Alcohol intake and mortality risk of COVID-19, pneumonia, and other infectious diseases: An analysis of 437191 UK biobank participants

This study aims to investigate the association between alcohol consumption and COVID-19, infectious diseases, and pneumonia mortality. This is a prospective analysis of 437,191 UK Biobank participants (age 56.3 years, 54% female). The main exposure was self-reported alcohol consumption. In addition to never and previous drinkers, we applied quartiles-based and UK guidelines-based criteria to divide current drinkers by weekly consumption into four groups. Outcomes included COVID-19, infectious diseases, and pneumonia mortality, obtained from the national death registries until May 2020. After an 11-year follow-up, compared to never drinkers, previous drinkers had higher mortality risks of infectious diseases and pneumonia (adjusted HR: 1.29 [95% CI 1.06–1.57] and 1.35 [1.07–1.70], respectively), but not COVID-19. There was a curvilinear association of alcohol consumption with infectious diseases and pneumonia mortality. Drinking within-guidelines (<14 UK units/wk) and amounts up to double the recommendation (14 to < 28 UK units/wk) was associated with the lowest mortality risks of infectious diseases (0.70 [0.59–0.83] and 0.70 [0.59–0.83], respectively) and pneumonia (0.71 [0.58–0.87] and 0.72 [0.58–0.88], respectively). Alcohol consumption was associated with lower risks of COVID-19 mortality (e.g., drinking within-guidelines: 0.53 [0.33–0.86]). Drinkers reporting multiples of the recommended alcohol drinking amounts did not have higher mortality risks of COVID-19 and other infectious diseases than never drinkers. Despite the well-established unfavorable effects on general health, we found no deleterious associations between alcohol consumption and the risk of infectious diseases, including COVID-19. Future research with other study designs is needed to confirm the causality

Innovative denim fabric design by color coating using laser etching and hollowing technologies

Author name used in this publication: JIANG Shou-xiangRefereed conference paper2014-2015 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe

Analysis of Kif5b Expression during Mouse Kidney Development

published_or_final_versio

Anatomical and Physiological Plasticity in Leymus chinensis (Poaceae) along Large-Scale Longitudinal Gradient in Northeast China

Although it has been widely accepted that global changes will pose the most important constrains to plant survival and distribution, our knowledge of the adaptive mechanism for plant with large-scale environmental changes (e.g. drought and high temperature) remains limited.An experiment was conducted to examine anatomical and physiological plasticity in Leymus chinensis along a large-scale geographical gradient from 115° to 124°E in northeast China. Ten sites selected for plant sampling at the gradient have approximately theoretical radiation, but differ in precipitation and elevation. The significantly increasing in leaf thickness, leaf mass per area, vessel and vascular diameters, and decreasing in stoma density and stoma index exhibited more obvious xerophil-liked traits for the species from the moist meadow grassland sites in contrast to that from the dry steppe and desert sites. Significant increase in proline and soluble sugar accumulation, K(+)/Na(+) for the species with the increasing of stresses along the gradient showed that osmotic adjustment was enhanced.Obvious xerophytic anatomical traits and stronger osmotic adjustment in stress conditions suggested that the plants have much more anatomical and physiological flexibilities than those in non-stress habitats along the large-scale gradient

Structure and microstructure evolution of Al-Mg-Si alloy processed by equal-channel angular pressing

An ultrafine grained Al–Mg–Si alloy was prepared by severe plastic deformation using the equal-channel angular pressing (ECAP) method. Samples were ECAPed through a die with an inner angle of F = 90° and outer arc of curvature of ¿ = 37° from 1 to 12 ECAP passes at room temperature following route Bc. To analyze the evolution of the microstructure at increasing ECAP passes, X-ray diffraction and electron backscatter diffraction analyses were carried out. The results revealed two distinct processing regimes, namely (i) from 1 to 5 passes, the microstructure evolved from elongated grains and sub-grains to a rather equiaxed array of ultrafine grains and (ii) from 5 to 12 passes where no change in the morphology and average grain size was noticed. In the overall behavior, the boundary misorientation angle and the fraction of high-angle boundaries increase rapidly up to 5 passes and at a lower rate from 5 to 12 passes. The crystallite size decreased down to about 45 nm with the increase in deformation. The influence of deformation on precipitate evolution in the Al–Mg–Si alloy was also studied by differential scanning calorimetry. A significant decrease in the peak temperature associated to the 50% of recrystallization was observed at increasing ECAP passes.Peer ReviewedPreprin

