Molecular dynamics simulations of oxide memristors: thermal effects

We have extended our recent molecular-dynamic simulations of memristors to include the effect of thermal inhomogeneities on mobile ionic species appearing during operation of the device. Simulations show a competition between an attractive short-ranged interaction between oxygen vacancies and an enhanced local temperature in creating/destroying the conducting oxygen channels. Such a competition would strongly affect the performance of the memristive devices.Comment: submit/0169777; 6 pages, 4 figure

Synthesis of Silver Nanoparticles Using Curcumin-Cyclodextrins Loaded into Bacterial Cellulose-Based Hydrogels for Wound Dressing Applications.

Chronic wounds are often recalcitrant to treatment because of high microbial bioburden and the problem of microbial resistance. Silver is a broad-spectrum natural antimicrobial agent with wide applications extending to proprietary wound dressings. Recently, silver nanoparticles have attracted attention in wound management. In the current study, the green synthesis of nanoparticles was accomplished using a natural reducing agent, curcumin, which is a natural polyphenolic compound that is well-known as a wound-healing agent. The hydrophobicity of curcumin was overcome by its microencapsulation in cyclodextrins. This study demonstrates the production, characterization of silver nanoparticles using aqueous curcumin:hydroxypropyl-β-cyclodextrin complex and loading them into bacterial cellulose hydrogel with moist wound-healing properties. These silver nanoparticle-loaded bacterial cellulose hydrogels were characterized for wound-management applications. In addition to high cytocompatibility, these novel dressings exhibited antimicrobial activity against three common wound-infecting pathogenic microbes , , and

Characterisation and In Vitro Antimicrobial Activity of Biosynthetic Silver-loaded Bacterial Cellulose Hydrogels

Wounds that remain in the inflammatory phase for a prolonged period of time are likely to be colonised and infected by a range of commensal and pathogenic microorganisms. Treatment associated with these types of wounds mainly focuses on controlling infection and providing an optimum environment capable of facilitating re-epithelialisation, thus promoting wound healing. Hydrogels have attracted vast interest as moist wound-responsive dressing materials. In the current study, biosynthetic bacterial cellulose hydrogels synthesised by Gluconacetobacter xylinus and subsequently loaded with silver were characterised and investigated for their antimicrobial activity against two representative wound infecting pathogens, namely S. aureus and P. aeruginosa. Silver nitrate and silver zeolite provided the source of silver and loading parameters were optimised based on experimental findings. The results indicate that both AgNO3 and AgZ loaded biosynthetic hydrogels possess antimicrobial activity (p < .05) against both S. aureus and P. aeruginosa and may therefore be suitable for wound management applications

Production and Characterisation of Bacterial Cellulose Hydrogels Loaded with Curcumin Encapsulated in Cyclodextrins as Wound Dressings

Natural bioactive materials with wound healing properties such as curcumin are attracting interest due to the emergence of resistant bacterial strains. The hydrophobicity of curcumin has been counteracted by using solubility enhancing cyclodextrins. Hydrogels facilitate wound healing due to unique properties and 3D network structures which allows encapsulation of healing agents. In this study, biosynthetic cellulose produced by Gluconacetobacter xylinus (ATCC 23770) was loaded with water soluble curcumin:hydroxypropyl-β-cyclodextrin supramolecular inclusion complex produced by a solvent evaporation method to synthesise hydrogel dressings. The ratios of solvents to solubilise curcumin and hydroxypropyl-β-cyclodextrin were tested for the production of the inclusion complex with optimum encapsulation efficacy. The results confirmed that hydroxypropyl-β-cyclodextrin enhanced the aqueous solubility of curcumin and allowed loading into bacterial cellulose hydrogels. These hydrogels were characterised for wound management applications and exhibited haemocompatability, cytocompatability, anti-staphylococcal and antioxidant abilities and therefore support the potential use of the curcumin:hydroxypropyl-β-cyclodextrin-loaded-bacterial cellulose as hydrogel dressings

