Dealloying of Platinum-Aluminum Thin Films Part II. Electrode Performance

Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell setup at elevated temperatures. During initial heating to 523 K exceptionally high performances compared to conventional Pt thin film electrodes were measured. This results from the high internal surface area and large three phase boundary length obtained by the dealloying process. Exposure to elevated temperatures of 673 K or 873 K gave rise to degradation of the electrode performance, which was primarily attributed to the oxidation of remaining Al in the thin films.Comment: 5 pages, 4 figure

Dealloying of Platinum-Aluminum Thin Films Part I. Dynamics of Pattern Formation

Applying focused ion beam (FIB) nanotomography and Rutherford backscattering spectroscopy (RBS) to dealloyed platinum-aluminum thin films an in-depth analysis of the dominating physical mechanisms of porosity formation during the dealloying process is performed. The dynamical porosity formation due to the dissolution of the less noble aluminum in the alloy is treated as result of a reaction-diffusion system. The RBS analysis yields that the porosity formation is mainly caused by a linearly propagating diffusion front, i.e. the liquid/solid interface, with a uniform speed of 42(3) nm/s when using a 4M aqueous NaOH solution at room temperature. The experimentally observed front evolution is captured by the normal diffusive Fisher-Kolmogorov-Petrovskii-Piskounov (FKPP) equation and can be interpreted as a branching random walk phenomenon. The etching front produces a gradual porosity with an enhanced porosity in the surface-near regions of the thin film due to prolonged exposure of the alloy to the alkaline solution.Comment: 4 pages, 5 figure

Concave Plasmonic Particles: Broad-Band Geometrical Tunability in the Near Infra-Red

Optical resonances spanning the Near and Short Infra-Red spectral regime were exhibited experimentally by arrays of plasmonic nano-particles with concave cross-section. The concavity of the particle was shown to be the key ingredient for enabling the broad band tunability of the resonance frequency, even for particles with dimensional aspect ratios of order unity. The atypical flexibility of setting the resonance wavelength is shown to stem from a unique interplay of local geometry with surface charge distributions

Editorial: Videos in der (Hochschul-)Lehre

24.04.2014 | Thomas Antretter, Johannes Dorfinger, Martin Ebner, Michael Kopp, Walther Nagler, Jutta Pauschenwein, Michael Raunig, Manfred Rechberger, Herwig Rehatschek, Patrick Schweighofer, Reinhard Staber & Martin Teufel (Graz

Clustering of 27,525,663 death records from the United States based on health conditions associated with death: an example of big health data exploration

Background: Insight into health conditions associated with death can inform healthcare policy. We aimed to cluster 27,525,663 deceased people based on the health conditions associated with death to study the associations between the health condition clusters, demographics, the recorded underlying cause and place of death. Methods: Data from all deaths in the United States registered between 2006 and 2016 from the National Vital Statistics System of the National Center for Health Statistics were analyzed. A self-organizing map (SOM) was used to create an ordered representation of the mortality data. Results: 16 clusters based on the health conditions associated with death were found showing significant differences in socio-demographics, place, and cause of death. Most people died at old age (73.1 (18.0) years) and had multiple health conditions. Chronic ischemic heart disease was the main cause of death. Most people died in the hospital or at home. Conclusions: The prevalence of multiple health conditions at death requires a shift from disease-oriented towards person-centred palliative care at the end of life, including timely advance care planning. Understanding differences in population-based patterns and clusters of end-of-life experiences is an important step toward developing a strategy for implementing population-based palliative care

Dexketoprofen/tramadol 25 mg/75 mg: randomised double-blind trial in moderate-to-severe acute pain after abdominal hysterectomy

Statistical Analysis of TOTPAR over 2, 4, 6 and 8 h (ANCOVA) (ITT Population) (single-dose phase). (DOCX 16 kb

Favorable Mixing Thermodynamics in Ternary Polymer Blends for Realizing High Efficiency Plastic Solar Cells

Ternary blends with broad spectral absorption have the potential to increase charge generation in organic solar cells but feature additional complexity due to limited intermixing and electronic mismatch. Here, a model system comprising the polymers poly[5,5-bis(2-butyloctyl)-(2,2-bithiophene)-4,4-dicarboxylate-alt-5,5-2,2-bithiophene] (PDCBT) and PTB7-Th and PC70BM as an electron accepting unit is presented. The power conversion efficiency (PCE) of the ternary system clearly surpasses the performance of either of the binary systems. The photophysics is governed by a fast energy transfer process from PDCBT to PTB7-Th, followed by electron transfer at the PTB7-Th:fullerene interface. The morphological motif in the ternary blend is characterized by polymer fibers. Based on a combination of photophysical analysis, GIWAXS measurements and calculation of the intermolecular parameter, the latter indicating a very favorable molecular affinity between PDCBT and PTB7-Th, it is proposed that an efficient charge generation mechanism is possible because PTB7-Th predominantly orients around PDCBT filaments, allowing energy to be effectively relayed from PDCBT to PTB7-Th. Fullerene can be replaced by a nonfullerene acceptor without sacrifices in charge generation, achieving a PCE above 11%. These results support the idea that thermodynamic mixing and energetics of the polymer-polymer interface are critical design parameter for realizing highly efficient ternary solar cells with variable electron acceptors

Development of robust metal-supported SOFCs and stack components in EU METSAPP consortium

The potential of MS-SOFCs was demonstrated through the previous EU METSOFC project, which concluded that the development of oxidation resistant novel metal-supported solid oxide fule cell (MS-SOFC) design and stack is the requirement to advance this technology to the next level. The following EU METSAPP project has been executed with an overall aim of developing advanced metal-supported cells and stacks based on a robust, reliable and up-scalable technology. During the project, oxidation resistant nanostructured anodes based on modified SrTiO3 were developed and integrated into MS-SOFCs to enhance their robustness. In addition, the manufacturing of metal-supported cells with different geometries, scalability of the manufacturing process was demonstrated and more than 200 cells with an area of ∼150 cm2 were produced. The electrochemical performance of different cell generations was evaluated and best performance and stability combination was observed with doped SrTiO3 based anode designs. Furthermore, numerical models to understand the corrosion behavior of the MS-SOFCs were developed and validated. Finally, the cost effective concept of coated metal interconnects was developed, which resulted in 90% reduction in Cr evaporation, three times lower Cr2O3 scale thickness and increased lifetime. The possibility of assembling these cells into two radically different stack designs was demonstrated