339 research outputs found
Multi-machine benchmark of the self-consistent 1D scrape-off layer model DIV1D from stagnation point to target with SOLPS-ITER
This paper extends a 1D dynamic physics-based model of the scrape-off layer (SOL) plasma, DIV1D, to include the core SOL and possibly a second target. The extended model is benchmarked on 1D mapped SOLPS-ITER simulations to find input settings for DIV1D that allow it to describe SOL plasmas from upstream to target—calibrating it on a scenario and device basis. The benchmark shows a quantitative match between DIV1D and 1D mapped SOLPS-ITER profiles for the heat flux, electron temperature, and electron density within roughly 50% on: (1) the Tokamak Configuration Variable (TCV) for a gas puff scan; (2) a single SOLPS-ITER simulation of the Upgraded Mega Ampere Spherical Tokamak; and (3) the Upgraded Axially Symmetric Divertor EXperiment in Garching Tokamak (AUG) for a simultaneous scan in heating power and gas puff. Once calibrated, DIV1D self-consistently describes dependencies of the SOL solution on core fluxes and external neutral gas densities for a density scan on TCV whereas a varying SOL width is used in DIV1D for AUG to match a simultaneous change in power and density. The ability to calibrate DIV1D on a scenario and device basis is enabled by accounting for cross field transport with an effective flux expansion factor and by allowing neutrals to be exchanged between SOL and adjacent domains.</p
Performance assessment of a tightly baffled, long-legged divertor configuration in TCV with SOLPS-ITER
Numerical simulations explore the possibility to test the tightly baffled,
long-legged divertor (TBLLD) concept in a future upgrade of the Tokamak \`a
configuration variable (TCV). The SOLPS-ITER code package is used to compare
the exhaust performance of several TBLLD configurations with existing unbaffled
and baffled TCV configurations. The TBLLDs feature a range of radial gaps
between the separatrix and the outer leg side walls. All considered TBLLDs are
predicted to lead to a denser and colder plasma in front of the targets and
improve the power handling by factors of 2-3 compared to the present, baffled
divertor and by up to a factor of 12 compared to the original, unbaffled
configuration. The improved TBLLD performance is mainly due to a better neutral
confinement with improved plasma-neutral interactions in the divertor region.
Both power handling capability and neutral confinement increases when reducing
the radial gap. The core compatibility of TBLLDs with nitrogen seeding is also
evaluated and the detachment window with acceptable core pollution for the
proposed TBLLDs is explored, showing a reduction of required upstream impurity
concentration up to 18% to achieve the detachment with thinner radial gap
Risk-Benefit Considerations of Mitigation Measures on Acrylamide Content of Foods - A Case Study on Potatoes, Cereals and Coffee
Reduction in benefits of total flux expansion on divertor detachment due to parallel flows
The Super-X divertor (SXD) is an alternative divertor configuration
leveraging total flux expansion at the outer strike point (OSP). Key features
for the attractiveness of the SXD are facilitated detachment access and
control, as predicted by the extended 2-point model (2PM). However, parallel
flows are not consistently included in the 2PM. In this work, the 2PM is
refined to overcome this limitation: the role of total flux expansion on the
pressure balance is made explicit, by including the effect of parallel flows.
