154 research outputs found
Chancen und Grenzen der Biofumigation für die Bekämpfung pflanzenparasitärer Nematoden
Biofumigation is considered a promising nematode control alternative. In vitro tests
confirmed the high nematicidal properties of isothiocyanates, the driving compounds
of biofumigation. Its potential under temperate climate conditions was tested on a
commercial farm. The tested biofumigation treatments reduced population densities of
Pratylenchus spp. but had little effect on Meloidogyne hapla. The latter was most likely
due to the good status of the tested varieties. To further optimize the biofumigation
system non-host crops with high concentration of glucosinolates have to be selected
The metrology system of the VLTI instrument GRAVITY
The VLTI instrument GRAVITY combines the beams from four telescopes and
provides phase-referenced imaging as well as precision-astrometry of order 10
microarcseconds by observing two celestial objects in dual-field mode. Their
angular separation can be determined from their differential OPD (dOPD) when
the internal dOPDs in the interferometer are known. Here, we present the
general overview of the novel metrology system which performs these
measurements. The metrology consists of a three-beam laser system and a
homodyne detection scheme for three-beam interference using phase-shifting
interferometry in combination with lock-in amplifiers. Via this approach the
metrology system measures dOPDs on a nanometer-level.Comment: 9 pages, 5 figure
Testing general relativity with accretion onto compact objects
The X-ray emission of neutron stars and black holes presents a rich
phenomenology that can lead us to a better understanding of their nature and to
address more general physics questions: Does general relativity apply in the
strong gravity regime? Is spacetime around black holes described by the Kerr
metric? This white paper considers how we can investigate these questions by
studying reverberation mapping and quasi-periodic oscillations in accreting
systems with a combination of high-spectral and high-timing resolution. In the
near future, we will be able to study compact objects in the X-rays in a new
way: advancements in transition-edge sensors (TES) technology will allow for
electron-volt-resolution spectroscopy combined with nanoseconds-precision
timing.Comment: White paper submitted for Astro2020 Decadal Survey. 8 pages, 2
figure
Modeling the Effects of Introducing Low Impact Development in a Tropical City: a Case Study from Joinville, Brazil
In tropical countries like Brazil, fast and uncontrolled urbanization, together with high rainfall intensities, makes flooding a frequent event. The implementation of decentralized stormwater controls is a promising strategy aiming to reduce surface runoff and pollution through retention, infiltration, filtration, and evapotranspiration of stormwater. Although the application of such controls has increased in the past years in developed countries, they are still not a common approach in developing countries, such as Brazil. In this paper we evaluate to what extend different low impact development (LID) techniques are able to reduce the flood risk in an area of high rainfall intensities in a coastal region of South Brazil. Feasible scenarios of placing LID units throughout the catchment were developed, analyzed with a hydrodynamic solver, and compared against the baseline scenario to evaluate the potential of flood mitigation. Results show that the performance improvements of different LID scenarios are highly dependent on the rainfall events. On average, a total flood volume reduction between 30% and 75% could be achieved for seven LID scenarios. For this case study the best results were obtained when using a combination of central and decentral LID units, namely detention ponds, infiltration trenches, and rain gardens.(VLID)2512613Version of recor
Liver resection or combined chemoembolization and radiofrequency ablation improve survival in patients with hepatocellular carcinoma
Background/ Aims: To evaluate the long-term outcome of surgical and non-surgical local treatments of patients with hepatocellular carcinoma (HCC). Methods: We stratified a cohort of 278 HCC patients using six independent predictors of survival according to the Vienna survival model for HCC (VISUM- HCC). Results: Prior to therapy, 224 HCC patients presented with VISUM stage 1 (median survival 18 months) while 29 patients were classified as VISUM stage 2 (median survival 4 months) and 25 patients as VISUM stage 3 (median survival 3 months). A highly significant (p < 0.001) improved survival time was observed in VISUM stage 1 patients treated with liver resection ( n = 52; median survival 37 months) or chemoembolization (TACE) and subsequent radiofrequency ablation ( RFA) ( n = 44; median survival 45 months) as compared to patients receiving chemoembolization alone (n = 107; median survival 13 months) or patients treated by tamoxifen only (n = 21; median survival 6 months). Chemoembolization alone significantly (p <= 0.004) improved survival time in VISUM stage 1 - 2 patients but not (p = 0.341) in VISUM stage 3 patients in comparison to those treated by tamoxifen. Conclusion: Both liver resection or combined chemoembolization and RFA improve markedly the survival of patients with HCC
Технологическая подготовка производства изготовления детали "Ступица" на станках с ЧПУ
В данной выпускной квалификационной работе рассмотриваются вопросы технологической подготовки производства детали "Ступица".ТПП включает в себя анализ технологичности, выбор способа получения заготовки, расчет припусков на обработку детали, проектирование технологического процесса, выбор технологического оснащения, кроме того был произведен расчет технико-экономических показателей технологического процесса и социальная ответственность на производстве.In this final qualification work, the issues of technological preparation for the production of the “Hub” part are considered. The TPP includes an analysis of manufacturability, a choice of the method for producing the workpiece, calculation of allowances for processing the part, design of the technological process, the choice of technological equipment, in addition, the calculation of technical and economic indicators technological process and social responsibility in the workplace
- …