29 research outputs found
Thermoresponsive and Mechanical Properties of Poly(
Gelation of the left helical N-substituted homopolypeptide poly(l-proline) (PLP) in water was explored, employing rheological and small-angle scattering studies at different temperatures and concentrations in order to investigate the network structure and its mechanical properties. Stiff gels were obtained at 10 wt % or higher at 5 Ā°C, the first time gelation has been observed for homopolypeptides. The secondary structure and helical rigidity of PLP has large structural similarities to gelatin but as gels the two materials show contrasting trends with temperature. With increasing temperature in DāO, the network stiffens, with broad scattering features of similar correlation length for all concentrations and molar masses of PLP. A thermoresponsive transition was also achieved between 5 and 35 Ā°C, with moduli at 35 Ā°C higher than gelatin at 5 Ā°C. The brittle gels could tolerate strains of 1% before yielding with a frequency-independent modulus over the observed range, similar to natural proline-rich proteins, suggesting the potential for thermoresponsive or biomaterial-based applications.United States. Army Research Office (W911NF-13-D-0001)United States. National Institutes of Health (NIH/NIGMS 5T32GM008334
Endovascular Embolization by Transcatheter Delivery of Particles: Past, Present, and Future.
Minimally invasive techniques to occlude flow within blood vessels, initially pioneered in the 1970s with autologous materials and subsequently advanced with increasingly sophisticated engineered biomaterials, are routinely performed for a variety of medical conditions. Contemporary interventional radiologists have at their disposal a wide armamentarium of occlusive agents to treat a range of disease processes through a small incision in the skin. In this review, we provide a historical perspective on endovascular embolization tools, summarize the current state-of-the-art, and highlight burgeoning technologies that promise to advance the field in the near future
Toughening of Thermoresponsive Arrested Networks of Elastin-Like Polypeptides To Engineer Cytocompatible Tissue Scaffolds
Formulation of tissue engineering or regenerative scaffolds from simple bioactive polymers with tunable structure and mechanics is crucial for the regeneration of complex tissues, and hydrogels from recombinant proteins, such as elastin-like polypeptides (ELPs), are promising platforms to support these applications. The arrested phase separation of ELPs has been shown to yield remarkably stiff, biocontinuous, nanostructured networks, but these gels are limited in applications by their relatively brittle nature. Here, a gel-forming ELP is chain-extended by telechelic oxidative coupling, forming extensible, tough hydrogels. Small angle scattering indicates that the chain-extended polypeptides form a fractal network of nanoscale aggregates over a broad concentration range, accessing moduli ranging from 5 kPa to over 1 MPa over a concentration range of 5ā30 wt %. These networks exhibited excellent erosion resistance and allowed for the diffusion and release of encapsulated particles consistent with a bicontinuous, porous structure with a broad distribution of pore sizes. Biofunctionalized, toughened networks were found to maintain the viability of human mesenchymal stem cells (hMSCs) in 2D, demonstrating signs of osteogenesis even in cell media without osteogenic molecules. Furthermore, chondrocytes could be readily mixed into these gels via thermoresponsive assembly and remained viable in extended culture. These studies demonstrate the ability to engineer ELP-based arrested physical networks on the molecular level to form reinforced, cytocompatible hydrogel matrices, supporting the promise of these new materials as candidates for the engineering and regeneration of stiff tissues
Recommended from our members
Large-scale ozone and aerosol distributions, air mass characteristics, and ozone fluxes over the western Pacific Ocean in late winter/early spring
Largeāscale measurements of ozone (O3) and aerosol distributions were made from the NASA DCā8 aircraft during the Transport and Chemical Evolution over the Pacific (TRACEāP) field experiment conducted in FebruaryāApril 2001. Remote measurements were made with an airborne lidar to provide O3 and multipleāwavelength aerosol backscatter profiles from near the surface to above the tropopause along the flight track. In situ measurements of O3, aerosols, and a wide range of trace gases were made onboard the DCā8. Fiveāday backward trajectories were used in conjunction with the O3 and aerosol distributions on each flight to indicate the possible origin of observed air masses, such as from biomass burning regions, continental pollution, desert regions, and oceanic regions. Average latitudinal O3 and aerosol scattering ratio distributions were derived from all flights west of 150Ā°E, and these distributions showed the average latitude and altitude dependence of different dynamical and chemical processes in determining the atmospheric composition over the western Pacific. TRACEāP (TP) showed an increase in the average latitudinal distributions of both O3 and aerosols compared to PEMāWest B (PWB), which was conducted in FebruaryāMarch 1994. O3, aerosol, and potential vorticity levels were used to identify nine air mass types and quantify their frequency of occurrence as a function of altitude. This paper discusses the characteristics of the different air mass types encountered during TP and compares them to PWB. These results confirmed that most of the O3 increase in TP was due to photochemistry. The average latitudinal eastward O3 flux in the western Pacific during TP was found to peak near 32Ā°N with a total average O3 flux between 14 and 46Ā°N of 5.2 Tg/day. The eastward total CO flux was calculated to be 2.2 TgāC/day with ā¼6% estimated from Asia. The Asian flux of CO2 and CH4 was estimated at 4.9 and 0.06 TgāC/day
