Microwave integrated circuits for space applications

Monolithic microwave integrated circuits (MMIC), which incorporate all the elements of a microwave circuit on a single semiconductor substrate, offer the potential for drastic reductions in circuit weight and volume and increased reliability, all of which make many new concepts in electronic circuitry for space applications feasible, including phased array antennas. NASA has undertaken an extensive program aimed at development of MMICs for space applications. The first such circuits targeted for development were an extension of work in hybrid (discrete component) technology in support of the Advanced Communication Technology Satellite (ACTS). It focused on power amplifiers, receivers, and switches at ACTS frequencies. More recent work, however, focused on frequencies appropriate for other NASA programs and emphasizes advanced materials in an effort to enhance efficiency, power handling capability, and frequency of operation or noise figure to meet the requirements of space systems

NASA developments in solid state power amplifiers

Over the last ten years, NASA has undertaken an extensive program aimed at development of solid state power amplifiers for space applications. Historically, the program may be divided into three phases. The first efforts were carried out in support of the advanced communications technology satellite (ACTS) program, which is developing an experimental version of a Ka-band commercial communications system. These first amplifiers attempted to use hybrid technology. The second phase was still targeted at ACTS frequencies, but concentrated on monolithic implementations, while the current, third phase, is a monolithic effort that focusses on frequencies appropriate for other NASA programs and stresses amplifier efficiency. The topics covered include: (1) 20 GHz hybrid amplifiers; (2) 20 GHz monolithic MESFET power amplifiers; (3) Texas Instruments' (TI) 20 GHz variable power amplifier; (4) TI 20 GHz high power amplifier; (5) high efficiency monolithic power amplifiers; (6) GHz high efficiency variable power amplifier; (7) TI 32 GHz monolithic power amplifier performance; (8) design goals for Hughes' 32 GHz variable power amplifier; and (9) performance goals for Hughes' pseudomorphic 60 GHz power amplifier

Operationalizing R4D and innovation platforms in East and Southern Africa

United States Agency for International Developmen

Patient-Reported Outcomes Measurement Information System physical function correlates with Toronto Extremity Salvage Score in an orthopaedic oncology population

Background: The National Institute of Health\u27s Patient-Reported Outcomes Measurement Information System (PROMIS) uses computerised-adaptive testing to reduce survey burden and improve sensitivity. PROMIS is being used across medical and surgical disciplines but has not been studied in orthopaedic oncology. Questions/purposes: The aim of the study was to compare PROMIS measures with upper extremity (UE) and lower extremity (LE) Toronto Extremity Salvage Score (TESS) by assessing the following: (1) responder burden, (2) correlation between scores and (3) floor/ceiling effects. Patients and methods: This cross-sectional trial analysed all 97 adult patients treated surgically for a bone or soft tissue tumour at a tertiary institution between November 2015 and March 2016. TESS (UE or LE) and PROMIS (Physical Function, Pain Interference and Depression) surveys were administered preoperatively. Pearson correlations between each PROMIS domain and TESS were calculated, as were floor/ceiling effects of each outcome measure. Results: (1) Completion of three PROMIS questionnaires required a mean total of 16.8 (+/- 5.8 standard deviation) questions, compared with 31 and 32 questions for the LE and UE TESS questionnaires, respectively. (2) The PROMIS Physical Function scores demonstrated a strong positive correlation with the LE TESS (r = 0.84; 95% confidence interval [CI], 0.72-0.91; p \u3c 0.001) and moderate positive correlation with the UE TESS (r = 0.64; 95% CI, 0.34-0.83; p = 0.055). The PROMIS Depression scores demonstrated a weak negative correlation with both the LE TESS (r = -0.38; 95% CI, -0.61 to -0.10; p = 0.010) and with UE TESS (r = -0.38; 95% CI, -0.67 to -0.01; p = 0.055). The PROMIS Pain Interference scores demonstrated a strong negative correlation with the LE TESS (r = -0.71; 95% CI, -0.83 to -0.52; p \u3c 0.001) and a moderate negative correlation with the UE TESS (r = -0.62; 95% CI, -0.81 to -0.30; p = 0.001). (3) The UE TESS had a range of scores from 16 to 100 with a 27% ceiling effect and no floor effect, and the LE TESS had a range from 10 to 98 with no floor or ceiling effect. There was no floor or ceiling effect for any PROMIS measures. Conclusions: In an orthopaedic oncology population, the PROMIS Physical Function and Pain Interference scores correlate with the TESS and have the benefit of reduced survey burden and ceiling effect. The PROMIS Depression scores may provide additional information regarding patient outcomes not captured by the TESS. Level of Evidence: Level III. The translational potential of this article: Patient reported outcome measures asses patients\u27 symptoms, function and health-related quality of life and are designed to capture more clinical information than can be gathered by objective medial testing alone. As reimbursements and the understanding of patient outcomes are becoming tied to performance on PROMIS measures, it is an important step to establish how PROMIS measures correlate and compare to traditional legacy measures

