Research of combustion in older generation spark-ignition engines in the condition of use leaded and unleaded petrol

This paper analyzes the potential problems in the exploitation of the older generation of spark-ignition engines with higher octane number of petrol (unleaded petrol BMB 95) than required (leaded petrol MB 86). Within the experimental tests on two different engines (STEYR-PUCH model 712 and GAZ 41) by applying piezoelectric pressure sensors integrated with the engine spark plugs, acceleration sensors and special electronic block connected with distributor, show that the cumulative first and second theoretical phase of combustion when petrol of higher octane number (BMB 95) is used lasts slightly longer than when the low-octane petrol MB 86 is used. For new petrol (BMB 95) higher optimal angles of pre-ignition have been determined by which better performances of the engine are achieved without a danger of the combustion with detonation (also called knocking)

Research of combustion in older generation spark-ignition engines in the condition of use leaded and unleaded petrol

This paper analyzes the potential problems in the exploitation of the older generation of spark-ignition engines with higher octane number of petrol (unleaded petrol BMB 95) than required (leaded petrol MB 86). Within the experimental tests on two different engines (STEYR-PUCH model 712 and GAZ 41) by applying piezoelectric pressure sensors integrated with the engine spark plugs, acceleration sensors and special electronic block connected with distributor, show that the cumulative first and second theoretical phase of combustion when petrol of higher octane number (BMB 95) is used lasts slightly longer than when the low-octane petrol MB 86 is used. For new petrol (BMB 95) higher optimal angles of pre-ignition have been determined by which better performances of the engine are achieved without a danger of the combustion with detonation (also called knocking)

Research of combustion in older generation spark-ignition engines in the condition of use leaded and unleaded petrol

This paper analyzes the potential problems in the exploitation of the older generation of spark-ignition engines with higher octane number of petrol (unleaded petrol BMB 95) than required (leaded petrol MB 86). Within the experimental tests on two different engines (STEYR-PUCH model 712 and GAZ 41) by applying piezoelectric pressure sensors integrated with the engine spark plugs, acceleration sensors (accelerometers) and special electronic block connected with distributor, show that the cumulative first and second theoretical phase of combustion when petrol of higher octane number (BMB 95) is used lasts slightly longer than when the low-octane petrol MB 86 is used. For new petrol (BMB 95) higher optimal angles of pre-ignition have been determined by which better performances of the engine are achieved without a danger of the combustion with detonation (also called knocking)

Diffuse reflectance imaging for non-melanoma skin cancer detection using laser feedback interferometry

We propose a compact, self-aligned, low-cost, and versatile infrared diffuse-reflectance laser imaging system using a laser feedback interferometry technique with possible applications in in vivo biological tissue imaging and skin cancer detection. We examine the proposed technique experimentally using a three-layer agar skin phantom. A cylindrical region with a scattering rate lower than that of the surrounding normal tissue was used as a model for a non-melanoma skin tumour. The same structure was implemented in a Monte Carlo computational model. The experimental results agree well with the Monte Carlo simulations validating the theoretical basis of the technique. Results prove the applicability of the proposed technique for biological tissue imaging, with the capability of depth sectioning and a penetration depth of well over 1.2 mm into the skin phantom

Measurement of the emission spectrum of a semiconductor laser using laser-feedback interferometry

The effects of optical feedback (OF) in lasers have been observed since the early days of laser development. While OF can result in undesirable and unpredictable operation in laser systems, it can also cause measurable perturbations to the operating parameters, which can be harnessed for metrological purposes. In this work we exploit this ‘self-mixing’ effect to infer the emission spectrum of a semiconductor laser using a laser-feedback interferometer, in which the terminal voltage of the laser is used to coherently sample the reinjected field. We demonstrate this approach using a terahertz frequency quantum cascade laser operating in both single- and multiple-longitudinal mode regimes, and are able to resolve spectral features not reliably resolved using traditional Fourier transform spectroscopy. We also investigate quantitatively the frequency perturbation of individual laser modes under OF, and find excellent agreement with predictions of the excess phase equation central to the theory of lasers under OF

