The Laser of the ALICE Time Projection Chamber

The large TPC ($95 \mathrm{m}^3$) of the ALICE detector at the CERN LHC was commissioned in summer 2006. The first tracks were observed both from the cosmic ray muons and from the laser rays injected into the TPC. In this article the basic principles of operating the $266 \mathrm{nm}$ lasers are presented, showing the installation and adjustment of the optical system and describing the control system. To generate the laser tracks, a wide laser beam is split into several hundred narrow beams by fixed micro-mirrors at stable and known positions throughout the TPC. In the drift volume, these narrow beams generate straight tracks at many angles. Here we describe the generation of the first tracks and compare them with simulations.Comment: QM06 poster proceedings, 6 pages, 4 figure

Chemical Abundance Constraints on White Dwarfs as Halo Dark Matter

We examine the chemical abundance constraints on a population of white dwarfs in the Halo of our Galaxy. We are motivated by microlensing evidence for massive compact halo objects (Machos) in the Galactic Halo, but our work constrains white dwarfs in the Halo regardless of what the Machos are. We focus on the composition of the material that would be ejected as the white dwarfs are formed; abundance patterns in the ejecta strongly constrain white dwarf production scenarios. Using both analytical and numerical chemical evolution models, we confirm that very strong constraints come from Galactic Pop II and extragalactic carbon abundances. We also point out that depending on the stellar model, significant nitrogen is produced rather than carbon. The combined constraints from C and N give $\Omega_{WD} h < 2 \times 10^{-4}$ from comparison with the low C and N abundances in the Ly$\alpha$ forest. We note, however, that these results are subject to uncertainties regarding the nucleosynthesis of low-metallicity stars. We thus investigate additional constraints from D and $^4$He, finding that these light elements can be kept within observational limits only for \Omega_{WD} \la 0.003 and for a white dwarf progenitor initial mass function sharply peaked at low mass (2$M_\odot$). Finally, we consider a Galactic wind, which is required to remove the ejecta accompanying white dwarf production from the galaxy. We show that such a wind can be driven by Type Ia supernovae arising from the white dwarfs themselves, but these supernovae also lead to unacceptably large abundances of iron. We conclude that abundance constraints exclude white dwarfs as Machos. (abridged)Comment: Written in AASTeX, 26 pages plus 4 ps figure

Wind Forced Variability in Eddy Formation, Eddy Shedding, and the Separation of the East Australian Current

The East Australian Current (EAC), like many other subtropical western boundary currents, is believed to be penetrating further poleward in recent decades. Previous observational and model studies have used steady state dynamics to relate changes in the westerly winds to changes in the separation behavior of the EAC. As yet, little work has been undertaken on the impact of forcing variability on the EAC and Tasman Sea circulation. Here using an eddy‐permitting regional ocean model, we present a suite of simulations forced by the same time‐mean fields, but with different atmospheric and remote ocean variability. These eddy‐permitting results demonstrate the nonlinear response of the EAC to variable, nonstationary inhomogeneous forcing. These simulations show an EAC with high intrinsic variability and stochastic eddy shedding. We show that wind stress variability on time scales shorter than 56 days leads to increases in eddy shedding rates and southward eddy propagation, producing an increased transport and southward reach of the mean EAC extension. We adopt an energetics framework that shows the EAC extension changes to be coincident with an increase in offshore, upstream eddy variance (via increased barotropic instability) and increase in subsurface mean kinetic energy along the length of the EAC. The response of EAC separation to regional variable wind stress has important implications for both past and future climate change studies

Isochrones and Luminosity Functions for Old White Dwarfs

Using a new grid of models of cooling white dwarfs, we calculate isochrones and luminosity functions in the Johnson-Kron/Cousins and HST filter sets for systems containing old white dwarfs. These new models incorporate a non-grey atmosphere which is necessary to properly describe the effects of molecular opacity at the cool temperatures of old white dwarfs. The various functions calculated and extensively tabulated and plotted are meant to be as utilitarian as possible for observers so all results are listed in quantities that observers will obtain. The tables and plots developed should eventually prove critical in interpreting the results of HST's Advanced Camera observations of the oldest white dwarfs in nearby globular clusters, in understanding the results of searches for old white dwarfs in the Galactic halo, and in determining ages for star clusters of all ages using white dwarfs. As a practical application we demonstrate the use of these results by deriving the white dwarf cooling age of the old Galactic cluster M67.Comment: 7 pages, 8 tables, accepted for publication in the Astrophysical Journa

A theoretical review of risk identification : perspective of construction industry

Abstract: Managing risks in construction projects has been acknowledged as an essential management process in order to accomplish the project objectives in terms of time, cost, quality, safety and environmental sustainability. However, up to now most studies have concentrated on some aspects of construction risk management rather than using a systematic and comprehensive approach to identifying risks and analyse the probability of occurrence and impacts of these risks. Risk management consists of identifying risks, assessing risks either quantitatively or qualitatively, selecting the appropriate method for handling risks, and then monitoring and documenting risks. By identifying risks in an early stage of planning and assessing their comparative significance, project managers can identify techniques employed to reduce risks and allocate the best people to mitigate them. Thus, this research focuses on risk identification, as opposed to other processes of risk management. This research is mainly a literature review and was conducted through accredited academic and Professional journals, books, the internet, theses, and dissertations. The reviewed literature revealed that the entire risk management process is not only limited to solving problem in advance but also for the occurrence of any unexpected future problems. The study further shown that issues with possible threats envisaged in a project are not only a means to reduce losses within the project, but also a means to transfer risks into opportunities, which can lead to economic profitability, environmental and other advantages. This paper is of value to managers and decision makers involved in managing risks where it is intended to boost their knowledge regarding the importance of risk identification as a crucial stage of the process to managing risks

