50 research outputs found

    Poor outcome of revised resurfacing hip arthroplasty: 397 cases from the Australian Joint Replacement Registry

    Get PDF
    BACKGROUND AND PURPOSE: Recent years have seen a rapid increase in the use of resurfacing hip arthroplasty despite the lack of literature on the long-term outcome. In particular, there is little evidence regarding the outcome of revisions of primary resurfacing. The purpose of this analysis was to examine the survivorship of primary resurfacing hip arthroplasties that have been revised. PATIENTS AND METHODS: Over 12,000 primary resurfacing hip arthroplasties were recorded by the Australian Orthopaedic Association National Joint Replacement Registry between September 1, 1999 and December 31, 2008. During this time, 397 revisions for reasons other than infection were reported for these primary resurfacings and classified as acetabular, femoral, or both acetabular and femoral revisions. The survivorship of the different types of revisions was estimated using the Kaplan-Meier method and compared using proportional hazard models. Additionally, the outcome of a femoral-only revision was compared to that of primary conventional total hip arthroplasty. RESULTS: Acetabular-only revision had a high risk of re-revision compared to femoral-only and both acetabular and femoral revision (5-year cumulative per cent revision of 20%, 7%, and 5% respectively). Femoral-only revision had a risk of re-revision similar to that of revision of both the acetabular and femoral components. Femoral-only revision had over twice the risk of revision of primary conventional total hip arthroplasty. INTERPRETATION: Revision of a primary resurfacing arthroplasty is associated with a major risk of re-revision. The best outcome is achieved when either the femoral-only or both the acetabular and femoral components are revised. Technically straightforward femoral-only revisions generally have a worse outcome than a primary conventional total hip arthroplasty

    Competing risks survival analysis applied to data from the Australian Orthopaedic Association National Joint Replacement Registry

    Get PDF
    BACKGROUND AND PURPOSE: The Kaplan-Meier (KM) method is often used in the analysis of arthroplasty registry data to estimate the probability of revision after a primary procedure. In the presence of a competing risk such as death, KM is known to overestimate the probability of revision. We investigated the degree to which the risk of revision is overestimated in registry data. PATIENTS AND METHODS: We compared KM estimates of risk of revision with the cumulative incidence function (CIF), which takes account of death as a competing risk. We considered revision by (1) prosthesis type in subjects aged 75–84 years with fractured neck of femur (FNOF), (2) cement use in monoblock prostheses for FNOF, and (3) age group in patients undergoing total hip arthroplasty (THA) for osteoarthritis (OA). RESULTS: In 5,802 subjects aged 75–84 years with a monoblock prosthesis for FNOF, the estimated risk of revision at 5 years was 6.3% by KM and 4.3% by CIF, a relative difference (RD) of 46%. In 9,821 subjects of all ages receiving an Austin Moore (non-cemented) prosthesis for FNOF, the RD at 5 years was 52% and for 3,116 subjects with a Thompson (cemented) prosthesis, the RD was 79%. In 44,365 subjects with a THA for OA who were less than 70 years old, the RD was just 1.4%; for 47,430 subjects > 70 years of age, the RD was 4.6% at 5 years. INTERPRETATION: The Kaplan-Meier method substantially overestimated the risk of revision compared to estimates using competing risk methods when the risk of death was high. The bias increased with time as the incidence of the competing risk of death increased. Registries should adopt methods of analysis appropriate to the nature of their data.Marianne H. Gillam, Philip Ryan, Stephen E. Graves, Lisa N. Miller, Richard N. de Steiger and Amy Salte

    Outcome of primary resurfacing hip replacement: evaluation of risk factors for early revision: 12,093 replacements from the Australian Joint Registry

    Get PDF
    BACKGROUND AND PURPOSE: The outcome of modern resurfacing remains to be determined. The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) started collection of data on hip resurfacing at a time when modern resurfacing was started in Australia. The rate of resurfacing has been higher in Australia than in many other countries. As a result, the AOANJRR has one of the largest series of resurfacing procedures. This study was undertaken to determine the results of this series and the risk factors associated with revision. PATIENTS AND METHODS: Data from the AOANJRR were used to analyze the survivorship of 12,093 primary resurfacing hip replacements reported to the Joint Replacement Registry between September 1999 and December 2008. This was compared to the results of primary conventional total hip replacement reported during the same period. The Kaplan-Meier method and proportional hazards models were used to determine risk factors such as age, sex, femoral component size, primary diagnosis, and implant design. RESULTS: Female patients had a higher revision rate than males; however, after adjusting for head size, the revision rates were similar. Prostheses with head sizes of less than 50 mm had a higher revision rate than those with head sizes of 50 mm or more. At 8 years, the cumulative per cent revision of hip resurfacing was 5.3 (4.6-6.2), as compared to 4.0 (3.8-4.2) for total hip replacement. However, in osteoarthritis patients aged less than 55 years with head sizes of 50 mm or more, the 7-year cumulative per cent revision for hip resurfacing was 3.0 (2.2-4.2). Also, hips with dysplasia and some implant designs had an increased risk of revision. INTERPRETATION: Risk factors for revision of resurfacing were older patients, smaller femoral head size, patients with developmental dysplasia, and certain implant designs. These results highlight the importance of patient and prosthesis selection in optimizing the outcome of hip resurfacing