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Ti has a high affinity for hydrogen and are typical hydride formers . Ti -hydride are brittle phases which probably cause premature failure of Ti -alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen di stribution in a set of specimens of commercially pure Ti , model and commercial Ti -alloys. Although likely partly introduced during specimen preparation with the focused- ion beam, we show formation of Ti-hydrides along α grain boundaries and α / β phase boundaries in commercial pure Ti and α + β binary model alloys . No hydrides are observed in the α phase in alloys with Al addition or quenched-in Mo supersaturation

In-Service Oxidation and Microstructural Evolution of a Nickel Superalloy in a Formula 1 Car Exhaust

The oxidation response and microstructural evolution of an Inconel 625 alloy exhaust manifold exposed to an automobile racing environment has been examined using a range of advanced electron microscopy-based techniques, atom probe tomography and high-sensitivity laser ablation mass spectrometry. The dynamic, corrosive gas conditions result in accelerated oxidation, with the inner exhaust surface also heavily contaminated by multiple species including Zn, P, K and Na. Nb carbides and Ti nitrides identified in stock control samples evolve into mixed (Ti, Nb)N species during exposure, decorated by smaller Mo, Si-rich precipitates. The exposed alloy component therefore reveals unique surface and subsurface features following in-service use.LA-ICPMS experiments were carried out in the Department of Earth Sciences with thanks to Prof. Bernard Wood, financially supported by ERC Grant 267764. E.S. Kiseeva was supported by NERC Grant NE/L010828/1. Additional EPMA experiments were carried out at the School of Geosciences, University of Edinburgh with thanks to Dr. Chris Hayward. A. Radecka was supported by Prof. David Dye at Imperial College London and Prof. Dave Rugg in Rolls-Royce plc. for facilities to prepare samples

Magnetoresistance in Sn-Doped In2O3Nanowires

In this work, we present transport measurements of individual Sn-doped In2O3nanowires as a function of temperature and magnetic field. The results showed a localized character of the resistivity at low temperatures as evidenced by the presence of a negative temperature coefficient resistance in temperatures lower than 77 K. The weak localization was pointed as the mechanism responsible by the negative temperature coefficient of the resistance at low temperatures

Simultaneous saccharification and fermentation of hydrothermal pretreated lignocellulosic biomass: evaluation of process performance under multiple stress conditions

Industrial lignocellulosic bioethanol processes are exposed to different environmental stresses (such as inhibitor compounds, high temperature, and high solid loadings). In this study, a systematic approach was followed where the liquid and solid fractions were mixed to evaluate the influence of varied solid loadings, and different percentages of liquor were used as liquid fraction to determine inhibitor effect. Ethanol production by simultaneous saccharification and fermentation (SSF) of hydrothermally pretreated Eucalyptus globulus wood (EGW) was studied under combined diverse stress operating conditions (3038 °C, 6080 g of liquor from hydrothermal treatment or autohydrolysis (containing inhibitor compounds)/100 g of liquid and liquid to solid ratio between 4 and 6.4 g liquid in SSF/g unwashed pretreated EGW) using an industrial Saccharomyces cerevisiae strain supplemented with low-cost byproducts derived from agro-food industry. Evaluation of these variables revealed that the combination of temperature and higher solid loadings was the most significant variable affecting final ethanol concentration and cellulose to ethanol conversion, whereas solid and autohydrolysis liquor loadings had the most significant impact on ethanol productivity. After optimization, an ethanol concentration of 54 g/L (corresponding to 85 % of conversion and 0.51 g/Lh of productivity at 96 h) was obtained at 37 °C using 60 % of autohydrolysis liquor and 16 % solid loading (liquid to solid ratio of 6.4 g/g). The selection of a suitable strain along with nutritional supplementation enabled to produce noticeable ethanol titers in quite restrictive SSF operating conditions, which can reduce operating cost and boost the economic feasibility of lignocellulose-to-ethanol processes.The authors thank the financial support from the Strategic Project of UID/BIO/04469/2013 CEB Unit and A Romaní postdoctoral grant funded by Xunta of Galicia (Plan I2C, 2014)