Evolution of grain grading and characteristics in repeatedly reconstituted assemblages subject to one-dimensional compression

published_or_final_versio

Insertion of Provox®2 voice prosthesis using the anterograde technique immediately after the secondary tracheoesophageal puncture

Insertion of a voice prosthesis through the tracheoesophageal puncture (TEP) is one way to restore the voice after total laryngectomy. The second generation Provox voice prosthesis is presently one of the most popular devices. Although TEP can be done primarily, there are many centres that prefer it to be done at a second stage for various reasons. However, secondary TEP for retrograde replacement of prosthesis can be difficult and general anaesthesia is very often necessary. Moreover, the presence of neck stiffness and fibrosis from the surgery or previous radiotherapy could affect the neck extension for proper positioning of the trocar. Similarly, it is difficult to insert the prosthesis if there is stenosis at the pharyngoesophageal segment. We describe a technique in which creation of secondary TEP and insertion of Provox2 is done with local anaesthesia under the same setting. The procedure is well tolerated and can be safely performed on an out-patient basis.published_or_final_versio

Extending the Liaison Workflow Model and Engine to Support Different Signature Purposes

Currently, many software systems are developed in offices geographically distributed in different locations. Furthermore, it is also common for a software system development project to contract to different software houses. These contracted software development projects, very often, are further sub-contracted to some other software houses. These software development modes can be supported and managed by good distributed workflow systems. Signatures play an important role in these software development modes. Most workflow systems, at best, can only support digital signatures. Digital signatures with public key cryptosystem are limited to authentication, integrity, confidentiality and non-repudiation. The wide variety of signature purposes such as authorization or multiple signatures in group decision making are not supported explicitly by most workflow systems. We have studied different kinds of signature in software development and workflow systems. The paper discusses the problems and solutions of incorporating these signatures in a distributed workflow engine, in particular, the Liaison Workflow Engine, to support the contemporary modes of software developments.published_or_final_versio

Feedback Stabilization of a Class of Diagonal Infinite-Dimensional Systems with Delay Boundary Control

This paper studies the boundary feedback stabilization of a class of diagonal infinite-dimensional boundary control systems. In the studied setting, the boundary control input is subject to a constant delay while the open loop system might exhibit a finite number of unstable modes. The proposed control design strategy consists in two main steps. First, a finite-dimensional subsystem is obtained by truncation of the original Infinite-Dimensional System (IDS) via modal decomposition. It includes the unstable components of the infinite-dimensional system and allows the design of a finite-dimensional delay controller by means of the Artstein transformation and the pole-shifting theorem. Second, it is shown via the selection of an adequate Lyapunov function that 1) the finite-dimensional delay controller successfully stabilizes the original infinite-dimensional system; 2) the closed-loop system is exponentially Input-to-State Stable (ISS) with respect to distributed disturbances. Finally, the obtained ISS property is used to derive a small gain condition ensuring the stability of an IDS-ODE interconnection.Comment: Preprin

Fluorescent sensing and determination of mercury (II) ions in water

The presence of heavy metals released from industrial activities into water streams is an ever-growing challenge to ensuring a safe and clean aquatic environment. Detection and determination of the levels of these heavy metals in wastewater is an important step before any measures can be taken. In this study we report on a fluorescent sensing probe based on a naphthyl azo dye modified dibenzo-18-crown-6-ether (DB18C6) for the detection and determination of mercury (II) ions in water. The probe showed high sensitivity and selectivity towards the mercury (II) ion among various alkali, alkaline earth, and transition metal ions. The mercury (II) ion quenched the fluorescence of the probe. Stern-Volmer quenching constants (Ksv) were found to be highest for Hg2+ ion at 1.18 x 105 M-1 compared to 3.85 x 104 M-1 for copper (II) ion. The stoichiometry of the sensor–metal ion interaction was found to be 1:1 for both metal ions using Job plots. The detection limit for Hg2+ was 1.25 x 10-8 M. The dye modified crown ether was then used to detect mercury in a water sample from a coal-fired power plant and to determine the amount of mercury in the water sample.Keywords: azo dye, crown ether, fluorescence, mercury (II), sensor, wate

