremity, lower extremity, and traumatic injury rates by demographic subgroups. Among females, the most parsimonious predictive model for injury rates included a self-reported history of depression, age at time of injury, and number of injuries sustained at UNCSA prior to the semester of current injury. Among males, the most parsimonious model was a univariate model with family history of alcohol or drug problems. Strategies for traumatic injury prevention among dancers should be both sex- and style-specific. No differences were observed in overuse injury rates by sex or style, suggesting that generic overuse prevention strategies may not need to be guided by these factors. It is concluded that strategies can be implemented to reduce and mitigate the consequences of injuries if not the injuries themselves
Speeds and arrival times of solar transients approximated by self-similar expanding circular fronts
The NASA STEREO mission opened up the possibility to forecast the arrival
times, speeds and directions of solar transients from outside the Sun-Earth
line. In particular, we are interested in predicting potentially geo-effective
Interplanetary Coronal Mass Ejections (ICMEs) from observations of density
structures at large observation angles from the Sun (with the STEREO
Heliospheric Imager instrument). We contribute to this endeavor by deriving
analytical formulas concerning a geometric correction for the ICME speed and
arrival time for the technique introduced by Davies et al. (2012, ApJ, in
press) called Self-Similar Expansion Fitting (SSEF). This model assumes that a
circle propagates outward, along a plane specified by a position angle (e.g.
the ecliptic), with constant angular half width (lambda). This is an extension
to earlier, more simple models: Fixed-Phi-Fitting (lambda = 0 degree) and
Harmonic Mean Fitting (lambda = 90 degree). This approach has the advantage
that it is possible to assess clearly, in contrast to previous models, if a
particular location in the heliosphere, such as a planet or spacecraft, might
be expected to be hit by the ICME front. Our correction formulas are especially
significant for glancing hits, where small differences in the direction greatly
influence the expected speeds (up to 100-200 km/s) and arrival times (up to two
days later than the apex). For very wide ICMEs (2 lambda > 120 degree), the
geometric correction becomes very similar to the one derived by M\"ostl et al.
(2011, ApJ, 741, id. 34) for the Harmonic Mean model. These analytic
expressions can also be used for empirical or analytical models to predict the
1 AU arrival time of an ICME by correcting for effects of hits by the flank
rather than the apex, if the width and direction of the ICME in a plane are
known and a circular geometry of the ICME front is assumed.Comment: 15 pages, 5 figures, accepted for publication in "Solar Physics
Recent Developments of NEMO: Detection of Solar Eruptions Characteristics
The recent developments in space instrumentation for solar observations and
telemetry have caused the necessity of advanced pattern recognition tools for
the different classes of solar events. The Extreme ultraviolet Imaging
Telescope (EIT) of solar corona on-board SOHO spacecraft has uncovered a new
class of eruptive events which are often identified as signatures of Coronal
Mass Ejection (CME) initiations on solar disk. It is evident that a crucial
task is the development of an automatic detection tool of CMEs precursors. The
Novel EIT wave Machine Observing (NEMO) (http://sidc.be/nemo) code is an
operational tool that detects automatically solar eruptions using EIT image
sequences. NEMO applies techniques based on the general statistical properties
of the underlying physical mechanisms of eruptive events on the solar disc. In
this work, the most recent updates of NEMO code - that have resulted to the
increase of the recognition efficiency of solar eruptions linked to CMEs - are
presented. These updates provide calculations of the surface of the dimming
region, implement novel clustering technique for the dimmings and set new
criteria to flag the eruptive dimmings based on their complex characteristics.
The efficiency of NEMO has been increased significantly resulting to the
extraction of dimmings observed near the solar limb and to the detection of
small-scale events as well. As a consequence, the detection efficiency of CMEs
precursors and the forecasts of CMEs have been drastically improved.
