2,807 research outputs found
An experimental study of the effect of back rake angle in rock cutting
The objective of this paper is to investigate the influence of the rake angle on the magnitude of the intrinsic specific energy and the inclination of the force acting on the cutting face of a Polycrystalline Diamond Compact (PDC) sharp cutter while tracing a groove on the surface of a rock sample. An extensive and comprehensive set of cutting experiments was performed on a wide range of quarry rock samples using a state of the art rock cutting equipment (Wombat). The results conform with the previous studies by other researchers; the intrinsic specific energy is in good agreement with the uni-axial compressive strength of the rock samples when the cutter is positioned at back rake angles between 5° to 20°. New results on a few rock samples were also obtained by performing novel experimental tests at very large rake angles (θ > 70°) as well as negative rake angles, showing that the intrinsic specific energy increases dramatically once the back rake angle exceeds 75°. Results also indicate that the decrease of the apparent interfacial friction angle with increasing back rake angle seems to follow a “universal trend” weakly dependent on the rock sample
Intraoperative Neurophysiological Monitoring for Endoscopic Endonasal Approaches to the Skull Base: A Technical Guide.
Intraoperative neurophysiological monitoring during endoscopic, endonasal approaches to the skull base is both feasible and safe. Numerous reports have recently emerged from the literature evaluating the efficacy of different neuromonitoring tests during endonasal procedures, making them relatively well-studied. The authors report on a comprehensive, multimodality approach to monitoring the functional integrity of at risk nervous system structures, including the cerebral cortex, brainstem, cranial nerves, corticospinal tract, corticobulbar tract, and the thalamocortical somatosensory system during endonasal surgery of the skull base. The modalities employed include electroencephalography, somatosensory evoked potentials, free-running and electrically triggered electromyography, transcranial electric motor evoked potentials, and auditory evoked potentials. Methodological considerations as well as benefits and limitations are discussed. The authors argue that, while individual modalities have their limitations, multimodality neuromonitoring provides a real-time, comprehensive assessment of nervous system function and allows for safer, more aggressive management of skull base tumors via the endonasal route
Recommended from our members
Synthesis and biological analysis of novel glycoside derivatives of L-AEP, as targeted antibacterial agents
To develop targeted methods for treating bacterial infections, the feasibility of using glycoside derivatives of the antibacterial compound L-R-aminoethylphosphonic acid (L-AEP) has been investigated. These derivatives are hypothesized to be taken up by bacterial cells via carbohydrate uptake mechanisms, and then hydrolysed in situ by bacterial borne glycosidase enzymes, to selectively afford L-AEP. Therefore the synthesis and analysis of ten glycoside derivatives of L-AEP, for selective targeting of specific bacteria, is reported. The ability of these derivatives to inhibit the growth of a panel of Gram-negative bacteria in two different media is discussed. β-Glycosides (12a) and (12b) that contained L-AEP linked to glucose or galactose via a carbamate linkage inhibited growth of a range of organisms with the best MICs being <0.75 mg/ml; for most species the inhibition was closely related to the hydrolysis of the equivalent chromogenic glycosides. This suggests that for (12a) and (12b), release of L-AEP was indeed dependent upon the presence of the respective glycosidase enzyme
Drosophila embryos as model systems for monitoring bacterial infection in real time.
Journal ArticleResearch Support, Non-U.S. Gov'tDrosophila embryos are well studied developmental microcosms that have been used extensively as models for early development and more recently wound repair. Here we extend this work by looking at embryos as model systems for following bacterial infection in real time. We examine the behaviour of injected pathogenic (Photorhabdus asymbiotica) and non-pathogenic (Escherichia coli) bacteria and their interaction with embryonic hemocytes using time-lapse confocal microscopy. We find that embryonic hemocytes both recognise and phagocytose injected wild type, non-pathogenic E. coli in a Dscam independent manner, proving that embryonic hemocytes are phagocytically competent. In contrast, injection of bacterial cells of the insect pathogen Photorhabdus leads to a rapid 'freezing' phenotype of the hemocytes associated with significant rearrangement of the actin cytoskeleton. This freezing phenotype can be phenocopied by either injection of the purified insecticidal toxin Makes Caterpillars Floppy 1 (Mcf1) or by recombinant E. coli expressing the mcf1 gene. Mcf1 mediated hemocyte freezing is shibire dependent, suggesting that endocytosis is required for Mcf1 toxicity and can be modulated by dominant negative or constitutively active Rac expression, suggesting early and unexpected effects of Mcf1 on the actin cytoskeleton. Together these data show how Drosophila embryos can be used to track bacterial infection in real time and how mutant analysis can be used to genetically dissect the effects of specific bacterial virulence factors.Wellcome TrustBBSR
Performance of Several Low‐Cost Accelerometers
Several groups are implementing low-cost host-operated systems of strong-motion accelerographs to support the somewhat divergent needs of seismologists and earthquake engineers. The Advanced National Seismic System Technical Implementation Committee (ANSS TIC, 2002), managed by the U.S. Geological Survey (USGS) in cooperation with other network operators, is exploring the efficacy of such systems if used in ANSS networks. To this end, ANSS convened a working group to explore available Class C strong-motion accelerometers (defined later), and to consider operational and quality control issues, and the means of annotating, storing, and using such data in ANSS networks. The working group members are largely coincident with our author list, and this report informs instrument-performance matters in the working group’s report to ANSS. Present examples of operational networks of such devices are the Community Seismic Network (CSN; csn.caltech.edu), operated by the California Institute of Technology, and Quake-Catcher Network (QCN; Cochran et al., 2009; qcn.stanford.edu; November 2013), jointly operated by Stanford University and the USGS. Several similar efforts are in development at other institutions. The overarching goals of such efforts are to add spatial density to existing Class-A and Class-B (see next paragraph) networks at low cost, and to include many additional people so they become invested in the issues of earthquakes, their measurement, and the damage they cause
ElAM: A computer program for the analysis and representation of anisotropic elastic properties
Copyright © 2010 Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Computer Physics Communications. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Computer Physics Communications, Volume 181, Issue 12 (2010), DOI: 10.1016/j.cpc.2010.08.033The continuum theory of elasticity has been used for more than a century and has applications in many fields of science and engineering. It is very robust, well understood and mathematically elegant. In the isotropic case elastic properties are easily represented, but for non-isotropic materials, even in the simple cubic symmetry, it can be difficult to visualise how properties such as Young's modulus or Poisson's ratio vary with stress/strain orientation. The ElAM (Elastic Anisotropy Measures) code carries out the required tensorial operations (inversion, rotation, diagonalisation) and creates 3D models of an elastic property's anisotropy. It can also produce 2D cuts in any given plane, compute averages following diverse schemes and query a database of elastic constants to support meta-analyses.