Shear-Thinning Nanocomposite Hydrogels for the Treatment of Hemorrhage
Internal hemorrhaging is a leading cause of death after traumatic injury on the battlefield. Although several surgical approaches such as the use of fibrin glue and tissue adhesive have been commercialized to achieve hemostasis, these approaches are difficult to employ on the battlefield and cannot be used for incompressible wounds. Here, we present shear-thinning nanocomposite hydrogels composed of synthetic silicate nanoplatelets and gelatin as injectable hemostatic agents. These materials are demonstrated to decrease in vitro blood clotting times by 77%, and to form stable clot-gel systems. In vivo tests indicated that the nanocomposites are biocompatible and capable of promoting hemostasis in an otherwise lethal liver laceration. The combination of injectability, rapid mechanical recovery, physiological stability, and the ability to promote coagulation result in a hemostat for treating incompressible wounds in out-of-hospital, emergency conditions.United States. Army Research Office (Contract W911NF-13-D-0001)National Institutes of Health (U.S.) (Interdepartmental Biotechnology Training Program NIH/NIGMS 5T32GM008334
Design and performance of hemostatic biomaterials for managing hemorrhaging
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Biological Engineering, 2018.Cataloged from PDF version of thesis.Includes bibliographical references.The high mortality rates associated with uncontrolled bleeding motivate hemostatic material development for traumatic injuries. Uncontrolled, or hemorrhagic, internal bleeding requires hemostatic materials that can be directly delivered to or target the bleeding locations. To address these needs, injectable systems are being developed that: (1) generate artificial clots independent of the coagulation cascade or (2) interact with blood components to accelerate or otherwise improve coagulation processes. Hemostatic materials designed for internal bleeding can save lives in the battlefield, en route to emergency rooms, and in the operating room. This thesis first focuses on developing a shear-thinning hydrogel for injection onto bleeding surfaces and into ruptured vasculature. Based on in vitro assays of hydrogel performance, it was amenable to clinical delivery methods and reduced whole blood clotting times by 77%. In vivo bleeding models showed reduced blood loss and improved survival rates following a lethal liver injury. The hydrogel was also used as an embolic agent, where its occlusive potential in an anticoagulated model was demonstrated. Next, recombinant protein-based hemostatic materials were expressed to modulate clotting kinetics and performance. By incorporating clot interacting peptide sequences (CIPs) into a protein scaffold, a family of multifunctional fibrinogen like proteins (MFLPs) was developed and assayed. Clot turbidity, an indication of fibrin clot formation, was increased among enzyme-interacting CIPs. Mimicking the polymerization mechanism of fibrinogen, knob sequences were shown to be procoagulant at low concentrations by increasing clot turbidity, reducing clotting times, and inhibiting plasmin lysis. Finally, to understand the impact of hemostats on clot structure, imaging procedures were developed to systematically assess hemostatic materials and their influence on clot architecture. Static and dynamic approaches were developed to quantify the activity of hemostats based on the spatial distribution of fibrinogen, red blood cells, and platelets around hemostat surfaces. Quantification of these hemostat-blood component interactions resulted in a unique pattern of interactions for each hemostat studied. These techniques could serve as a screening technique for hemostats and improve characterization prior to in vivo assays. Taken together, the results highlight multiple approaches to address internal bleeding and opportunities to improve in vitro characterization of hemostats using microscopy.by Reginald Keith Avery.Ph. D
Feasibility and comparison of visual acuity testing methods in children with neurofibromatosis type 1 and/or optic pathway gliomas
Toughening of Thermoresponsive Arrested Networks of Elastin-Like Polypeptides To Engineer Cytocompatible Tissue Scaffolds
Recommended from our members
Endovascular Embolization by Transcatheter Delivery of Particles: Past, Present, and Future.
Minimally invasive techniques to occlude flow within blood vessels, initially pioneered in the 1970s with autologous materials and subsequently advanced with increasingly sophisticated engineered biomaterials, are routinely performed for a variety of medical conditions. Contemporary interventional radiologists have at their disposal a wide armamentarium of occlusive agents to treat a range of disease processes through a small incision in the skin. In this review, we provide a historical perspective on endovascular embolization tools, summarize the current state-of-the-art, and highlight burgeoning technologies that promise to advance the field in the near future