Furthermore, the catalogues of solar eruptive events that can be constructed by
NEMO may include larger number of physical parameters associated to the dimming
regions.Comment: 12 Pages, 5 figures, submitted to Solar Physic
Effect of Solar Wind Drag on the Determination of the Properties of Coronal Mass Ejections from Heliospheric Images
The Fixed-\Phi (F\Phi) and Harmonic Mean (HM) fitting methods are two methods
to determine the average direction and velocity of coronal mass ejections
(CMEs) from time-elongation tracks produced by Heliospheric Imagers (HIs), such
as the HIs onboard the STEREO spacecraft. Both methods assume a constant
velocity in their descriptions of the time-elongation profiles of CMEs, which
are used to fit the observed time-elongation data. Here, we analyze the effect
of aerodynamic drag on CMEs propagating through interplanetary space, and how
this drag affects the result of the F\Phi and HM fitting methods. A simple drag
model is used to analytically construct time-elongation profiles which are then
fitted with the two methods. It is found that higher angles and velocities give
rise to greater error in both methods, reaching errors in the direction of
propagation of up to 15 deg and 30 deg for the F\Phi and HM fitting methods,
respectively. This is due to the physical accelerations of the CMEs being
interpreted as geometrical accelerations by the fitting methods. Because of the
geometrical definition of the HM fitting method, it is affected by the
acceleration more greatly than the F\Phi fitting method. Overall, we find that
both techniques overestimate the initial (and final) velocity and direction for
fast CMEs propagating beyond 90 deg from the Sun-spacecraft line, meaning that
arrival times at 1 AU would be predicted early (by up to 12 hours). We also
find that the direction and arrival time of a wide and decelerating CME can be
better reproduced by the F\Phi due to the cancellation of two errors:
neglecting the CME width and neglecting the CME deceleration. Overall, the
inaccuracies of the two fitting methods are expected to play an important role
in the prediction of CME hit and arrival times as we head towards solar maximum
and the STEREO spacecraft further move behind the Sun.Comment: Solar Physics, Online First, 17 page
Heliospheric Observations of STEREO-Directed Coronal Mass Ejections in 2008--2010: Lessons for Future Observations of Earth-Directed CMEs
We present a study of coronal mass ejections (CMEs) which impacted one of the
STEREO spacecraft between January 2008 and early 2010. We focus our study on 20
CMEs which were observed remotely by the Heliospheric Imagers (HIs) onboard the
other STEREO spacecraft up to large heliocentric distances. We compare the
predictions of the Fixed-Phi and Harmonic Mean (HM) fitting methods, which only
differ by the assumed geometry of the CME. It is possible to use these
techniques to determine from remote-sensing observations the CME direction of
propagation, arrival time and final speed which are compared to in situ
measurements. We find evidence that for large viewing angles, the HM fitting
method predicts the CME direction better. However, this may be due to the fact
that only wide CMEs can be successfully observed when the CME propagates more
than 100 deg from the observing spacecraft. Overall eight CMEs, originating
from behind the limb as seen by one of the STEREO spacecraft can be tracked and
their arrival time at the other STEREO spacecraft can be successfully
predicted. This includes CMEs, such as the events on 4 December 2009 and 9
April 2010, which were viewed 130 deg away from their direction of propagation.
Therefore, we predict that some Earth-directed CMEs will be observed by the HIs
until early 2013, when the separation between Earth and one of the STEREO
spacecraft will be similar to the separation of the two STEREO spacecraft in
2009--2010.Comment: 21 pages, accepted to Solar Physic
Luminescence spectra and kinetics of disordered solid solutions
We have studied both theoretically and experimentally the luminescence spectra and kinetics of crystalline, disordered solid solutions after pulsed excitation. First, we present the model calculations of the steady-state luminescence band shape caused by recombination of excitons localized in the wells of random potential induced by disorder. Classification of optically active tail states of the main exciton band into two groups is proposed. The majority of the states responsible for the optical absorption corresponds to the group of extended states belonging to the percolation cluster, whereas only a relatively small group of “radiative” states forms the steady-state luminescence band. The continuum percolation theory is applied to distinguish the “radiative” localized states, which are isolated in space and have no ways for nonradiative transitions along the tail states. It is found that the analysis of the exciton-phonon interaction gives the information about the character of the localization of excitons. We have shown that the model used describes quite well the experimental cw spectra of CdS(1−c)Sec and ZnSe(1−c)Tec solid solutions. Further, the experimental results are presented for the temporal evolution of the luminescence band. It is shown that the changes of band shape with time come from the interplay of population dynamics of extended states and spatially isolated “radiative” states. Finally, the measurements of the decay of the spectrally integrated luminescence intensity at long delay times are presented. It is shown that the observed temporal behavior can be described in terms of relaxation of separated pairs followed by subsequent exciton formation and radiative recombination. Electron tunneling processes are supposed to be responsible for the luminescence in the long-time limit at excitation below the exciton mobility edge. At excitation by photons with higher energies the diffusion of electrons can account for the observed behavior of the luminescence
Extent and Causes of Chesapeake Bay Warming
Coastal environments such as the Chesapeake Bay have long been impacted by eutrophication stressors resulting from human activities, and these impacts are now being compounded by global warming trends. However, there are few studies documenting long-term estuarine temperature change and the relative contributions of rivers, the atmosphere, and the ocean. In this study, Chesapeake Bay warming, since 1985, is quantified using a combination of cruise observations and model outputs, and the relative contributions to that warming are estimated via numerical sensitivity experiments with a watershed–estuarine modeling system. Throughout the Bay’s main stem, similar warming rates are found at the surface and bottom between the late 1980s and late 2010s (0.02 +/- 0.02C/year, mean +/- 1 standard error), with elevated summer rates (0.04 +/- 0.01C/year) and lower rates of winter warming (0.01 +/- 0.01C/year). Most (~85%) of this estuarine warming is driven by atmospheric effects. The secondary influence of ocean warming increases with proximity to the Bay mouth, where it accounts for more than half of summer warming in bottom waters. Sea level rise has slightly reduced summer warming, and the influence of riverine warming has been limited to the heads of tidal tributaries. Future rates of warming in Chesapeake Bay will depend not only on global atmospheric trends, but also on regional circulation patterns in mid-Atlantic waters, which are currently warming faster than the atmosphere.
Supporting model data available at: https://doi.org/10.25773/c774-a36
- …