Program summary
Program title: ElAM1.0
Catalogue identifier: AEHB_v1_0
Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHB_v1_0.html
Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland
Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html
No. of lines in distributed program, including test data, etc.: 43 848
No. of bytes in distributed program, including test data, etc.: 2 498 882
Distribution format: tar.gz
Programming language: Fortran90
Computer: Any
Operating system: Linux, Windows (XP, Vista)
RAM: Depends chiefly on the size of the arrays representing elastic properties in 3D
Classification: 7.7
Nature of problem: Representation of elastic moduli and ratios, and of wave velocities, in 3D; automatic discovery of unusual elastic properties.
Solution method: Stiffness matrix (6×6)(6×6) inversion and conversion to compliance tensor (3×3×3×3)(3×3×3×3), tensor rotation, dynamic matrix diagonalisation, simple optimisation, postscript and VRML output preparation.
Running time: Dependent on angular accuracy and size of elastic constant database (from a few seconds to a few hours). The tests provided take from a few seconds for test0 to approximately 1 hour for test4
Cepheids with giant companions. I. Revealing a numerous population of double-lined binary Cepheids
Masses of classical Cepheids of 3 to 11 M are predicted by theory but
those measured, clump between 3.6 and 5 M. As a result, their
mass-luminosity relation is poorly constrained, impeding our understanding of
basic stellar physics and the Leavitt Law. All Cepheid masses come from the
analysis of 11 binary systems, including only 5 double-lined and well-suited
for accurate dynamical mass determination. We present a project to analyze a
new, numerous group of Cepheids in double-lined binary (SB2) systems to provide
mass determinations in a wide mass interval and study their evolution. We
analyze a sample of 41 candidate binary LMC Cepheids spread along the P-L
relation, that are likely accompanied by luminous red giants, and present
indirect and direct indicators of their binarity. In a spectroscopic study of a
subsample of 18 brightest candidates, for 16 we detected lines of two
components in the spectra, already quadrupling the number of Cepheids in SB2
systems. Observations of the whole sample may thus lead to quadrupling all the
Cepheid mass estimates available now. For the majority of our candidates,
erratic intrinsic period changes dominate over the light travel-time effect due
to binarity. However, the latter may explain the periodic phase modulation for
4 Cepheids. Our project paves the way for future accurate dynamical mass
determinations of Cepheids in the LMC, Milky Way, and other galaxies, which
will potentially increase the number of known Cepheid masses even 10-fold,
hugely improving our knowledge about these important stars.Comment: 12 pages, 7 figures, 3 tables, accepted for publication in Ap
Polarization and Strong Infra-Red Activity in Compressed Solid Hydrogen
Under a pressure of ~150 GPa solid molecular hydrogen undergoes a phase
transition accompanied by a dramatic rise in infra-red absorption in the vibron
frequency range. We use the Berry's phase approach to calculate the electric
polarization in several candidate structures finding large, anisotropic dynamic
charges and strongly IR-active vibron modes. The polarization is shown to be
greatly affected by the overlap between the molecules in the crystal, so that
the commonly used Clausius-Mossotti description in terms of polarizable,
non-overlapping molecular charge densities is inadequate already at low
pressures and even more so for the compressed solid.Comment: To appear in Phys. Rev. Let
Extraction of the coupling constant from NN scattering data
We reexamine Chew's method for extracting the coupling constant from
np differential cross section measurements. Values for this coupling are
extracted below 350 MeV, in the potential model region, and up to 1 GeV. The
analyses to 1~GeV have utilized 55 data sets. We compare these results to those
obtained via mapping techniques. We find that these two methods give
consistent results which are in agreement with previous Nijmegen
determinations.Comment: 12 pages of text plus 2 figures. Revtex file and postscript figures
available via anonymous FTP at ftp://clsaid.phys.vt.edu/pub/n
- …