Evaluating the use of risk-identification techniques in the South African construction industry

Abstract: Purpose of this paper: This paper seeks to investigate the current use of risk-identification techniques in the South African construction industry. Methodology: An extensive literature search was conducted to collect the secondary data; and these were supplemented by primary data via a questionnaire survey. These were then distributed to contractors, who were conveniently sampled in Gauteng (South Africa). The data were analysed by using the Mean-Item Score (MIS). Findings: A total of twelve risk-identification techniques were identified, of which checklist, flowchart and brainstorming were rated as the most used risk-identification techniques in construction projects in Gauteng. Research limitations: This research was conducted only with considered contractors in the Gauteng province. Further research could include an increased target population more representative of the South African construction industry. Practical implications: Practitioners and researchers are likely to find the study useful; as it discusses the risk-identification techniques used in construction; and in particular, it seeks to report empirically on the techniques mostly applied in identifying risks in construction projects. Valuable information about current risk-identification techniques are provided..

A combined FEG-SEM and TEM study of silicon nanodot assembly

Nanodots forming dense assembly on a substrate are difficult to characterize in terms of size, density, morphology and cristallinity. The present study shows how valuable information can be obtained by a combination of electron microscopy techniques. A silicon nanodots deposit has been studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) to estimate essentially the dot size and density, quantities emphasized because of their high interest for application. High resolution SEM indicates a density of 1.6 × 1012 dots/cm2 for a 5 nm to 10 nm dot size. TEM imaging using a phase retrieval treatment of a focus series gives a higher dot density (2 × 1012 dots/cm2) for a 5 nm dot size. High Resolution Transmission Electron Microscopy (HRTEM) indicates that the dots are crystalline which is confirmed by electron diffraction. According to HRTEM and electron diffraction, the dot size is about 3 nm which is significantly smaller than the SEM and TEM results. These differences are not contradictory but attributed to the fact that each technique is probing a different phenomenon. A core-shell structure for the dot is proposed which reconcile all the results. All along the study, Fourier transforms have been widely used under many aspects

Microscopic correlation between chemical and electronic states in epitaxial graphene on SiC(000-1)

We present energy filtered electron emission spectromicroscopy with spatial and wave-vector resolution on few layer epitaxial graphene on SiC$(000-1) grown by furnace annealing. Low energy electron microscopy shows that more than 80% of the sample is covered by 2-3 graphene layers. C1s spectromicroscopy provides an independent measurement of the graphene thickness distribution map. The work function, measured by photoelectron emission microscopy (PEEM), varies across the surface from 4.34 to 4.50eV according to both the graphene thickness and the graphene-SiC interface chemical state. At least two SiC surface chemical states (i.e., two different SiC surface structures) are present at the graphene/SiC interface. Charge transfer occurs at each graphene/SiC interface. K-space PEEM gives 3D maps of the k_|| pi - pi* band dispersion in micron scale regions show that the Dirac point shifts as a function of graphene thickness. Novel Bragg diffraction of the Dirac cones via the superlattice formed by the commensurately rotated graphene sheets is observed. The experiments underline the importance of lateral and spectroscopic resolution on the scale of future electronic devices in order to precisely characterize the transport properties and band alignments

Non-Hausdorff Symmetries of C*-algebras

Symmetry groups or groupoids of C*-algebras associated to non-Hausdorff spaces are often non-Hausdorff as well. We describe such symmetries using crossed modules of groupoids. We define actions of crossed modules on C*-algebras and crossed products for such actions, and justify these definitions with some basic general results and examples.Comment: very minor changes. To appear in Math. An

A New Channel for the Detection of Planetary Systems Through Microlensing: I. Isolated Events Due to Planet Lenses

We propose and evaluate the feasibility of a new strategy to search for planets via microlensing. This new strategy is designed to detect planets in "wide" orbits, i.e., with orbital separation, $a$ greater than $\sim 1.5 R_E$. Planets in wide orbits may provide the dominant channel for the microlensing discovery of planets, particularly low-mass (e.g., Earth-mass) planets. This paper concentrates on events in which a single planet serves as a lens, leading to an isolated event of short duration. We point out that a distribution of events due to lensing by stars with wide-orbit planets is necessarily accompanied by a distribution of shorter- duration events. The fraction of events in the latter distribution is proportional to the average value of $\sqrt{q}$, where $q$ is the ratio between \pl and stellar masses. The position of the peak or peaks also provides a measure of the mass ratios typical of planetary systems. We study detection strategies that can optimize our ability to discover isolated short-duration events due to lensing by planets, and find that monitoring employing sensitive photometry is particularly useful. If planetary systems similar to our own are common, even modest changes in detection strategy should lead to the discovery of a few isolated events of short duration every year. We therefore also address the issue of the contamination due to stellar populations of any microlensing signal due to low-mass MACHOs. We describe how, even for isolated events of short duration, it will be possible to test the hypothesis that the lens was a planet instead of a low-mass MACHO, if the central star of the planetary system contributes a measurable fraction of the baseline flux.Comment: 37 pages, 6 figure. To be published in the Astrophysical Journal. This is part one of a series of papers on microlensing by planetary systems containing wide-orbit planets; the series represents a reorganization and extension of astro-ph/971101