Differential expression, localization and activity of two alternatively spliced isoforms of human APC regulator CDH1

The timely destruction of key regulators through ubiquitin-mediated proteolysis ensures the orderly progression of the cell cycle. The APC (anaphase-promoting complex) is a major component of this degradation machinery and its activation is required for the execution of critical events. Recent studies have just begun to reveal the complex control of the APC through a regulatory network involving WD40 repeat proteins CDC20 and CDH1. In the present paper, we report on the identification and characterization of human CDH1β, a novel alternatively spliced isoform of CDH1. Both CDH1α and CDH1β can bind to the APC and stimulate the degradation of cyclin B1, but they are differentially expressed in human tissues and cells. CDH1α contains a nuclear localization signal which is absent in CDH1β. Intracellularly, CDH1α appears in the nucleus whereas CDH1β is a predominantly cytoplasmic protein. The forced overexpression of CDH1α in cultured cells correlates with the reduction of nuclear cyclin A, but the steady-state amount of cyclin A does not change noticeably in CDH1β-overexpressed cells. In Xenopus embryos, ectopic overexpression of human CDH1α, but not of CDH1β, induces cell-cycle arrest during the first G1 phase at the midblastula transition. Taken together, our findings document the differential expression, subcellular localization and cell-cycle-regulatory activity of human CDH1 isoforms.postprin

Characterisation of natural organic matter (NOM) and its removal using cyclodextrin polyurethanes

Natural organic matter (NOM) occurs in all natural water sources when animal and plant material breaks down. NOM in water may react with chlorine and other disinfectants to produce disinfection by-products (DBPs), many of which are either carcinogenic or mutagenic. In this study the NOM content of the raw water from the Vaalkop Water Treatment Plant (which uses both chlorination and ozonation as treatment protocols) was characterised after fractionation on ion-exchange resins. Fractionation at different pH values resulted in the isolation of a neutral, a basic and an acidic component of either predominantly hydrophobic or hydrophilic NOM. In addition, NOM results from 3 open water bodies in Johannesburg were evaluated in the same manner. As expected, NOM from all water sources was predominantly hydrophobic (~60%). Each of the 6 isolated NOM fractions was percolated through synthetic cyclodextrin (CD) polyurethanes to determine the extent to which the CD polymers can remove NOM from water. The hydrophobic basic fraction and the hydrophilic acid fraction were most efficiently removed (24% and 10%, respectively). The remaining fractions were not much affected by the polymer treatment

Natural organic matter (NOM) in South African waters: NOM characterisation using combined assessment techniques

In order to remove natural organic matter (NOM) from water in a water treatment train, the composition of the NOM in the source water must be taken into account, especially as it may not necessarily be uniform since the composition is dependent on the local environment. The main thrust of this study was to ascertain whether a cocktail of characterisation protocols could help to determine the nature, composition and character of NOM in South African waters. The characterisation of South African water sources was done by sampling 8 different water treatment plants located within the 5 major source water types in South Africa. The NOM composition of all of the samples was first studied by applying conventional techniques (UV, DOC, SUVA and bulk water parameters). NOM characterisation was then further conducted using advanced techniques (BDOC, PRAM and FEEM), which were aimed at developing rapid assessment protocols. The FEEM and UV results revealed that the samples consisted mainly of humic substances with a high UV-254 absorbance, while some samples had marine humic substances and non-humic substances. The samplefs DOC results were within the range of 3.5 to 22.6 mgE..1 C, which was indicative of the extent of variation of NOM quantities in the regions where samples were obtained. The BDOC fraction of the NOM ranged between 12 and 66%, depending on the geographical location of the sampling site. A modified PRAM was utilised to characterise the changes in NOM polarity in the water treatment process. PRAM results also indicated that the NOM samples were mostly hydrophobic. The composition and character of the NOM was found to vary from one water treatment plant to another. Combining conventional and advanced techniques could be a powerful tool for NOM characterisation and for extracting detailed information on NOM character, which should inform its treatability