2,081 research outputs found
Rapid formation of single crystalline Ge nanowires by anodic metal assisted etching
Germanium nanowires are produced by a novel approach, combining two well known electrochemical and metal assisted chemical etching. The metal assisted etching procedure is enhanced by incorporation of HF in the catalytic solution and application of a constant bias to the substrate. Fast etching, caused by metal nanoparticles, facilitate pore nucleation for further pore growth. The improved current transport de- veloped in the vicinity of the metal nanoparticles maintains a concentrated current density at the pore tip which results in an elongation of the pores in one direction and formation of long nanowires. With this new approach it is possible to fabricate nanowires with diameter below 100 nm and tens of micrometers long
Substrate induced proximity effect in superconducting niobium nanofilms
Structural and superconducting properties of high quality Niobium nanofilms
with different thicknesses are investigated on silicon oxide and sapphire
substrates. The role played by the different substrates and the superconducting
properties of the Nb films are discussed based on the defectivity of the films
and on the presence of an interfacial oxide layer between the Nb film and the
substrate. The X-ray absorption spectroscopy is employed to uncover the
structure of the interfacial layer. We show that this interfacial layer leads
to a strong proximity effect, specially in films deposited on a SiO
substrate, altering the superconducting properties of the Nb films. Our results
establish that the critical temperature is determined by an interplay between
quantum-size effects, due to the reduction of the Nb film thicknesses, and
proximity effects
Dimensional crossover and incipient quantum size effects in superconducting niobium nanofilms
Superconducting and normal state properties of sputtered Niobium nanofilms
have been systematically investigated, as a function of film thickness in a
d=9-90 nm range, on different substrates. The width of the
superconducting-to-normal transition for all films remained in few tens of mK,
thus remarkably narrow, confirming their high quality. We found that the
superconducting critical current density exhibits a pronounced maximum, three
times larger than its bulk value, for film thickness around 25 nm, marking the
3D-to-2D crossover. The extracted magnetic penetration depth shows a sizeable
enhancement for the thinnest films, aside the usual demagnetization effects.
Additional amplification effects of the superconducting properties have been
obtained in the case of sapphire substrates or squeezing the lateral size of
the nanofilms. For thickness close to 20 nm we also measured a doubled
perpendicular critical magnetic field compared to its saturation value for d>33
nm, indicating shortening of the correlation length and the formation of small
Cooper pairs in the condensate. Our data analysis evidences an exciting
interplay between quantum-size and proximity effects together with
strong-coupling effects and importance of disorder in the thinnest films,
locating the ones with optimally enhanced critical properties close to the
BCS-BEC crossover regime
Using RAPD markers potential to identify heritability for growth in Fenneropenaeus indicus
Sampling was done using 90 post larvae which were produced by reproduction of some broodstocks of Fenneropenaeus indicus in one day and reared in the same situation for 4 months. Samples were divided into 3 groups: high, medium and low growth (based on weight and length). Genomic DNA was extracted from muscle tissue using the phenol-chloroform method. The polymerase chain reaction (PCR) was carried out using 21 RAPD loci and PCR products were separated on 3% Agarose gel. From 21 loci studied, 12 produced polymorphic bands. The most polymorphic produced bands using OPAQ 9 and the least by OPAQ 7. Search for specific markers in F. indicus one specific band was observed in the low growth group using OPAQ4. The highest genetic distance (0.457) was between the low growth group and the medium and the lowest (0.091) between high growth and medium groups, therefore the highest genetic identity (0.912) was between high growth and medium groups and the lowest (0.633) between low growth group and the medium. Neighbor-joining resulted in two groups, the first including high and medium growth groups and the second low growth group. It appears that low growth group depended on separated population. Considering the mean weight of F1 (mean weight of 90 specimens) (16.25±1.5 g), parental generation mean weight of 15 ±1.2 and mean weight of parent 31.6 g, response to selection (R) and heritability for growth in this species were estimated to be 1.2±0.2 and 0.07±0.01 respectively