Tunneling and propagation of vacuum bubbles on dynamical backgrounds

In the context of bubble universes produced by a first-order phase transition with large nucleation rates compared to the inverse dynamical time scale of the parent bubble, we extend the usual analysis to non-vacuum backgrounds. In particular, we provide semi-analytic and numerical results for the modified nucleation rate in FLRW backgrounds, as well as a parameter study of bubble walls propagating into inhomogeneous (LTB) or FLRW spacetimes, both in the thin-wall approximation. We show that in our model, matter in the background often prevents bubbles from successful expansion and forces them to collapse. For cases where they do expand, we give arguments why the effects on the interior spacetime are small for a wide range of reasonable parameters and discuss the limitations of the employed approximations.Comment: 29 pages, 8 figures, typos corrected, matches published versio

Detection sensitivity of laser feedback interferometry using a terahertz quantum cascade laser

We report on the high detection sensitivity of a laser feedback interferometry scheme based on a terahertz frequency quantum cascade laser. We show that variations on the laser voltage induced by optical feedback to the laser can be resolved with reinjection of powers as low as ~−125 dB of the emitted power. Our measurements demonstrate a noise equivalent power of ~1.4 pW/√Hz, although after accounting for reinjection losses we estimate this corresponds to only ~1 fW/√Hz being coupled to the quantum cascade laser active region

Device Optimization of Tris-Aluminum (Alq3) Based Bilayer Organic Light Emitting Diode Structures

In this work we present detailed analysis of the emitted radiation spectrum from tris(8-hydroxyquinoline) aluminum (Alq3) based bilayer OLEDs as a function of: the choice of cathode, the thickness of organic layers, and the position of the hole transport layer/Alq3 interface. The calculations fully take into account dispersion in the glass substrate, the indium tin oxide anode, and in the organic layers, as well as the dispersion in the metal cathode. Influence of the incoherent transparent substrate (1 mm glass substrate) is also fully accounted for. Four cathode structures have been considered: Mg/Ag, Ca/Ag, LiF/Al, and Ag. For the hole transport layer, N,N'-diphenyl-N,N'-(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) and N,N'-di(naphthalene-1-yl)-N,N'-diphenylbenzidine (NPB) were considered. As expected, emitted radiation is strongly dependent on the position of the emissive layer inside the cavity and its distance from the metal cathode. Although our optical model for an OLED does not explicitly include exciton quenching in vicinity of the metal cathode, designs placing the emissive layer near the cathode are excluded to avoid unrealistic results. Guidelines for designing devices with optimum emission efficiency are presented. Finally, several different devices were fabricated and characterized and experimental and calculated emission spectra were compared