In consequence, the effect of total flux expansion on detachment access and
control is weakened, compared to predictions of the 2PM. This new model
partially explains discrepancies between the 2PM and experiments performed on
TCV, in ohmic L-mode scenarios, where in core density ramps in lower
single-null (SN) configuration, the impact of the OSP major radius Rt on the
CIII emission front movement in the divertor outer leg - used as a proxy for
the plasma temperature - is substantially weaker than 2PM predictions; and in
OSP sweeps in lower and upper SN configurations, with a constant core density,
the peak parallel particle flux density at the OSP is almost independent of Rt,
while the 2PM predicts a linear dependence. Finally, analytical and numerical
modelling of parallel flows in the divertor is presented, to support the
argument. It is shown that an increase in total flux expansion can favour
supersonic flows at the OSP. Parallel flows are also shown to be relevant by
analysing SOLPS-ITER simulations of TCV
Assessment of alternative divertor configurations as an exhaust solution for DEMO
Plasma exhaust has been identified as a major challenge towards the realisation of magnetic confinement fusion. To mitigate the risk that the single null divertor (SND) with a high radiation fraction in the scrape-of-layer (SOL) adopted for ITER will not extrapolate to a DEMO reactor, the EUROfusion consortium is assessing potential benefits and engineering challenges of alternative divertor configurations. Alternative configurations that could be readily adopted in a DEMO design include the X divertor (XD), the Super-X divertor (SXD), the Snowflake divertor (SFD) and the double null divertor (DND). The flux flaring towards the divertor target of the XD is limited by the minimum grazing angle at the target set by gaps and misalignments. The characteristic increase of the target radius in the SXD is a trade-off with the increased TF coil volume, but, ultimately, also limited by forces onto coils. Engineering constraints also limit XD and SXD characteristics to the outer divertor leg with a solution for the inner leg requiring up-down symmetric configurations. Capital cost increases with respect to a SND configuration are largest for SXD and SFD, which require both significantly more poloidal field coil conductors and in the case of the SXD also more toroidal field coil conductors. Boundary models with increasing degrees of complexity have been used to predict the beneficial effect of the alternative configurations on exhaust performance. While all alternative configurations should decrease the power that must be radiated in the outer divertor, only the DND and possibly the SFD also ease the radiation requirements in the inner divertor. These decreases of the radiation requirements are however expected to be small making the ability of alternative divertors to increase divertor radiation without excessive core performance degradation their main advantage. Initial 2D fluid modeling of argon seeding in XD and SFD configurations indicate such advantages over the SND, while results for SXD and DND are still pending. Additional improvements, expected from increased turbulence in the low poloidal field region of the SFD also remain to be verified. A more precise comparison with the SND as well as absolute quantitative predictions for all configurations requires more complete physics models that are currently only being developed
Recent sawtooth studies on the Tokamak configuration variable
Abstract TP9.00126 submitted for the DPP11 Meeting of The American Physical Society
Recommended from our members
Resistive Wall Modes and Plasma Rotation in DIII-D
A271 RESISTIVE WALL MODES AND PLASMA ROTATION IN DIII-D. The stabilization of the resistive wall mode (RWM) by toroidal plasma rotation has been demonstrated in neutral beam heated DIII-D discharges for values of {beta} up to 70% above the no-wall stability limit. The stabilizing effect of plasma rotation is explained by assuming some dissipation, which is caused by the rapid plasma flow through a perturbed magnetic field. Sufficient plasma rotation is predicted to extend the operating regime of tokamaks from the conventional no-wall {beta} limit up to the ideal wall {beta} limit. While plasma rotation has a stabilizing effect on the RWM, a finite amplitude RWM also increases the drag on the plasma, which leads to a non-linear interaction between the RWM and the plasma rotation. A good understanding of the underlying dissipation mechanism is crucial for reliable predictions of the plasma rotation which will be required for wall-stabilization in a burning-plasma experiment. In order to measure the stabilizing effect of plasma rotation on the RWM the technique of active MHD spectroscopy, which was previously applied to MHD modes at frequencies above 10 kHz, is extended to frequencies of a few Hz
Multicode turbulence simulations of diverted TCV plasmas and detailed validation against the experiment
Impact of Divertor Shape on Divertor Performance in strongly Baffled Divertors on MAST Upgrade
Harnessing fusion energy efficiently requires optimising heat and particle
exhaust in the edge from the fusion core plasma, which can be achieved through
magnetic shaping of the divertor into Alternative Divertor Configurations
(ADCs). In this study, we leverage MAST-U's unique shaping capabilities, which
allow for a variation in the ratio of the magnetic field at the
X-point and target (), to investigate the power exhaust and
core-edge compatibility of ADCs.
Experiments show ADCs with large ratios drastically enhance
divertor performance, with heat and particle loads reduced by factors up to
and a 120 \% reduction in detachment onset. Notably, these benefits
are achieved without compromising core plasma conditions.
Our analysis attributes these improvements to the extra volume available
below the ionisation front in longer leg-length divertors. This facilitates
power dissipation and reduced particle loads through ion sinks from atomic
(Electron-Ion Recombination) and molecular (Molecular-Activated Recombination)
processes. The onset of divertor detachment and the evolution of the detachment
front agrees with analytic models and divertor exhaust simulations.
These insights emphasise the potential minor divertor geometry adjustments
can have on power exhaust. This study illuminates pathways for devising
optimised exhaust strategies in future fusion devices
- …