Use of Frequency Distribution Functions to Establish Safe Conditions in Relation to the Foodborne Pathogen Bacillus cereus

Minimal processing implementation greatly depends on a detailed knowledge of the effects of preservation factors and their combinations on the spoilage and foodborne pathogenic microorganisms. The effectiveness of mild preservation conditions will become increasingly dependent on a more stochastic approach linking microbial physiological factors with product preservation factors. In this study, the validity of frequency distributions to efficiently describe the inactivation and growth of Bacillus cereus in the presence of natural antimicrobials (essential oils) has been studied. For this purpose, vegetative cells were exposed to 0.6 mM of thymol or cymene, obtaining survival curves that were best described by the distribution of Weibull, since a tailing effect was observed. B. cereus was also exposed in a growth medium to a low concentration (0.1 mM) of both antimicrobials, separately or combined, and the lag times obtained were fitted to a normal distribution, which allowed a description of dispersion of the start of growth. This allowed a more efficient evaluation of the experimental data to establish safe processing conditions according to accurate parameters and their implementation in risk assessment

In Situ Heavy Metal Accumulation in Lettuce Growing Near a Former Mining Waste Disposal Area: Implications for Agricultural Management

Mining wastes may pose risk nearby urban and agricultural areas. We investigated a lettuce crop land close to a former capped mine tailing in order to determinate the metal uptake by crops. Soil plot sampling design within the crop area and two transects along the tailing were performed. In addition, lettuces (root and leaves) were analyzed after transplant and harvest. The results showed a pH of around 7-8 for all the soil samples. Total metal concentrations were as follows: 190-510mgkg−1 Pb, 13-21mgkg−1 Cu, and 210-910mgkg−1 Zn. Diethylene triamine pentaacetic acid-extractable Pb was around 18% of the total Pb in some samples. Transects along the base and on the plateau of the tailing showed high metal concentrations of Pb (up to 5,800mgkg−1) and Zn (up to 4,500mgkg−1), indicating that capping layer had been eroded. Lettuce leaves showed Pb concentrations within standard for human health (<0.3mgkg−1 in fresh weight). For essential micronutrients such as Cu and Zn, leaves had optimal content (10-28mgkg−1 Cu, 60-85mgkg−1 Zn). A continued monitoring in metal uptake is needed in crop lands close to mining wastes in order to prevent risks in food safety. Capped tailings must be monitored and rehabilitation works performed from time to tim

V-substituted In2S3: an intermediate band material with photocatalytic activity in the whole visible light range

We proposed in our previous work V-substituted In2S3 as an intermediate band (IB) material able to enhance the efficiency of photovoltaic cells by combining two photons to achieve a higher energy electron excitation, much like natural photosynthesis. Here this hyper-doped material is tested in a photocatalytic reaction using wavelength-controlled light. The results evidence its ability to use photons with wavelengths of up to 750 nm, i.e. with energy significantly lower than the bandgap (=2.0 eV) of non-substituted In2S3, driving with them the photocatalytic reaction at rates comparable to those of non-substituted In2S3 in its photoactivity range (λ ≤ 650 nm). Photoluminescence spectra evidence that the same bandgap excitation as in V-free In2S3 occurs in V-substituted In2S3 upon illumination with photons in the same sub-bandgap energy range which is effective in photocatalysis, and its linear dependence on light intensity proves that this is not due to a nonlinear optical property. This evidences for the first time that a two-photon process can be active in photocatalysis in a single-phase material. Quantum calculations using GW-type many-body perturbation theory suggest that the new band introduced in the In2S3 gap by V insertion is located closer to the conduction band than to the valence band, so that hot carriers produced by the two-photon process would be of electron type; they also show that the absorption coefficients of both transitions involving the IB are of significant and similar magnitude. The results imply that V-substituted In2S3, besides being photocatalytically active in the whole visible light range (a property which could be used for the production of solar fuels), could make possible photovoltaic cells of improved efficiency

Synthesis and characterization of transition metal-subtituted indium thiospinels as intermediate band materials for high efficiency solar cells