Centralizer's applications to the (b, c)-inverses in rings

[EN] We give several conditions in order that the absorption law for one sided (b,c)-inverses in rings holds. Also, by using centralizers, we obtain the absorption law for the (b,c)-inverse and the reverse order law of the (b,c)-inverse in rings. As applications, we obtain the related results for the inverse along an element, Moore-Penrose inverse, Drazin inverse, group inverse and core inverse.This research is supported by the National Natural Science Foundation of China (no. 11771076 and no. 11871301). The first author is grateful to China Scholarship Council for giving him a scholarship for his further study in Universitat Politecnica de Valencia, Spain.Xu, S.; Chen, J.; Benítez López, J.; Wang, D. (2019). Centralizer's applications to the (b, c)-inverses in rings. Revista de la Real Academia de Ciencias Exactas, Físicas y Naturales. 113(3):1739-1746. https://doi.org/10.1007/s13398-018-0574-0S173917461133Baksalary, O.M., Trenkler, G.: Core inverse of matrices. Linear Multilinear Algebra 58(6), 681–697 (2010)Benítez, J., Boasso, E.: The inverse along an element in rings with an involution, Banach algebras and $$C^*$$ C ∗ -algebras. Linear Multilinear Algebra 65(2), 284–299 (2017)Benítez, J., Boasso, E., Jin, H.W.: On one-sided $$(B, C)$$ ( B , C ) -inverses of arbitrary matrices. Electron. J. Linear Algebra 32, 391–422 (2017)Boasso, E., Kantún-Montiel, G.: The $$(b, c)$$ ( b , c ) -inverses in rings and in the Banach context. Mediterr. J. Math. 14, 112 (2017)Chen, Q.G., Wang, D.G.: A class of coquasitriangular Hopf group algebras. Comm. Algebra 44(1), 310–335 (2016)Chen, J.L., Ke, Y.Y., Mosić, D.: The reverse order law of the $$(b, c)$$ ( b , c ) -inverse in semigroups. Acta Math. Hung. 151(1), 181–198 (2017)Deng, C.Y.: Reverse order law for the group inverses. J. Math. Anal. Appl. 382(2), 663–671 (2011)Drazin, M.P.: Pseudo-inverses in associative rings and semigroups. Am. Math. Mon. 65, 506–514 (1958)Drazin, M.P.: A class of outer generalized inverses. Linear Algebra Appl. 436, 1909–1923 (2012)Drazin, M.P.: Left and right generalized inverses. Linear Algebra Appl. 510, 64–78 (2016)Jin, H.W., Benítez, J.: The absorption laws for the generalized inverses in rings. Electron. J. Linear Algebra 30, 827–842 (2015)Johnson, B.E.: An introduction to the theory of centralizers. Proc. Lond. Math. Soc. 14, 299–320 (1964)Ke, Y.Y., Cvetković-Ilić, D.S., Chen, J.L., Višnjić, J.: New results on $$(b, c)$$ ( b , c ) -inverses. Linear Multilinear Algebra 66(3), 447–458 (2018)Ke Y.Y., Višnjić J., Chen J.L.: One sided $$(b,c)$$ ( b , c ) -inverse in rings (2016). arXiv:1607.06230v1Liu, X.J., Jin, H.W., Cvetković-Ilić, D.S.: The absorption laws for the generalized inverses. Appl. Math. Comput. 219, 2053–2059 (2012)Mary, X.: On generalized inverse and Green’s relations. Linear Algebra Appl. 434, 1836–1844 (2011)Mary, X., Patrício, P.: Generalized inverses modulo $$\cal{H}$$ H in semigroups and rings. Linear Multilinear Algebra 61(8), 1130–1135 (2013)Mosić, D., Cvetković-Ilić, D.S.: Reverse order law for the Moore-Penrose inverse in $$C^*$$ C ∗ -algebras. Electron. J. Linear Algebra 22, 92–111 (2011)Rakić, D.S.: A note on Rao and Mitra’s constrained inverse and Drazin’s $$(b, c)$$ ( b , c ) -inverse. Linear Algebra Appl. 523, 102–108 (2017)Rakić, D.S., Dinčić, N.Č., Djordjević, D.S.: Group, Moore–Penrose, core and dual core inverse in rings with involution. Linear Algebra Appl. 463, 115–133 (2014)Wang, L., Castro-González, N., Chen, J.L.: Characterizations of outer generalized inverses. Can. Math. Bull. 60(4), 861–871 (2017)Wei, Y.M.: A characterization and representation of the generalized inverse $$A^{(2)}_{T, S}$$ A T , S ( 2 ) and its applications. Linear Algebra Appl. 280, 87–96 (1998)Xu, S.Z., Benítez, J.: Existence criteria and expressions of the $$(b, c)$$ ( b , c ) -inverse in rings and its applications. Mediterr. J. Math. 15, 14 (2018)Zhu, H.H., Chen, J.L., Patrício, P.: Further results on the inverse along an element in semigroups and rings. Linear Multilinear Algebra 64(3), 393–403 (2016)Zhu, H.H., Chen, J.L., Patrício, P.: Reverse order law for the inverse along an element. Linear Multilinear Algebra 65, 166–177 (2017)Zhu, H.H., Chen, J.L., Patrício, P., Mary, X.: Centralizer’s applications to the inverse along an element. Appl. Math. Comput. 315, 27–33 (2017)Zhu, H.H., Zhang, X.X., Chen, J.L.: Centralizers and their applications to generalized inverses. Linear Algebra Appl. 458, 291–300 (2014

Origin of Shifts in the Surface Plasmon Resonance Frequencies for Au and Ag Nanoparticles

Origin of shifts in the surface plasmon resonance (SPR) frequency for noble metal (Au, Ag) nanoclusters are discussed in this book chapter. Spill out of electron from the Fermi surface is considered as the origin of red shift. On the other hand, both screening of electrons of the noble metal in porous media and quantum effect of screen surface electron are considered for the observed blue shift in the SPR peak position.Comment: 37 pages, 14 Figures in the submitted book chapter of The Annual Reviews in Plasmonics, edited by Professor Chris D. Geddes. Springer Scinec