17 research outputs found
Three-element filtering antenna array designed by the equivalent circuit approach
©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper introduces a design methodology of a third-order three-element patch array that has no filtering parts and yet behaves like a filtering antenna (filtenna). The design approach includes shaping the frequency response of the reflection coefficient and modeling the frequency response of the normalized realized gain. In order to control the shape of these two responses, gi coefficients of an equivalent low-pass prototype filter are derived for designing the third-order filtering antenna array. The design methodology was verified over the frequency band from 4.8 to 6.8 GHz for levels of the reflection coefficient from -10 to -20 dB and for fractional bandwidths from 7% to 14%. The whole design methodology was supported by manufacturing and measuring three third-order filtering antenna arrays designed with different configurations. The simulated and measured results show good agreement in all cases.Peer ReviewedPostprint (author's final draft
Novel formulation of coefficients of low-pass prototype filter for the design of fourelement planar filtering antenna array
The paper is focused on a formulation of a new coefficient of the low-pass prototype filter for the design of a four-element filtering antenna array. Due to the new gicoefficients, we can comfortably and easily control a shape of the frequency responses of the reflection coefficient and normalized realized gain. The described process of the design methodology and new gicoefficients were verified over the frequency band from 4.8 GHz to 6.8 GHz; for fractional bandwidth from 8 % to 12 % and for level of the reflection coefficient from -10 dB to -20 dB. The whole design
methodology was supported by comparison of three samples of filtering antenna arrays with different configuration.Peer Reviewe
Equivalent circuits of planar filtering antennas fed by apertures
The paper is focused on a design of a three-element filtering patch antenna array using an equivalent-circuit approach. The array is requested to exhibit a prescribed frequency response of a realized gain which corresponds to the output signal of a band-pass filter. When implementing the antenna, no filter elements are allowed to be used. Such an antenna can become a good candidate for the design of filtering antennas (filtennas). We present an equivalent circuit of such an antenna array. The equivalent circuit is validated by a full-wave model of the antenna. The equivalent circuit is transformed to a low-pass prototype filter. The low-pass prototype filter is intended to be exploited for the synthesis of filtering antenna arrays.Peer Reviewe
Novel formulation of coefficients of low-pass prototype filter for the design of fourelement planar filtering antenna array
The paper is focused on a formulation of a new coefficient of the low-pass prototype filter for the design of a four-element filtering antenna array. Due to the new gicoefficients, we can comfortably and easily control a shape of the frequency responses of the reflection coefficient and normalized realized gain. The described process of the design methodology and new gicoefficients were verified over the frequency band from 4.8 GHz to 6.8 GHz; for fractional bandwidth from 8 % to 12 % and for level of the reflection coefficient from -10 dB to -20 dB. The whole design
methodology was supported by comparison of three samples of filtering antenna arrays with different configuration.Peer Reviewe
Equivalent circuits of planar filtering antennas fed by apertures
The paper is focused on a design of a three-element filtering patch antenna array using an equivalent-circuit approach. The array is requested to exhibit a prescribed frequency response of a realized gain which corresponds to the output signal of a band-pass filter. When implementing the antenna, no filter elements are allowed to be used. Such an antenna can become a good candidate for the design of filtering antennas (filtennas). We present an equivalent circuit of such an antenna array. The equivalent circuit is validated by a full-wave model of the antenna. The equivalent circuit is transformed to a low-pass prototype filter. The low-pass prototype filter is intended to be exploited for the synthesis of filtering antenna arrays.Peer Reviewe
Three-element filtering antenna array designed by the equivalent circuit approach
©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper introduces a design methodology of a third-order three-element patch array that has no filtering parts and yet behaves like a filtering antenna (filtenna). The design approach includes shaping the frequency response of the reflection coefficient and modeling the frequency response of the normalized realized gain. In order to control the shape of these two responses, gi coefficients of an equivalent low-pass prototype filter are derived for designing the third-order filtering antenna array. The design methodology was verified over the frequency band from 4.8 to 6.8 GHz for levels of the reflection coefficient from -10 to -20 dB and for fractional bandwidths from 7% to 14%. The whole design methodology was supported by manufacturing and measuring three third-order filtering antenna arrays designed with different configurations. The simulated and measured results show good agreement in all cases.Peer Reviewe