1,443 research outputs found
Integrating photovoltaic cells into decorative architectural glass using traditonal glasspainting techniques and fluorescent dyes
Photovoltaic cells can be integrated into decorative glass, providing a showcase for this renewable technology,
whilst assisting in the creation of sustainable architecture through generation of electricity from the building surface. However, traditional, opaque, square, crystalline-silicon solar cells contrast strongly with their
surroundings when incorporated into translucent, coloured glazing. Methods of blending photovoltaic cells into
their surroundings were developed, using traditional glass painting techniques. A design was created in which
opaque paint was applied to the areas of glass around underlying photovoltaic cells. Translucent, platinum paint
was used on the glass behind the photovoltaic cells. This covered the grey cell backs whilst reflecting light and
movement. The platinum paint was shown to cause a slight increase in power produced by photovoltaic cells
placed above it. To add colour, very small amounts of Lumogen F dye (BASF) were incorporated into a silicone
encapsulant (Dow Corning, Sylgard 184), which was then used hold photovoltaic cells in place between sheets of
painted glass. Lumogen dyes selectively absorb and emit light, giving a good balance between colour addition
and electricity production from underlying photovoltaic cells. When making sufficient quantities of dyed
encapsulant for a 600 x 450 mm test piece, the brightness of the dye colours faded, and fluorescence decreased,
although some colour was retained. Improvement of the method, including testing of alternative encapsulant
materials, is required, to ensure that the dyes continue to fluoresce within the encapsulant. In contrast, the
methods of adding opacity variation to glass, through use of glass painting, are straightforward to develop for use
in a wide variety of photovoltaic installations. Improvement of these methods opens up a wide variety of
architectural glass design opportunities with integrated photovoltaics, providing an example of one new medium
to make eco-architecture more aesthetically pleasing, whilst generating electricity
Recommended from our members
Creative use of BIPV materials: barriers and solutions
Inventive use of photovoltaic (PV) materials in architecture can be developed through use of PV in artworks. This is particularly important in increasing the uptake of building-integrated building-integrated photovoltaics (BIPV), by developing novel methods of combining and installing PV materials. Current examples of PV artwork and design are examined, from small to large scale, to assess the current design limitations. The design of two PV artworks is discussed in detail, including an artwork that uses the principle of the luminescent solar concentrator (LSC), to show the way in which design hurdles are discovered and overcome. Challenges range from difficulties in obtaining small quantities of PV materials; the balance between efficiency and artistic effect; through to technical and siting issues that an artist must address when designing a functional PV structure. Methods of overcoming these barriers are explored, including the use of lumogen dyes in encapsulant materials
Improving the aesthetics of photovoltaics in decorative architectural glass
Increasing colour variety in photovoltaics can improve the uptake of this renewable technology, which is vital to the creation of sustainable architecture. However, the introduction of colour into photovoltaics often involves increased cost and decreased efficiency. A method was found to add colour to photovoltaics, using luminescent materials: fluorescent organic dyes (BASF Lumogen). These selectively absorb and emit light, giving a good balance between colour addition and electricity production from underlying photovoltaic cells. Very small amounts of Lumogen dye were added to a silicone encapsulant (Dow Corning Sylgard 184), which was then used hold photovoltaic cells in place between sheets of painted glass. When making sufficient quantities of dyed encapsulant for a 600 x 450 mm testpiece, the dye colours faded, with low levels of fluorescence, although some colour was retained. Improvement of the method, including testing of alternative encapsulant materials, is required, to ensure that the dyes continue to fluoresce within the encapsulant. Although the Lumogen dyes are quite stable when compared to other dye molecules, in general organic dyes are not yet sufficiently durable to make this technology viable for installations that are to last for more than 20 years: the guaranteed lifetime of standard photovoltaic modules. Dye replenishment, or replacement of materials, will be required; or a product with a shorter ‘useful’ lifetime identified. This method opens up a wide variety of architectural glass design opportunities that incorporate photovoltaics, providing an example of one new medium to make eco-architecture more aesthetically pleasing, whilst generating electricity
Recommended from our members
A silicone host for Lumogen dyes
Altering the encapsulant colour in photovoltaic (PV) modules is a straightforward way of achieving greater colour range whilst minimising additional cost in PV systems. Lumogen fluorescent, organic dyes offer a way of adding colour to the encapsulant with minimal change in efficiency. The silicone encapsulant material Sylgard 184 is tested as a host material for Lumogen dyes. A method of dissolving various Lumogen dyes in Sylgard is investigated, and limits of solubility are explored. Methods of preparing samples suitable for optical measurements are found. Optical density is measured for a range of dye concentrations. The results indicate that Lumogen dyes can be dissolved successfully within Sylgard 184, giving good optical properties for lower dye concentrations. Initial photoluminescent quantum yield measurements confirm that Lumogen dyes can function effectively within a Sylgard host. This is promising for use of this material combination in the creation of coloured, fluorescent PV encapsulant layers