It was recently proposed that higher efficiency can be achieved in PV cells having a single-absorbent if for the latter an intermediate band (IB) material is used which contains a partially filled, isolated band within the gap of an otherwise normal semiconductor. In2S3 and related compounds in which octahedrally coordinated In is substituted by a light transition metal are IB material candidates according to solid state chemistry concepts, this having been confirmed by quantum calculations. Here materials of this type have been chemically synthesized in powder form using wet solvothermal methods. Especially for vanadium-substituted In2S3 , incorporation of the metal into the lattice is supported by XRD and TEM data, and only minor oxidation of vanadium from the V III state to the V IV state is evidenced by EPR. New sub-bandgap features appear in the diffuse reflectance optical spectra upon incorporation of vanadium; these coincide with the spectra that had been predicted by the quantum calculations as corresponding to the IB electronic structure. The realization of the IB concept in a single compound, that furthermore should be easy to prepare in the form needed for PV thin film cells, is thus achieved for the first time

New Intermediate band sulphide nanoparticles acting in the full visible light range spectra as an active photocatalyst

Nowadays one of the challenges of materials science is to find new technologies that will be able to make the most of renewable energies. An example of new proposals in this field are the intermediate-band (IB) materials, which promise higher efficiencies in photovoltaic applications (through the intermediate band solar cells), or in heterogeneous photocatalysis (using nanoparticles of them, for the light-induced degradation of pollutants or for the efficient photoevolution of hydrogen from water). An IB material consists in a semiconductor in which gap a new level is introduced [1], the intermediate band (IB), which should be partially filled by electrons and completely separated of the valence band (VB) and of the conduction band (CB). This scheme (figure 1) allows an electron from the VB to be promoted to the IB, and from the latter to the CB, upon absorption of photons with energy below the band gap Eg, so that energy can be absorbed in a wider range of the solar spectrum and a higher current can be obtained without sacrificing the photovoltage (or the chemical driving force) corresponding to the full bandgap Eg, thus increasing the overall efficiency. This concept, applied to photocatalysis, would allow using photons of a wider visible range while keeping the same redox capacity. It is important to note that this concept differs from the classic photocatalyst doping principle, which essentially tries just to decrease the bandgap. This new type of materials would keep the full bandgap potential but would use also lower energy photons. In our group several IB materials have been proposed, mainly for the photovoltaic application, based on extensively doping known semiconductors with transition metals [2], examining with DFT calculations their electronic structures. Here we refer to In2S3 and SnS2, which contain octahedral cations; when doped with Ti or V an IB is formed according to quantum calculations (see e.g. figure 2). We have used a solvotermal synthesis method to prepare in nanocrystalline form the In2S3 thiospinel and the layered compound SnS2 (which when undoped have bandgaps of 2.0 and 2.2 eV respectively) where the cation is substituted by vanadium at a ?10% level. This substitution has been studied, characterizing the materials by different physical and chemical techniques (TXRF, XRD, HR-TEM/EDS) (see e.g. figure 3) and verifying with UV spectrometry that this substitution introduces in the spectrum the sub-bandgap features predicted by the calculations (figure 4). For both sulphide type nanoparticles (doped and undoped) the photocatalytic activity was studied by following at room temperature the oxidation of formic acid in aqueous suspension, a simple reaction which is easily monitored by UV-Vis spectroscopy. The spectral response of the process is measured using a collection of band pass filters that allow only some wavelengths into the reaction system. Thanks to this method the spectral range in which the materials are active in the photodecomposition (which coincides with the band gap for the undoped samples) can be checked, proving that for the vanadium substituted samples this range is increased, making possible to cover all the visible light range. Furthermore it is checked that these new materials are more photocorrosion resistant than the toxic CdS witch is a well know compound frequently used in tests of visible light photocatalysis. These materials are thus promising not only for degradation of pollutants (or for photovoltaic cells) but also for efficient photoevolution of hydrogen from water; work in this direction is now being pursued