    Joint registry approach for identification of outlier prostheses

    Get PDF
    Background and purposeJoint Replacement Registries play a significant role in monitoring arthroplasty outcomes by publishing data on survivorship of individual prostheses or combinations of prostheses. The difference in outcomes can be device- or non-device-related, and these factors can be analyzed separately. Although registry data indicate that most prostheses have similar outcomes, some have a higher than anticipated rate of revision when compared to all other prostheses in their class. This report outlines how the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) has developed a method to report prostheses with a higher than expected rate of revision. These are referred to as "outlier" prostheses.Material and methodsSince 2004, the AOANJRR has developed a standardized process for identifying outliers. This is based on a 3-stage process consisting of an automated algorithm, an extensive analysis of individual prostheses or combinations by registry staff, and finally a meeting involving a panel from the Australian Orthopaedic Association Arthroplasty Society. Outlier prostheses are listed in the Annual Report as (1) identified but no longer used in Australia, (2) those that have been re-identified and that are still used, and (3) those that are being identified for the first time.Results78 prostheses or prosthesis combinations have been identified as being outliers using this approach (AOANJRR 2011 Annual Report). In addition, 5 conventional hip prostheses were initially identified, but after further analysis no longer met the defined criteria. 1 resurfacing hip prosthesis was initially identified, subsequently removed from the list, and then re-identified the following year when further data were available. All unicompartmental and primary total knee prostheses identified as having a higher than expected rate of revision have continued to be re-identified.InterpretationIt is important that registries use a transparent and accountable process to identify an outlier prosthesis. This paper describes the development, implementation, assessment, and impact of the approach used by the Australian Registry.Richard N de Steiger, Lisa N Miller, David C Davidson, Philip Ryan and Stephen E Grave

    The use of antibiotic-loaded bone cement and systemic antibiotic prophylactic use in 2,971,357 primary total knee arthroplasties from 2010 to 2020: an international register-based observational study among countries in Africa, Europe, North America, and Oceania.

    Get PDF
    BACKGROUND AND PURPOSE Antibiotic-loaded bone cement (ALBC) and systemic antibiotic prophylaxis (SAP) have been used to reduce periprosthetic joint infection (PJI) rates. We investigated the use of ALBC and SAP in primary total knee arthroplasty (TKA). PATIENTS AND METHODS This observational study is based on 2,971,357 primary TKAs reported in 2010-2020 to national/regional joint arthroplasty registries in Australia, Denmark, Finland, Germany, Italy, the Netherlands, New Zealand, Norway, Romania, South Africa, Sweden, Switzerland, the UK, and the USA. Aggregate-level data on trends and types of bone cement, antibiotic agents, and doses and duration of SAP used was extracted from participating registries. RESULTS ALBC was used in 77% of the TKAs with variation ranging from 100% in Norway to 31% in the USA. Palacos R+G was the most common (62%) ALBC type used. The primary antibiotic used in ALBC was gentamicin (94%). Use of ALBC in combination with SAP was common practice (77%). Cefazolin was the most common (32%) SAP agent. The doses and duration of SAP used varied from one single preoperative dosage as standard practice in Bolzano, Italy (98%) to 1-day 4 doses in Norway (83% of the 40,709 TKAs reported to the Norwegian arthroplasty register). CONCLUSION The proportion of ALBC usage in primary TKA varies internationally, with gentamicin being the most common antibiotic. ALBC in combination with SAP was common practice, with cefazolin the most common SAP agent. The type of ALBC and type, dose, and duration of SAP varied among participating countries

    Trajectories of Early Adolescent Loneliness: Implications for Physical Health and Sleep

    Get PDF
    The current study examines the relationship between prolonged loneliness, physical health, and sleep among young adolescents (10–13 years; N = 1214; 53% girls). Loneliness was measured at 10, 12 and 13 years of age along with parent-reported health and sleep outcomes. Using growth mixture modelling, 6 distinct trajectories were identified: ‘low increasing to high loneliness’ (n = 23, 2%), ‘high reducing loneliness’ (n = 28, 3%), ‘medium stable loneliness’ (n = 60, 5%), ‘medium reducing loneliness’ (n = 185, 15%), ‘low increasing to medium loneliness’ (n = 165, 14%), and ‘low stable loneliness’ (n = 743, 61%). Further analyses found non-significant differences between the loneliness trajectories and parent-report health and sleep outcomes including visits to health professionals, perceived general health, and sleep quality. The current study offers an important contribution to the literature on loneliness and health. Results show that the relationship may not be evident in early adolescence when parent reports of children’s health are used. The current study highlights the importance of informant choice when reporting health. The implications of the findings for future empirical work are discussed