Surface treatment of glass vials for lyophilization: Implications for vacuum-induced surface freezing

Freeze-drying is commonly used to increase the shelf-life of pharmaceuticals and biopharmaceuticals. Freezing represents a crucial phase in the freeze-drying process, as it determines both cycle efficiency and product quality. For this reason, different strategies have been developed to allow for a better control of freezing, among them, the so-called vacuum-induced surface freezing (VISF), which makes it possible to trigger nucleation at the same time in all the vials being processed. We studied the effect of different vial types, characterized by the presence of hydrophilic (sulfate treatment) or hydrophobic (siliconization and TopLyo Si–O–C–H layer) inner coatings, on the application of VISF. We observed that hydrophobic coatings promoted boiling and blow-up phenomena, resulting in unacceptable aesthetic defects in the final product. In contrast, hydrophilic coatings increased the risk of fogging (i.e., the undesired creeping of the product upward along the inner vial surface). We also found that the addition of a surfactant (Tween 80) to the formulation suppressed boiling in hydrophobic-coated vials, but it enhanced the formation of bubbles. This undesired bubbling events induced by the surfactant could, however, be eliminated by a degassing step prior to the application of VISF. Overall, the combination of degasification and surfactant addition seems to be a promising strategy for the successful induction of nucleation by VISF in hydrophobic vials

Mechanical Design of the SMC (Short Model Coil) Dipole Magnet

The Short Model Coil (SMC) working group was set in February 2007 within the Next European Dipole (NED) program, in order to develop a short-scale model of a Nb$_{3}$Sn dipole magnet. The SMC group comprises four laboratories: CERN/TE-MSC group (CH), CEA/IRFU (FR), RAL (UK) and LBNL (US). The SMC magnet was originally conceived to reach a peak field of about 13 T on conductor, using a 2500 A/mm2 Powder-In-Tube (PIT) strand. The aim of this magnet device is to study the degradation of the magnetic properties of the Nb$_{3}$Sn cable, by applying different level of pre-stress. To fully satisfy this purpose, a versatile and easy-to-assemble structure has to be realized. The design of the SMC magnet has been developed from an existing dipole magnet, the SD01, designed, built and tested at LBNL with support from CEA. In this paper we will describe the mechanical optimization of the dipole, starting from a conceptual configuration based on a former magnetic analysis. Two and three-dimensional Finite Element Method (FEM) models have been implemented in ANSYS™ and in CAST3M, aiming at setting the mechanical parameters of the dipole magnet structure, thus fulfilling the design constraints imposed by the materials

Red Alert: a cognitive countermeasure to mitigate attentional tunneling

Attentional tunneling, that is the inability to detect unexpected changes in the environment, has been shown to have critical consequences in air traffic control. The motivation of this study was to assess the design of a cognitive countermeasure dedicated to mitigate such failure of attention. The Red Alert cognitive countermeasure relies on a brief orange-red flash (300 ms) that masks the entire screen with a 15% opacity. Twenty-two air traffic controllers faced two demanding scenarios, with or without the cognitive countermeasure. The volunteers were not told about the Red Alert so as to assess the intuitiveness of the design without prior knowledge. Behavioral results indicated that the cognitive countermeasure reduced reaction time and improved the detection of the notification when compared to the classical operational design. Further analyses showed this effect was even stronger for half of our participants (91.7% detection rate) who intuitively understood the purpose of this design

VLBA determination of the distance to nearby star-forming regions I. The distance to T Tauri with 0.4% accuracy

In this article, we present the results of a series of twelve 3.6-cm radio continuum observations of T Tau Sb, one of the companions of the famous young stellar object T Tauri. The data were collected roughly every two months between September 2003 and July 2005 with the Very Long Baseline Array (VLBA). Thanks to the remarkably accurate astrometry delivered by the VLBA, the absolute position of T Tau Sb could be measured with a precision typically better than about 100 micro-arcseconds at each of the twelve observed epochs. The trajectory of T Tau Sb on the plane of the sky could, therefore, be traced very precisely, and modeled as the superposition of the trigonometric parallax of the source and an accelerated proper motion. The best fit yields a distance to T Tau Sb of 147.6 +/- 0.6 pc. The observed positions of T Tau Sb are in good agreement with recent infrared measurements, but seem to favor a somewhat longer orbital period than that recently reported by Duchene et al. (2006) for the T Tau Sa/T Tau Sb system.Comment: 24 pages, 3 pages, AASTEX format, accepted for publication in Ap