Sulfuros fotocatalizadores que utilizan ampliamente el espectro de luz visible

Cuando se usa fotocatálisis, tanto para procesos de descontaminación como para síntesis química específica y (especialmente) para aprovechamiento de energía solar, importa aprovechar un rango muy amplio de luz visible. Para ello se estudian hoy principalmente óxidos (con o sin adición de aniones que disminuyen el gap como el nitrógeno); los sulfuros, como el bien conocido CdS, tienen estabilidad limitada, sobre todo para procesos de fotooxidación en presencia de agua en los que sufren corrosión. Aquí se presentan estudios sobre sulfuros como el In2S3 y el SnS2 (con bandgaps respectivos de 2.0 y 2.2 eV [1]) cuyos metales tienen mayor valencia y coordinación octaédrica, y en los que por ambos factores cabe suponer que su red cristalina, más compacta, tendrá mayor estabilidad. Se muestra también que mediante un dopado importante con vanadio se puede extender su rango espectral de fotoactividad, lo que se atribuye a la formación de una banda intermedia que posibilita el uso de dos fotones con energía inferior al bandgap para conseguir una excitación completa en el semiconductor; este proceso ha sido propuesto últimamente para aumentar el rendimiento de las células fotovoltaicas

Vanadium-Doped In and Sn Sulphides: Photocatalysts able to use the whole visible light spectrum

Using photocatalysis for energy applications depends, more than for environmental purposes or selective chemical synthesis, on converting as much of the solar spectrum as possible; the best photocatalyst, titania, is far from this. Many efforts are pursued to use better that spectrum in photocatalysis, by doping titania or using other materials (mainly oxides, nitrides and sulphides) to obtain a lower bandgap, even if this means decreasing the chemical potential of the electron-hole pairs. Here we introduce an alternative scheme, using an idea recently proposed for photovoltaics: the intermediate band (IB) materials. It consists in introducing in the gap of a semiconductor an intermediate level which, acting like a stepstone, allows an electron jumping from the valence band to the conduction band in two steps, each one absorbing one sub-bandgap photon. For this the IB must be partially filled, to allow both sub-bandgap transitions to proceed at comparable rates; must be made of delocalized states to minimize nonradiative recombination; and should not communicate electronically with the outer world. For photovoltaic use the optimum efficiency so achievable, over 1.5 times that given by a normal semiconductor, is obtained with an overall bandgap around 2.0 eV (which would be near-optimal also for water phtosplitting). Note that this scheme differs from the doping principle usually considered in photocatalysis, which just tries to decrease the bandgap; its aim is to keep the full bandgap chemical potential but using also lower energy photons. In the past we have proposed several IB materials based on extensively doping known semiconductors with light transition metals, checking first of all with quantum calculations that the desired IB structure results. Subsequently we have synthesized in powder form two of them: the thiospinel In2S3 and the layered compound SnS2 (having bandgaps of 2.0 and 2.2 eV respectively) where the octahedral cation is substituted at a â?10% level with vanadium, and we have verified that this substitution introduces in the absorption spectrum the sub-bandgap features predicted by the calculations. With these materials we have verified, using a simple reaction (formic acid oxidation), that the photocatalytic spectral response is indeed extended to longer wavelengths, being able to use even 700 nm photons, without largely degrading the response for above-bandgap photons (i.e. strong recombination is not induced) [3b, 4]. These materials are thus promising for efficient photoevolution of hydrogen from water; work on this is being pursued, the results of which will be presented

New materials for intermediate band photovoltaic cells. A theoretical and experimental approach

Density functional theory calculations of certain transition-metal doped semiconductors show a partially occupied relatively narrow band located between valence band and conduction band. These novel systems, containing the metallic band, are called intermediate-band materials. They have enhanced optoelectronic properties which allow an increase in solar energy conversion efficiency of conventional solar cells. We previously proposed III-V, chalcopyrite and sulfide derived compounds showing desirable characteristics to produce the intermediate band of interest inside the band-gap. In order to obtain further intermediate-band material proposals, this work focuses on studing other compounds constituted mainly by tetravalent elements. The first proposal is vanadium substituting Sn atoms in SnS2 , the second one is composed by type II silicon clathrate with two possibilities: vanadium substituting Si and Ag occluded in the intra-crystalline cavities. UV-Vis-NIR spectra of some of these systems experimentally synthesized show an agreement with previous theoretical prediction