    Notes for genera: basal clades of Fungi (including Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota)

    Get PDF
    Compared to the higher fungi (Dikarya), taxonomic and evolutionary studies on the basal clades of fungi are fewer in number. Thus, the generic boundaries and higher ranks in the basal clades of fungi are poorly known. Recent DNA based taxonomic studies have provided reliable and accurate information. It is therefore necessary to compile all available information since basal clades genera lack updated checklists or outlines. Recently, Tedersoo et al. (MycoKeys 13:1--20, 2016) accepted Aphelidiomycota and Rozellomycota in Fungal clade. Thus, we regard both these phyla as members in Kingdom Fungi. We accept 16 phyla in basal clades viz. Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota. Thus, 611 genera in 153 families, 43 orders and 18 classes are provided with details of classification, synonyms, life modes, distribution, recent literature and genomic data. Moreover, Catenariaceae Couch is proposed to be conserved, Cladochytriales Mozl.-Standr. is emended and the family Nephridiophagaceae is introduced

    Actual versus Forecast Burden of Primary Hip and Knee Replacement Surgery in Australia: Analysis of Data from the Australian Orthopaedic Association National Joint Replacement Registry

    No full text
    National projections of future joint replacement use can help us understand the changing burden of severe osteoarthritis. This study aimed to compare actual utilisation rates for primary total hip replacement (THR) and total knee replacement (TKR) to previously forecast estimates for Australia. Data from the Australian Orthopaedic Association National Joint Replacement Registry and Australian Bureau of Statistics were used to calculate ‘actual’ THR and TKR utilisation rates for the years 2014–2019, by sex and age group. ‘Forecast’ utilisation rates for 2014–2019 were derived from an earlier study that modelled two alternate scenarios for THR and TKR in Australia: Scenario 1 assumed a constant rate of surgery; Scenario 2 assumed continued growth in surgery rates. Actual utilisation rates were compared descriptively to forecast rates for females and males (overall and by age group). Rate ratios were calculated to indicate the association between actual and forecast THR and TKR rates, with a rate ratio of 1.00 reflecting perfect alignment. Over the study period, 191,996 THRs (53% in females) and 312,203 TKRs (55% in females) were performed. For both sexes, actual rates lay clearly between the Scenario 1 and 2 forecast estimates. In 2019, actual THR utilisation rates were 179 per 100,000 females (Scenario 1: 156; Scenario 2: 200) and 158 per 100,000 males (Scenario 1: 139; Scenario 2: 191). Actual TKR utilisation rates in 2019 were 289 per 100,000 females (Scenario 1: 275; Scenario 2: 387) and 249 per 100,000 males (Scenario 1: 216; Scenario 2: 312). Age-specific rate ratios were close to 1.00 for all age groups, indicating good alignment between forecast and actual joint replacement rates. These validation analyses showed that linear plus exponential growth forecasting scenarios provided an efficient approximation of actual joint replacement utilisation. This indicates our modelling techniques can be used to judiciously predict future surgery demand, including for age groups with high surgery rates

    The three-year survivorship of robotically assisted versus non-robotically assisted unicompartmental knee arthroplasty

    No full text
    Aim: There has been a significant reduction in unicompartmental knee arthroplasty (UKA) procedures recorded in Australia. This follows several national joint registry studies documenting high UKA revision rates when compared to total knee arthroplasty (TKA). With the recent introduction of robotically assisted UKA procedures, it is hoped that outcomes improve. This study examines the cumulative revision rate of UKA procedures implanted with a newly introduced robotic system and compares the results to one of the best performing non-robotically assisted UKA prostheses, as well as all other non-robotically assisted UKA procedures. Methods: Data from the Australian Orthopaedic Association National Joint Arthroplasty Registry (AOANJRR) for all UKA procedures performed for osteoarthritis (OA) between 2015 and 2018 were analyzed. Procedures using the Restoris MCK UKA prosthesis implanted using the Mako Robotic-Arm Assisted System were compared to non-robotically assisted Zimmer Unicompartmental High Flex Knee System (ZUK) UKA, a commonly used UKA with previously reported good outcomes and to all other non-robotically assisted UKA procedures using Cox proportional hazard ratios (HRs) and Kaplan-Meier estimates of survivorship. Results: There was no difference in the rate of revision when the Mako-assisted Restoris UKA was compared to the ZUK UKA (zero to nine months: HR 1.14 (95% CI 0.71 to 1.83; p = 0.596) vs nine months and over: HR 0.66 (95% CI 0.42 to 1.02; p = 0.058)). The Mako-assisted Restoris had a significantly lower overall revision rate compared to the other types of non-robotically assisted procedures (HR 0.58 (95% confidence interval (CI) 0.42 to 0.79); p Conclusion: This study reports comparable short-term survivorship for the Mako robotically assisted UKA compared to the ZUK UKA and improved survivorship compared to all other non-robotic UKA. These results justify the continued use and investigation of this procedure. However, the higher rate of early revision for infection for robotically assisted UKA requires further investigation.</p
    corecore