Recommended from our members
The search for building-integrated PV materials with good aesthetic potential: a survey
Building-integrated photovoltaics (PV) is currently dominated by blue and black rectilinear forms. Greater variety of colour and form could lead to much better uptake of PV in the built environment, also increasing the potential for PV to be used as an artistic material. Listing the available PV technologies by colour gives a clearer picture of the current situation. An assessment of photostability, efficiency and price, for each material, indicates the materials that have the potential to fill the gaps in the colour spectrum. Use of combinations of materials that can be fabricated in different ways from the current, standardised, PV modules will further increase the possibilities for use in building integration, Extending the lifetimes of organic PV, dye-sensitised PV or luminescent solar concentrators will increase the possibilities for development of new PV products
Recommended from our members
Improving the aesthetics of photovoltaics through use of coloured encapsulants
Photovoltaics (solar cells) are important in the creation of sustainable architecture, but are difficult to integrate into a wide variety of architectural styles, which is necessary if this technology is to be extensively used. Adding variety to the colour range in these installations will provide a way of making this solar energy technology more visually exciting, so methods need to be found to add colour at minimal extra cost, without loss of efficiency. Adding colour to photovoltaic encapsulant materials offers a solution. It is shown that fluorescent, organic Lumogen dyes (BASF) can be added to the photovoltaic encapsulant materials Sylgard 184 (Dow Corning) and EVA (Ethylene Vinyl Acetate). The dyes continue to fluoresce within these host materials. Encapsulating a photovoltaic cell with Sylgard containing Lumogen red 300 dye (BASF) demonstrates that light can be transported to a photovoltaic cell by the fluorescent dyes inside the encapsulant material that surrounds the cell. This slightly improves the electricity output from the photovoltaic cell, and is especially promising for use in light-transmissive photovoltaic arrays incorporating widely-spaced photovoltaic cells, such as architectural glass art that incorporates photovoltaics. Further work is needed to test and improve the performance of the dyes over time, to ensure that installations incorporating this technology can last for the minimum twenty years that is the current industry standard for photovoltaics
Medication Assisted Treatment: Prescription Drug and Opioid Addiction Expansion Project
Greater Portland Health (GPH) in collaboration with Preble Street Resource Center was awarded a Medication Assisted Treatment: Prescription Drug & Opioid Addiction (MOUD-PDOA) grant from SAMHSA. The GPH MOUD-PDOA project will include a mixed-methods evaluation led by Catherine E. Cutler Institute. The evaluation team will build knowledge and provide feedback to inform the implementation and refinement of the GPH MOUD-PDOA Program.
Evaluation Goals: Document program strategies and identify barriers and facilitators to implementation Examine the efficacy of using a continuum of treatment services to increase access to MOUD among vulnerable populations in underserved communities Assess the impact of the intervention strategies on patient engagement and outcomes
This report highlights the process and outcome evaluation data collected during Year 1. For more information, please contact M.Lindsey Smith or Kat Knight
SUPPORT for ME: Key Stakeholder Interview Summary
This summary feedback report is organized to inform the Office of MaineCare Services goal of addressing barriers and finding new and/or improved ways to increase capacity in Maine for people who seek treatment and recovery services for substance use disorder. Interview protocols were designed to assess critical domains of interest for the state, which include: current and potential provider capacity, access to care & service delivery provider willingness, and financial/ administrative policies.
Key Highlights from the stakeholder interviews indicated that: While there have been improvements in the integration of care for persons with behavioral health (BH) diagnoses, this integration has not fully synced with substance use disorder (SUD) services in Maine; better integration of BH and SUD is needed. Behavioral Health Homes and Opioid Health Homes are regarded as excellent models of care, and many key stakeholders would like to see this model of care expand for all members with a diagnosis of SUD. Low reimbursement rates for some SUD services including outpatient therapy, residential treatment, medically supervised withdrawal services and intensive outpatient treatment programs affect the quality of workforce, available services, and hinders capacity building efforts. Stigma exists regarding serving the population with SUD, at all levels- from state policymakers, to providers, and to the community. Maine lacks what some consider as basic SUD service options available elsewhere (e.g., variety of medication assisted-withdrawal services, plus intermediate levels of care).
For more information, please contact M. Lindsey Smith, PhD, at [email protected]
- …