Mineral maturity and crystallinity index are distinct characteristics of bone mineral

The purpose of this study was to test the hypothesis that mineral maturity and crystallinity index are two different characteristics of bone mineral. To this end, Fourier transform infrared microspectroscopy (FTIRM) was used. To test our hypothesis, synthetic apatites and human bone samples were used for the validation of the two parameters using FTIRM. Iliac crest samples from seven human controls and two with skeletal fluorosis were analyzed at the bone structural unit (BSU) level by FTIRM on sections 2–4 lm thick. Mineral maturity and crystallinity index were highly correlated in synthetic apatites but poorly correlated in normal human bone. In skeletal fluorosis, crystallinity index was increased and maturity decreased, supporting the fact of separate measurement of these two parameters. Moreover, results obtained in fluorosis suggested that mineral characteristics can be modified independently of bone remodeling. In conclusion, mineral maturity and crystallinity index are two different parameters measured separately by FTIRM and offering new perspectives to assess bone mineral traits in osteoporosis

Polymorphisms in the multiple drug resistance protein 1 and in P-glycoprotein 1 are associated with time to event outcomes in patients with advanced multiple myeloma treated with bortezomib and pegylated liposomal doxorubicin

Single nucleotide polymorphisms (SNPs) in the multiple drug resistance protein 1 (MRP1) and P-glycoprotein 1 (MDR1) genes modulate their ability to mediate drug resistance. We therefore sought to retrospectively evaluate their influence on outcomes in relapsed and/or refractory myeloma patients treated with bortezomib or bortezomib with pegylated liposomal doxorubicin (PLD). The MRP1/R723Q polymorphism was found in five subjects among the 279 patient study population, all of whom received PLD + bortezomib. Its presence was associated with a longer time to progression (TTP; median 330 vs. 129 days; p = 0.0008), progression-free survival (PFS; median 338 vs. 129 days; p = 0.0006), and overall survival (p = 0.0045). MDR1/3435(C > T), which was in Hardy–Weinberg equilibrium, showed a trend of association with PFS (p = 0.0578), response rate (p = 0.0782) and TTP (p = 0.0923) in PLD + bortezomib patients, though no correlation was found in the bortezomib arm. In a recessive genetic model, MDR1/3435 T was significantly associated with a better TTP (p = 0.0405) and PFS (p = 0.0186) in PLD + bortezomib patients. These findings suggest a potential role for MRP1 and MDR1 SNPs in modulating the long-term outcome of relapsed and/or refractory myeloma patients treated with PLD + bortezomib. Moreover, they support prospective studies to determine if such data could be used to tailor therapy to the genetic makeup of individual patients

Electrospray deposition and direct patterning of polylactic acid nanofibrous microcapsules for tissue engineering

Electrospun nanofibers composed of biodegradable polymers are attractive candidates for cell culture scaffolds in tissue engineering. Their fine-meshed structures, resembling natural extracellular matrices, effectively interact with cell surfaces and promote cell proliferation. The application of electrospinning, however, is limited to two-dimensional (2D) or single tube-like scaffolds, and the fabrication of arbitrary three-dimensional (3D) scaffolds from electrospun nanofibers is still very difficult due to the fibers’ continuous and entangled form. To address this issue, in this paper, we describe the use of phase-separation-assisted electrospray and electrostatic focusing to perform continuous direct 3D patterning of nanofibrous microcapsules of biodegradable polylactic acid (PLA). These microcapsules exhibit fiber-particle duality because they are composed of nanofibers suitable for cell attachment while also being easy to handle as particles for direct 3D patterning. By varying the flow rate of the polymer solution and the humidity of the electrospray atmosphere during electrospraying, the diameter of the microcapsule and its surface porosity can be controlled. The utility of the direct-patterning process is demonstrated by fabricating high-aspect-ratio microscaffolds and subsequent cell cultures. The nanofibrous and hollow structure of the microcapsules combined with the direct 3D patterning process offers a new approach for fabricating tailor-made scaffolds for regenerative medicine