Molecular evaluation of the population of Silver Pomfret (Pampus argenteus) in the Persian Gulf and Oman Sea (Iranian &Kuwaiti waters)
A total of 162 specimens of Silver Pomfret (Pampus argenteus) including 38 samples from Kuwait and 124 samples from Iran (24 from Khouzestan, 24 from Chabahar and 38 from Bushehr) were examined for their DNA structure. DNA from all specimens was extracted using the Phenol-chloroform and amplified using PCR method with a pair of primers with ND sub(2) gene sequence. The PCR products were about 1300 (bp) for all samples. For RFLP analysis 16 restriction enzymes Bcl I, Pst I, Acc II, BseN I, Tru I, Dra I, Alw26 I, Hin6 I, Tas I, Alu I, EcoR I ,Hae III, Hinc II, Hind III, Hinf I and Hpa II were used. DNA bands were visualized by Gel electrophoresis (polyacrylamid) and staining with silver nitrate. Out of 16 enzymes, four showed polymorphism that includedg Hinf I, Alu I, Acc II, and Hpa II. Of the total 162 samples, 13 showed polymorphic patterns. Six haplotypes were rare occurring only once, but others which were only four different kinds occurred more than once. The REAP test gave no significant result for the examined regions (P>0.05). Therefore, our results revealed that the Pampus argenteus stocks in the Persian Gulf and Oman Sea of Iranian and Kuwaiti waters constitute a unique population
Angular dependence of copper surface damage induced by an intense coherent thz radiation beam
In this work, we show the damage induced by an intense coherent terahertz (THz) beam on copper surfaces. The metallic surface was irradiated by multiple picosecond THz pulses generated by the Free Electron Laser (FEL) at the ISIR facility of the Osaka University, reaching an electric field on the sample surface up to ~4 GV/m. No damage occurs at normal incidence, while images and spectroscopic analysis of the surface point out a clear dependence of the damage on the incidence angle, the electric field intensity, and polarization of the pulsed THz radiation. Ab initio analysis shows that the damage at high incidence angles could be related to the increase of the absorbance, i.e., to the increase of the temperature around or above 1000â—¦ C. The experimental approach we introduced with multiple fast irradiations represents a new powerful technique useful to test, in a reproducible way, the damage induced by an intense electric gradient on copper and other metallic surfaces in view of future THz-based compact particle accelerators
Does Alumina Coating Alter the Solid Permeable Interphase Dynamics in LiMn2O4 Cathodes?
It is well known that the Al2O3 coating of the LiMn2O4 cathodes leads to improvement of the performance of these electrodes. However, the effect of the coating on the fundamental processes occurring on the interface with the active material which results in the formation of the solid permeable interphase is yet to be investigated. These effects should be more pronounced in the first cycle when a dynamic interaction of the active material at high voltage with the electrolyte and binder leads to the formation of this passivation layer. Here, we present a detailed investigation of the solid permeable interphase formation in alumina-coated and uncoated LiMn2O4 electrodes using X-ray absorption spectroscopy and analysis on the electrodes at the predesigned charging/ discharging states. We demonstrate that the alumina coating leads to modification of the solid permeable layer and its dynamics. We also discuss the possible influences of interface modifications via coating on the battery performance
The cryogenic magneto-optical device for terahertz radiation detection
We present here a small-scale liquid Helium (LHe) immersion cryostat with an innovative optical setup suitable to work in long wavelength radiation ranges and under applied magnetic field. The cryostat is a multi stage device with several shielding in addition to several optical stages. The system has been designed with an external liquid Nitrogen boiler to reduce the liquid bubbling. The optical and mechanical properties of the optical elements were calculated and optimized for the designed configuration while the optical layout has been simulated and optimized among different configurations based on the geometry of the device. The final design has been optimized for low noise radiation measurements of proximity junction arrays under applied magnetic field in the wavelength range λ=250-2500 µm
- …